G2A THRU G2M GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts FEATURES ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Hermetically sealed package 2.0 Ampere operation at TA=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E D * DO-204AP 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. Forward Current - 2.0 Amperes 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS G2A G2B G2D G2G G2J G2K G2M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps 1.2 1.1 Volts Maximum instantaneous forward voltage at 2.0A VF Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=100°C IR(AV) 100.0 µA IR 1.0 100.0 µA trr 1.5 µs Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=150°C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range CJ 15.0 pF RΘJA 55.0 °C/W TJ, TSTG -65 to +175 °C NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length P.C.B mounted. 4/98 RATINGS AND CHARACTERISTIC CURVES G2A AND G2M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE 50 PEAK FORWARD SURGE CURRENT, AMPERES 2.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 1.5 1.0 CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 0.5 0 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125 150 175 40 30 20 10 0 AMBIENT TEMPERATURE, °C TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=150°C 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 0.01 0.2 0.6 0.8 1.0 1.2 1.4 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=75°C 0.1 TJ=25°C TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 10 REVERSE VOLTAGE, VOLTS 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 30 1 1 0.01 0.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1 TJ=125°C 100 100