Piggyback Shrink Boot Connector Adapters 635-005 Environmental Piggyback Boot Cable Feed-Through Composite For Easy and Reliable Environmental Sealing of Feed-Through Fittings How To Order Finish Sym (Table II) Product Series Boot Material Type (Table IV) 635 - 005 XB 01 - 2 - 5 Basic No. Dash Number (Table III) C Flats (2 Pls) Length in 1/8 Inch Increments, 5/8 Inch Minimum, Eg. 5 = .625 Inches K Thread (2 Pls) N After Unrestricted Shrinkage Ø E Ref. (2 Pls) Feed-Thru Body Material and Finish Feed-thru Body, Washer, Jam Nut: High temperature engineering thermoplastic (black)/ see Table II O-ring: Silicone/N.A. Shrink Boot: Elastomeric/N.A. Notes Assembly identified with Glenair's name and part number, space permitting. Glenair 600 series backshell assembly tools are recommended for assembly and installation. Dimensions in Inches (millimeters) are subject to change without notice. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 12 E-Mail: [email protected] Piggyback Shrink Boot Connector Adapters 635-005 Environmental Piggyback Boot Cable Feed-Through Composite Table III: Key Dimensions Dash No. ØA B C ØE D F M Min K Thread N Max 01 .300 (7.62) .670 (17.0) .950 (24.1) 1.50 (38.1) 1.05 (26.7) 1.18 (30.0) M12 X 1.5 .300 (7.62) .138 (3.51) 02 .400 (10.2) .870 (22.1) 1.14 (29.0) 2.16 (54.9) 1.33 (33.8) 1.18 (30.0) M16 X 1.5 .400 (10.2) .138 (3.51) 03 .550 (14.0) 1.06 (26.9) 1.34 (34.0) 2.64 (67.1) 1.54 (39.1) 1.50 (38.1) M20 X 1.5 .550 (14.0) .197 (5.00) 04 .760 (19.3) 1.18 (30.0) 1.50 (38.1) 3.15 (80.0) 1.68 (42.7) 2.17 (55.1) M24 X 1.5 .760 (19.3) .236 (6.00) 05 .950 (24.1) 1.48 (37.6) 1.89 (48.0) 3.90 (99.1) 2.15 (54.6) 3.15 (80.0) M30 X 1.5 .950 (24.1) .335 (8.51) 06 1.49 (37.8) 1.61 (40.9) 2.05 (52.1) 5.12 (130) 2.33 (59.2) 3.90 (99.1) M36 X 1.5 1.49 (37.8) .394 (10.0) 07 1.58 (40.1) 2.17 (55.1) 2.64 (67.1) 5.12 (130) 2.68 (68.1) 3.90 (99.1) M48 X 1.5 1.58 (40.1) .394 (10.0) Table II: Finish Sym XB Finish Description No Plating, Color Black F Length .125 (3.20) .200 (5.10) B Flats Hot Melt Adhesive M As Supplied ØA Max Jam Nut Feed-Thru Body Washer O-Ring Table IV: Boot Material Selection Guide Attribute Continuous Operating Temp. Resistence To Fuels, Oils Low Toxicity, Zero Halogen Type 1 High-Performance Semi-Rigid Elastomer -75° to +150° c Excellent No Type 2 Zero-Halogen Semi-Rigid Polyolefin -30° to +135° c Very Good Yes Type 3 General Purpose Flexible Polyolefin -55° to +135° c Good No Dimensions in Inches (millimeters) are subject to change without notice. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 13 E-Mail: [email protected]