SHM15UF - SHM140UF and SHM15UFSMS - SHM140UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 50-250 mA 1500 ─ 14000 VOLTS 60-100 nsec HIGH VOLTAGE RECTIFIER Part Number / Ordering Information 1/ SHM_ _ UF __ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L L 2/ L Screening = None TX = TX Level TXV = TXV Level S = S Level Package ____ = Axial SMS = Surface Mount Square Tab FEATURES: Recovery Time • • • • • • • UF = Ultra Fast Voltage 15 = 1500 20 = 2000 25 = 2500 30 = 3000 40 = 4000 50 = 5000 60 = 6000 80 = 8000 100 = 10000 120 = 12000 140 = 14000 Ultra Fast Recovery: 60-100 nsec Maximum PIV to 14000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available2/ ELECTRICAL CHARACTERISTICS Part Number Symbol Peak Inverse Voltage PIV Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance I0 IR @ PIV VF IFSM trr CJ mA μA Volts Amps nsec pF Units Conditions SHM15UF SHM20UF SHM25UF SHM30UF SHM40UF SHM50UF SHM60UF SHM80UF SHM100UF SHM120UF SHM140UF Volts 1500 2000 2500 3000 4000 5000 6000 8000 10000 12000 14000 25°C 250 250 250 150 150 150 100 100 100 100 50 100°C L 150 150 150 SMS 145 145 145 90 90 90 60 60 60 60 30 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25 25 25 25 25 25 25 25 25 25 25 10 10 10 14 14 14 20 20 20 22 26 15 15 15 10 10 10 5 5 5 5 1 60 60 60 60 60 60 60 60 60 60 100 8 8 8 4 4 4 2 2 2 2 2 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Leaded DATA SHEET #: RV0015C Typical Thermal Impedance θJE θJL L = 3/8” °C/W 55 55 55 55 55 55 55 55 55 55 85 SMS DOC 65 65 65 65 65 65 65 65 65 65 95 SHM15UF - SHM140UF and SHM15UFSMS - SHM140UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Case Outline: (Axial) D DIMENSIONS: SHM15-50 B D ØC ØA DIM MIN MAX A --- .140” B --- .300” C .025” .033” D 1.0” --- DIMENSIONS: SHM60-140 DIM MIN MAX A --- .140” B --- .400” C .025” .033” D 1.0” --- PACKAGE OUTLINE: Surface Mount Square Tab DIMENSIONS: SHM15-50 DIM MIN MAX A .127” .140” B .280” .320” C .022” .028” D .002” --- DIMENSIONS: SHM60-140 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM MIN MAX A .127” .140” B .360” .450” C .022” .028” D .002” --- DATA SHEET #: RV0015C DOC