MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier TO-220AB FEATURES ITO-220AB • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 2 3 1 1 MBR25xxCT PIN 1 PIN 2 PIN 3 CASE 2 • High frequency operation 3 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) MBRF25xxCT PIN 1 • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 2 PIN 3 • Complant to RoHS 2002/95/EC and in accordance to WEEE 2002/96/EC TO-263AB K TYPICAL APPLICATIONS 2 For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. 1 MBRB25xxCT PIN 1 PIN 2 K HEATSINK MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94 V-0 flammability rating PRIMARY CHARACTERISTICS IF(AV) 2 x 15 A VRRM 35 V to 60 V IFSM 150 A VF 0.73 V at 30 A, 0.65 V at 15 A TJ max. 150 °C Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 Working peak reverse voltage VRWM 35 45 50 60 Maximum DC blocking voltage VDC 35 45 50 60 Maximum average forward rectified current at TC = 130 °C 30 total device per diode V A IF(AV) 15 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM Peak repetitive reverse surge current per diode at tp = 2 μs, 1 kHz IRRM Peak non-repetitive reverse energy (8/20 μs waveform) per diode ERSM 25 mJ Electrostatic discharge capacitor voltage human body model: C = 100 pF, R = 1.5 kΩ VC 25 kV dV/dt 10 000 V/μs 150 A Voltage rate of change (rated VR) Document Number: 88675 Revision: 15-Jun-10 1.0 0.5 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNIT TJ - 65 to + 150 Storage temperature range TSTG - 65 to + 175 Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 Operating junction temperature range °C V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNIT TC = 25 °C IF = 15 A TC = 125 °C Maximum instantaneous forward voltage per diode VF (1) TC = 25 °C IF = 30 A TC = 25 °C 0.75 - 0.65 0.82 - 0.73 - 0.2 1.0 40 50 V TC = 125 °C Maximum instantaneous reverse current at blocking voltage per diode - IR (1) TC = 125 °C mA Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJC 1.5 4.5 1.5 °C/W Typical thermal resistance from junction to case per diode ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR2545CT-E3/45 1.85 45 50/tube Tube ITO-220AB MBRF2545CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB2545CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB2545CT-E3/81 1.35 81 800/reel Tape and reel TO-220AB MBR2545CT-E3/4W 1.85 4W 50/tube Tube TO-220AB MBR2545CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBRF2545CTHE3/45 (1) 1.99 45 50/tube Tube MBRB2545CTHE3/45 (1) 1.35 45 50/tube Tube MBRB2545CTHE3/81 (1) 1.35 81 800/reel Tape and reel TO-263AB TO-263AB Note AEC-Q101 qualified (1) www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88675 Revision: 15-Jun-10 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 100 Instantaneous Reverse Current (mA) Average Forward Current (A) Resistive or Inductive Load 24 18 12 6 0 100 50 TJ = 125 °C 1 TJ = 75 °C 0.1 0.01 TJ = 25 °C 0 150 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics Per Diode 10 000 150 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 8.3 ms Single Half Sine-Wave 125 Junction Capacitance (pF) Peak Forward Surge Current (A) 10 0.001 0 100 75 50 25 1000 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 100 0 10 1 0.1 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 100 TJ = 150 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 TJ = 25 °C 0.1 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode Document Number: 88675 Revision: 15-Jun-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 MBR(F,B)2535CT thru MBR(F,B)2560CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88675 Revision: 15-Jun-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1