TOTAL POWER INT'L SP-320 320W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Forced air cooling by built-in DC Fan Built-in fan speed control Fixed switching frequency at 100KHz 3 years warranty SPECIFICATION MODEL OUTPUT SP-320-5 SP-320-7.5 SP-320-12 SP-320-13.5 SP-320-15 SP-320-24 SP-320-27 DC VOLTAGE 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 55A 40A 25A 22A 20A 13A 11.7A 6.7A CURRENT RANGE 0 ~ 60A 0 ~ 40A 0 ~ 25A 0 ~ 22A 0 ~ 20A 0 ~ 13A 0 ~ 11.7A 0 ~ 6.7A RATED POWER 275W 300W 300W 297W 300W 312W 315.9W 321.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 6 ~ 9V 2.0% 10 ~ 13.2V 1.0% 12 ~ 15V 1.0% 13.5 ~ 18V 1.0% 20 ~ 26.4V 1.0% 26 ~ 32V 41 ~ 56V VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION INPUT 4.5 ~ 5.5V 2.0% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47~63Hz POWER FACTOR PF>0.95/230VAC EFFICIENCY (Typ.) 79% 83% AC CURRENT INRUSH CURRENT (max.) 5A/115VAC 22A/115VAC 2.5A/230VAC 40A/230VAC LEAKAGE CURRENT <1mA / 240VAC OVER LOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 5.75 ~ 6.75V WORKING TEMP. 1.0% 0.5% 800ms, 50ms, 16ms/230VAC OVER TEMPERATURE 1.0% 0.5% SETUP, RISE, HOLD TIME PROTECTION OVER VOLTAGE SP-320-48 2500ms, 50ms, 16ms/115VAC at full load 120 ~ 370VDC PF>0.98/115VAC at full load 86% 86% 86% 87% 88% 89% 33.7 ~ 39.2V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 80 5 (70 5 5V only) (TSW1 : Detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 4) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A MTBF 207K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.2Kg; 12pcs / 14.4Kg / 0.98CUFT DIMENSION PACKING NOTE ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. USSPP--33222005 320W Single Output with PFC Function Mechanical Specification Case No. 912 ssee rr iieess Unit:mm 117.5 32.5 150 27.5 177.5 36.7 LED +V ADJ. 9 50 6 115 95 9.5 135 8 7 5 4-M4 L=5mm 48.7 8 3 32.5 5-M3 L=3mm 2 16 5 10 1 50.5 4 15 215 32.5 25 150 50 14 Air flow direction 4-M4 L=5mm Terminal pin number assignment : Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. Assignment 4~6 DC OUTPUT -V 7~9 DC OUTPUT +V Derating Curve Static Characteristics (5V) Ta=25 100 Others 80 LOAD (%) LOAD (%) 60 40 5V 20 -20 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 ) 60 70 100 300 90 250 80 200 70 150 60 100 50 50 40 25 88 90 95 100 115 135 155 175 195 INPUT VOLTAGE (VAC) 60Hz 230 264