VISHAY P10LXCAG502KB4

P10L
Vishay Sfernice
Long Life Potentiometer - 500 000 Cycles
Miniature - Cermet - Fully Sealed
FEATURES
• 500 000 cycles
• Low temperature coefficient
(± 150 ppm/°C typical)
RoHS
COMPLIANT
• Plastic housing and shaft
• Compact (3/8" square)
• Fully sealed
DIMENSIONS in millimeters (inches) (± 0.5 mm)
P10L: Side Adjust
P10L: Top Adjust
5.2
(0.20)
9.6
(0.38)
3 x Ø 0.5
(0.02)
5.5
(0.22)
3 x Ø 0.5
(0.02)
1
2
3
4 Min.
(0.16)
AI = 20
(0.79)
AG = 16
(0.63)
2.54
(0.10)
1.15
(0.05)
5.5
(0.22)
2.54
(0.10)
9.6
(0.38)
Ø3
(0.12)
9.7
(0.38)
P10LXX
9.7
(0.38)
5.3
(0.21)
Ø3
(0.12)
2.54
(0.10)
M6 x 0.75
M6 x 0.75
1
(0.04)
1
(0.04)
4 Min.
(0.16)
0.6
(0.02)
0.6
(0.02)
1
3
P10LYP
2.54
(0.10)
2.54
(0.10)
P10LXC
1
2
3
2.54
(0.10)
2
5.2 5.3
(0.20) (0.21)
2.7
(0.11)
AI = 20
(0.79)
AG = 16
(0.63)
2.54
(0.10)
2
P10LYE
2.54
(0.10)
2.54
(0.10)
3
1
4.85
(0.19)
2.54
(0.10)
2.54
(0.10)
2.54
(0.10)
1
3
5.08
(0.20)
P10LYM
2
2.54
(0.10)
Document Number: 51057
Revision: 10-Dec-07
For technical questions, contact: [email protected]
2.54
(0.10)
2.25
(0.09)
www.vishay.com
1
P10L
Vishay Sfernice
Long Life Potentiometer - 500 000 Cycles
Miniature - Cermet - Fully Sealed
ELECTRICAL SPECIFICATIONS
Resistive Element
CERMET
Electrical Travel
250° ± 15°
Standard Resistance Values
1 kΩ - 5 kΩ - 10 kΩ - 50 kΩ
Tolerance
20 % - 10 % on request
A
CIRCUIT DIAGRAM
Varation Law
c
a
(3)
(1)
b
(2)
cw
OUTPUT VOLTAGE RATIO (%)
Linear
100
80
60
A
40
20
0
0
20
40
60
80
100
% CLOCKWISE SHAFT ROTATION
LIN. LAW “A”
Power Rating
POWER IN W
0.1
0.1 W at 70 °C
0
0
20
40
60 70 80
100
120 140
AMBIENT TEMPERATURE IN °C
Standard Resistance Element Data
Temperature Coefficient (Typical)
Resistance
Value
Max. Power
at 70 °C
Max. Working
Voltage
(kΩ)
(W)
(V)
1
0.1
10
5
0.1
22.3
10
0.1
31.6
50
0.1
70.7
± 150 ppm/°C
Limiting Element Voltage
Contact Resistance Variation
75 V
1 % Rn or 2 Ω
End Resistance (Typical)
1Ω
Dielectric Strength (RMS)
1000 V
Insulation Resistance (300 VDC)
106 MΩ
Independent Linearity (Typical)
±5%
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 51057
Revision: 10-Dec-07
P10L
Long Life Potentiometer - 500 000 Cycles
Miniature - Cermet - Fully Sealed
Vishay Sfernice
MECHANICAL SPECIFICATIONS
Mechanical Travel
290° ± 5
Operating Torque (Typical)
2 Ncm max.
2.83 oz.-inch max.
End Stop Torque
7 Ncm max.
9.9 oz.-inch max.
Tightening Torque of Mounting Nut
25 Ncm max.
2.2 lb-inch max.
1g
3.5 10-2 oz.
Unit Weight
Terminals
e3: pure Sn
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 40 °C to 100 °C
Climatic Category
40/100/56
Sealing
Fully sealed - Container IP67
MARKING
• VISHAY trademark
• Model
• Ohmic Value code
• Tolerance code
• Manufacturing date code
• Marking of terminals 3
APPLICATION NOTE
c (3)
The potentiometer shall be used in voltage divider with
an impedance load at least 100 times higher than the total
potentiometer nominal resistance value.
cw
(2) b
Advised load impedance:
1 MΩ min. for resistance range of 1kΩ to 50 kΩ
1 MΩ min.
(1) a
Document Number: 51057
Revision: 10-Dec-07
For technical questions, contact: [email protected]
www.vishay.com
3
P10L
Long Life Potentiometer - 500 000 Cycles
Miniature - Cermet - Fully Sealed
Vishay Sfernice
PERFORMANCES
TYPICAL VALUES AND DRIFTS
TESTS
CONDITIONS
Climatic Sequence
ΔRT/RT (%)
ΔR1-2/R1-2 (%)
OTHER
Phase A dry heat 100 °C
Phase B damp heat
Phase C cold - 40 °C
Phase D damp heat 5 cycles
±1%
±2%
-
56 days
40 °C 93 % HR
±1%
±2%
Insulation resistance
> 104 MΩ
500 000 cycles at rated power
Turn angle: ± 50°
33 cycles per min
Temperature: 20 °C
± 20 %
-
Contact resistance
variation max. 35 %
Independent linearity
± 20 %
1000 h at rated power
90'/30'
Ambient temperature 70 °C
± 20 %
± 20 %
Contact resistance
variation max. 30 %
5 cycles
- 40 °C at 100 °C
±1%
<±2%
-
50 g at 11 ms
3 successive shocks
in 3 directions
± 0.5 %
±1%
-
10 - 55 Hz
0.75 mm or 10 g
in 3 directions
± 0.5 %
<±1%
-
Long Term Damp Heat
Rotational Life
Load Life
Rapid Temperature Change
Shock
Vibration
SAP ORDERING INFORMATION (Part Number 18 digits)
P
1
0
L
X
X
A
MODEL
STYLE
SHAFT
P10L
XC
XX
YE
YM
YP
AG = Ø 3 - 16 mm
Al = Ø 3 - 20 mm
G
1
0
2
M
B
4
RESISTANCE
CODE
TOLERANCE
CODE
PACKAGING CODE
SPECIAL
NUMBER
102 = 1 kΩ
502 = 5 kΩ
103 = 10 kΩ
503 = 50 kΩ
M = 20 %
B4 = Box 100 pieces
(if applicable)
Given by
VISHAY
for custom
design
On request
K = 10 %
PART NUMBER DESCRIPTION (for information only)
P10L
XX
AG
1K
20 %
MODEL
STYLE
SHAFT
VALUE
TOLERANCE
www.vishay.com
4
SPECIAL
For technical questions, contact: [email protected]
BO100
e3
PACKAGING
LEAD
(Pb)-FREE
Document Number: 51057
Revision: 10-Dec-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1