Tyco/ Electronics PRODUCT: RHE400 Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch® PTC Devices DOCUMENT: SCD 24794 PCN: F70630 REV LETTER: D REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V DC MAX Current: 100A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements LEAD MATERIAL: 24 AWG Tin/Lead plated Copper Clad Steel (0.5 mm [0.020] nom. diameter) PART MARKING: Raychem Logo and Voltage 16 Part Identification H4 Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -11.4 -18.0 -(0.45) -(0.71) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD RATED CURRENT AMPS 25°C HOLD 4.0 CURRENT TRIP LIMITS AMPS AMPS AMPS AT 0°C AT 25°C AT 60°C HOLD TRIP HOLD TRIP HOLD TRIP ------4.0 7.0 ------- Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TIME TO TRIP RESISTANCE VALUES SECONDS AT 25°C, 20A MAX 8.0 OHMS AT 25°C MIN MAX 0.018 0.029 ONE-HOUR POST-TRIP RESISTANCE STANDARD TRIP SECONDS AT 25°C MAX 0.044 TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C 16V TYP 2.0 UL, TUV, CSA recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Tyco/ Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PRODUCT: RHE400 PolySwitch® PTC Devices Overcurrent Protection Device DOCUMENT: SCD 24794 PCN: F70630 REV LETTER: D REV DATE: OCTOBER 8, 2001 PAGE NO.: 2 OF 1