Light Emitting Diode(InGaAlP/InGaN/GaAsAl) KLP-36M2I-X-X KLP-34M2I is a 5 in 1 full colour LED and 2 ired . DIMENSIONS 3 2 1 1 Features • Transparent epoxy Encapsulent • High Optical Output 4 5 A 6 B 1 G IR1 R IR2 5 6 3 4 Applications • ATM • SENSOR 2 [ Ta=25°C ] Maximum Ratings Parameter Symbol IF Forward Current Peak Forward Current *１ Power Dissipation IFP PD MIN MAX Unit R G - 20 20 mA mA B - 20 mA IR1 - 20 mA IR2 - 20 mA R - 80 mA G - 100 mA B - 100 mA R - 55 mW G - 75 mW B - 75 mW IR1 - 30 mW IR2 - 30 mW Operating Temperature TOP -30 85 °C Storage Temperature Ts Tsol -40 105 260 °C °C Soldering Temperature*２ *1. IFP Measured under duty £ 1/10 @ 1KHz *2. Soldering time £ 5 Sec 1/3 Conditions 5 Sec Light Emitting Diode(InGaAlP/InGaN/GaAsAl) KLP-36M2I-X-X Electro-Optical Characteristics Parameter Forward Voltage Luminous Intensity Dominant Wavelength Peak Wavelength Reverse Current Spectrum Radiation Bandwidth Half angle [ Ta=25°C ] Symbol VF PO WD WP IR ∆λ MIN TYP MAX Unit Conditions R 1.8 - 2.8 V IF=20mA G 2.8 - 3.8 V IF=20mA B 2.8 - 3.8 V IF=20mA IR1 - 1.2 - V IF=20mA IR2 - 1.2 - V IF=20mA R 9 13 17 mW IF=20mA G 5 10 15 mW IF=20mA B 15 21 27 mW IF=20mA IR1 3 7 11 mW IF=20mA IR2 2 5 8 mW IF=20mA R 620 - 630 nm IF=20mA G 520 - 530 nm IF=20mA B 460 - 470 nm IF=20mA IR1 - 850 - nm IF=20mA IR2 - 940 - nm IF=20mA R - - 10 µA VR=5V G - - 10 µA VR=5V B - - 10 µA VR=5V IR1 - - 10 µA VR=5V IR2 - - 10 µA VR=5V R - 20 - nm IF=20mA G - 30 - nm IF=20mA B - 30 - nm IF=20mA IR1 - 50 - nm IF=20mA IR2 - 50 - nm IF=20mA deg IF=20mA ∆Θ 120 2/3 Light Emitting Diode(InGaAlP/InGaN/GaAsAl) KLP-36M2I-X-X Radiant Intensity vs. Forward current 1.5 (IF) 50 40 Relative intensity Forward current IF(mA), Each Chip Forward current vs. Ambient temperature 30 20 10 0 0 20 40 60 1 0.5 (℃) 100 80 0 Ambient temperature Ta Relative radiant intensity PO Relative radiant intensity vs. Ambient temperature 5 0 10 15 20 25 Forward current IF 30 (IF) 35 Relative intensity vs. Wavelength 10 1 0.1 -20 0 20 40 60 80 100 (℃) Ambient temperature Ta Forward current vs. Forward voltage Ired 2 Ired 1 Red 0 +4 Green Blue 0 -20 -4 0 +80 50 -80 -100 10 0 +100 5 0 +20 +60 25 20 15 Angle(deg) 0 -6 Forward current IF 30 Radiant Pattern 0 100 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Forward voltage VF 50 50 Relative intensity(%) 3/3 100