PD035VX3 Version :1.0 TECHNICAL MODEL SPECIFICATION NO. : PD035VX3 Customer’s Confirmation Customer By PVI’s Confirmation Confirmed By Prepared By PRIME VIEW INTERNATIONAL CO.,LTD. 3,LI SHIN RD. 1,SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN,R.O.C. http://www.pvi.com.tw Date: July. 27 , 2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PD035VX3 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals 1 2 3 3 3 4 5 10 11 11 12 13 14 15 20 20 24 25 26 - Touch Panel Characteristics Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing Revision History Appendix The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PD035VX3 1. Application This data sheet applies to a color TFT LCD module, PD035VX3. The application of panel are projector and other media application which require high quality flat panel display. 2. Features . Amorphous silicon TFT LCD panel with LED B/L. . Module with resistive type touch panel . . Pixel in stripe configuration . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . TTL transmission interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Surface treatment Surface treatment of Touch Panel Specifications 3.5 (diagonal) 640×(R, G, B)×480 262,144 72 (H)×52.56 (V) 0.1125 (H)×0.1095 (V) Stripe 84.25 (W)×65.40 (H)×4.45 (D) (Typ.) 52±5 AG 3H Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PD035VX3 裸銅鍍金 2.修改 3.修改 為73.3 0.3 為53.90 4.Mechanical Drawing of TFT-LCD Module YU XR XL YD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PD035VX3 5.Input / Output Terminals Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Symbol DIO1 VSS2 VDD1 CLK R/L R0 R1 R2 R3 R4 R5 VSS2 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 VSS2 V3 V5 V7 V8 V10 V12 VSS2 VDD2 VCOM OE U/D CKV STVU STVD VGG VSS1 VCC VEE VLED GLED2 GLED1 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I/O I I I I I I I I I I I I I I/O I/O I I I I - Function Horizontal Start Pulse Signal Input or Output 1 Ground Power Supply Horizontal Shift Clock Left/Right Selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Ground Gamma Voltage 3 Gamma Voltage 5 Gamma Voltage 7 Gamma Voltage 8 Gamma Voltage 10 Gamma Voltage 12 Ground Voltage for analog circuit Common Voltage Output Enable Up/Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Gate Off Voltage Supply voltage for LED backlight Ground for LED backlight Ground for LED backlight Remark Note5 - 1 Note 5 - 1 Note5 - 2 Note5 - 3 Note5 - 4 Note5 - 1 Note5 - 5 Note5 - 5 Note5 - 5 Note5 - 5 Note5 - 5 Note5 - 5 Note5 - 5 Note5 - 6 Note 5 - 7 Note5 - 8 Note5 - 7 Note5 - 7 Note5 - 9 Note5 - 10 Note5 - 11 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PD035VX3 Note 5-1: Select left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-2: Latch the polarity of outputs and switch the new data to outputs At the rising edge (LD), latch the “POL” signal to control the polarity of the outputs. Note 5-3: Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”→”3F”, “07”→”38”, “15”→”2A” Note 5-4: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PD035VX3 Note 5-5: Typical Application Circuit C1 0.1 uF R1 1 VDD2 2 C2 0. 1 uF . 1.2K R2 1 V5 2 V3 OPEN C4 0.1uF R3 1 2 V7 OPEN R4 1 V8 2 C3 0. 1 uF 1K OHM C5 0.1uF R5 1 2 V 10 OPEN R6 1 2 V 12 C6 0. 1 uF OPEN C7 0. 1 uF R7 1 2 1.2K OHM GND Note 5-6: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-7: Select up or down shift U/D STVU 1 Hi-Z 0 Input Note 5-8: Gate driver shift clock STVD Input Hi-Z Shift Down to Up Up to Down Note 5-9: Gate on voltage, VGG= +17V. Note 5-10: Gate off voltage, VEE= -10V. Note 5-11: ILED TYP.=20mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PD035VX3 6.Touch Panel Characteristics 6.1) Pin assignment: Pin Symbol Function Remark 1 XL Upper electrode X( left side) 2 YU Lower electrode(Upper side) 3 XR Upper electrode X( right side) 4 YD Lower electrode(Down side) 6.2) Electrical Performance: Parameters Terminal Resistance Input Voltage Linearity(X ,Y direction) Insulation Impedance Response Time Operation Force Symbol X Y VT MIN. 100 100 Typ. 5.0 MAX. 900 900 7.0 ±1.5 20 5 35 Unit Ω Ω V % MΩ ms g Remark DC 25V Note 6-1 Note 6-1 Input through 0.8R stylus or finger. 6.3) Durability Performance 1. Hitting Durability: At least 1,000,000 times with R8.0mm silicon rubber, 200g , 3times/sec . 2. Sliding Durability: At least 1,00,000 times with R0.8mm polyacetal stylus , 200g , 60mm/sec. 7.Absolute Maximum Ratings: Vss1=Vss2=GND=0V, Ta=25℃ Parameters Supply Voltage Symbol VDD1 VCC VDD2 VGG VGG－VEE MIN. MAX. -0.3 -0.3 2 5 -0.5 -0.3 - 12.0 40.0 40.0 Unit V V V V V Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PD035VX3 VEE TST TOP Storage Temperature Operating Temperature -20 -20 0 0.3 70 60 V ℃ ℃ Notes 7-1 Note7-1 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25. 8.Electrical Characteristics 8-1) Recommended Operating Conditions: Item Supply Voltage for Source Driver Symbol VDD1 VDD2 VGG VEE VCC Supply Voltage for Gate Driver Supply Voltage for Vcom Min. 3.0 9.5 3.0 Vcom Digital Input Voltage VIH VIL Vss1=Vss2=GND = 0V，Ta = 25℃ Typ. Max. Unit Remark 3.3 3.6 V 10 10.5 +17 V -10 V 3.3 3.6 V (2.7) 0.8VDD1 0 - V VDD1 0.2VDD1 V V 8-2) Recommended driving condition for LED backlight GND = 0 V， Ta = 25℃ Parameter Supply voltage of LED backlight Supply current of LED backlight Symbol Min TYP VLED 9 9.6 ILED1 PLED 11.4 20 ILED2 Backlight Power Consumption MAX Unit 360 384 456 V Remark IL = 20 mA mA Note 8-1 mW Note 8-2 Note 8-1 : LED B/L applied information , please refer to the appendix at the end . Note 8-2 : PLED = VLED * ILED1 + VLED * ILED2 . VLED GLED1 VLED GLED2 8-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Symbol Condition Typ. IGG VGG=+17V 0.12 IEE VEE=-10V 0.15 IDD1 VDD1=+3.3V 4.8 Max. Unit 0.15 0.19 8.0 mA mA mA Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PD035VX3 Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption IDD2 ICC Backlight Power Consumption VDD2=+10V VCC=+3.3V PLED Total Power Consumption 16.0 0.17 180 30.0 0.21 332 384 456 mA mA mW mW 564 788 mW 9. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1st Line R G B R G B 2nd Line RG B R G B 3rd Line RGB RGB 1st Pixel 640th Pixel 1 Pixel = R G B R G B 478th Line RG B R G B R G B 479 th Line RGB R G B RG BRG B 480th Line RGB 10. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black Red (63) 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PD035VX3 Basic Colors Red Green Blue Green (63) 0 0 0 0 0 0 Blue (63) 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 White 1 1 1 1 1 1 Red (00) 0 0 0 0 0 0 Red (01) 0 0 0 0 0 1 Red (02) 0 0 0 0 1 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Red (61) 1 1 1 1 0 1 Red (62) 1 1 1 1 1 0 Red (63) 1 1 1 1 1 1 Green (00) 0 0 0 0 0 0 Green (01) 0 0 0 0 0 0 Green (02) 0 0 0 0 0 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Green (61) 0 0 0 0 0 0 Green (62) 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 Blue (00) 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 0 Blue (02) 0 0 0 0 0 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Blue (61) 0 0 0 0 0 0 Blue (62) 0 0 0 0 0 0 Blue (63) 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 1 0 1 0 1 1 0 0 0 1 0 1 0 1 1 0 0 0 1 0 1 0 1 1 0 0 0 1 0 1 0 1 1 0 0 0 1 0 1 0 1 1 0 0 0 0 1 1 1 0 1 0 0 0 0 1 1 1 0 1 0 0 0 0 1 1 1 0 1 0 0 0 0 1 1 1 0 1 0 0 0 0 1 1 1 0 1 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PD035VX3 11. Block Diagram SYSTEM Video Timing Controller (PVI-2003A) User signal input Control V DC-DC Converter Gamma DD 1 V DD 2 Gamma Generator Vcom Generator VGG/VEE Source Driver FPC IC PD035VX3 TFT-LCD Panel Vcom Gate Driver IC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PD035VX3 12. Interface Timing 12.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=10V, GND=VSS1=VSS2=0V, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 25 40 MHz CLK Pulse Width TCPH 25 - - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - TCPH Pulse width of LD Twld 2 - - TCPH Time That LD to DIO1/2 Tlds 5 - - TCPH POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 640 - TCPH Horizontal Period Timing Range THP - 800 - TCPH Horizontal Lines Per Field TV 520 525 640 THP Vertical Display Timing Range TDV - 480 - THP 12.2) Timing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 30% Tphl First data (Output) DIO1/2 REV Data (Input) DIO1/2 CLK 70% Tsu 70% Thd 70% 70% Tsu 70% 1 Thd Tcph 2 Second data Fig. 11-1 Horizontal timing(1) 70% Tphl 639 70% Last 70% data 640 PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 Negative High-z Tst High-z 70% Tphd 70% Tpsu 70% 70% High-z Even outputs Odd outputs Tpsu Tphd 70% POL LD DIO 1/2 (Input) LD CLK 70% 70% Last Thd 30% 70% Tlds Twld Fig. 11-2 Horizontal timing(2) 70% 30% 70% Tpsu Tphd 30% Positive PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 Fig. 11-3 Vertical shift clock timing OE TSUV CKV STVU/STVD 50% TOEV THDV TCKV 50% PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 Fig. 11-4 Vertical timing POL(Even Field) POL(Odd Field) STVU/STVD (VSY) (HSY) THP THDP PD035VX3 13. Power On Sequence The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PD035VX3 1) 10ms≦T1＜T2 VGG VDD2 VDD1,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 2) 0ms＜T3≦T4≦10ms 14. Optical Characteristics 14-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Response time Rise Fall Brightness Uniformity Symbol θ θ12(to 12 o’clock) θ11(to 6 o’clock) CR Tr Tf Condition U Cross Talk x y White Chromaticity LED Life Time Ta=25℃ CR＞10 θ=0° θ=0° θ=0° θ=0° MIN. ±45 TYP. MAX. ±50 Unit deg 10 15 - deg 30 35 - deg 200 180 70 0.28 0.30 - 400 15 25 210 75 0.31 0.33 10000 30 50 ms ms 3 0.34 0.36 - Ta=25℃ Remarks Note 14-2 Note 14-4 Note 14-3 cd/㎡ Note 14-1 % Note 14-5 % Note 14-6 hrs Note 14-1 All the optical measurement shall be executed 1 minute after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PD035VX3 Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field =1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 14-1: 1.Topcon BM-5A or BM-7 fast luminance meter 1° field of view is used in the testing (after 1 minute operation). Note 14-2: The definitions of viewing angles are as follow The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PD035VX3 Note 14-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Note 14-4: The definition of contrast ratio CR = Tf Luminance at gray level 63 Luminance at gray level 0 Note 14-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1 /6 2 /6 2 /6 1 /6 1 /6 2 /6 2 /6 1 /6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PD035VX3 ⏐YA-YB⏐ YA YA : Brightness of Pattern A YB : Brightness of Pattern B Pattern A Note 14-6 : Cross Talk (CTK) = ×100% Pattern B (Gray Level 31, central (Gray Level 31) black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Testing Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PD035VX3 15. Handling Cautions 15-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 15-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 15-3) Precautions about touch panel a) Input must be performed through a special designed stylus only. Do not pile up the products or put any heavy things on it. 15-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 16. Reliability Test The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PD035VX3 No 1 2 3 4 5 Test Item High Temperature Storage Test Low Temperature Storage Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 6 Vibration Test (non-operating) 7 Shock Test (non-operating) 8 Electrostatic Discharge Test (non-operating) 9 10 Hitting Durability Test ( Touch panel) Sliding Durability Test ( Touch panel) Test Condition Ta = +70℃, 240 hrs Ta = -20℃, 240 hrs Ta = 0℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs (No Condensation) -20℃Æ+70℃, 100 Cycles 30min 30min Frequency : 10 ~ 55 HZ Amplitude : 1.0 mm Sweep time : 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100G , 6ms Direction : ±X , ±Y , ±Z Cycle : 3 times 200pF, 0Ω ±200V 1 time / each terminal 1,000,000 times, with R 8.0 mm silicon rubber, 200g, 3times/sec 1,00,000 times, with R 0.8 mm polyacetal stylus, 200g, 60mm/sec Ta: ambient temperature Note : The protective film must be removed before temperature test. [Judgement Criteria] Under the display quality test conditions with normal operation state , there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 PD035VX3 17. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 PD035VX3 Revision History Rev. 0.1 Issued Date Apr. 12 , 2005 Revised Preliminary 1.0 July.15 , 2005 Release verson Contents Appendix The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 PD035VX3 VLED (Pin 04) 15 + 0.5V VLED (Pin 02) 15 + 0.5V 0.1μF 47μF 25V LED 0.1μF 47μF 25V LED 20K 5% 20K 5% VC1 GLED1 (Pin 01) VC2 VB2 VB1 1KVR 2SC2412 1KVR 20mA , 1V 0.1μF 20mA , 1V VE2 2K 5% 49.9 Ω,1% 1/16W 2SC2412 0.1μF VE1 2K 5% GLED2 (Pin 03) 49.9 Ω,1% 1/16W The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27