Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Accessory Outlet Filter EBF Series UL Recognized CSA Certified VDE Approved EBF1 EBF4 EBF Series Specifications • Accessory IEC 60320-1 C13 filtered outlet • Allows connection of accessories while filtering noise between a system and the accessory • Enhanced performance across the frequency range • Grounded connection • Suitable for international usage Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: .25 mA @250 VAC 50 Hz: .50 mA Hipot rating (one minute): Line to Ground: Line to Line: 2250 VDC 1450 VDC Rated Voltage (max.): 250 VAC Operating Frequency: 50/60 Hz Rated Current: Ordering Information 3 EBF 1 Output Styles 1 – .250 [6.3] spade terminals 4 – Wire leads (bottom) 1 to 10A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Electrical Schematic EBF Series ACCESSORY OUTLET LINE Current Rating 1, 3, 6, or 10A Available Part Numbers 1EBF1 3EBF1 6EBF1 10EBF1 1EBF4 3EBF4 6EBF4 10EBF4 138 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Accessory Outlet Filter (continued) EBF Series Case Styles Case Dimensions EBF1 Part No. C EBF1 D E A B EBF4 A B C D E EBF4 3 Recommended Panel Cutout E D A B Power Inlet Filters & Power Entry Modules 1.01 25.7 C .14 Dia. 3.6 1.40 35.6 1.575 ± .004 40.0 ± 0.1 .20 R Typ. 5.1 139 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Accessory Outlet Filter (continued) EBF Series Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 1EBF 3EBF 6EBF 10EBF db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0 0 0.1 1 10 30 Frequency in MHz 0.1 1 10 30 Frequency in MHz 10 0.1 1 10 30 Frequency in MHz 0 0.1 1 10 30 Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 140 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com