VCUT07B1-HD1 www.vishay.com Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode in LLP1006-2L FEATURES • • • • • • • 2 1 21129 20855 MARKING (example only) • XY • • • 21121 Bar = pin 1marking X = date code Y = type code (see table below) Ultra compact LLP1006-2L package Low package profile < 0.4 mm 1-line ESD-protection Working range ± 7 V Low leakage current IR < 0.1 μA Low load capacitance CD = 14 pF ESD-protection acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge Soldering can be checked by standard vision inspection; no X-ray necessary Pin plating NiPdAu (e4) no whisker growth e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION DEVICE NAME ORDERING CODE VCUT07B1-HD1 VCUT07B1-HD1-G4-08 TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) 8000 MINIMUM ORDER QUANTITY 8000 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS VCUT07B1-HD1 LLP1006-2L U 0.72 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS PARAMETER Peak pulse current Peak pulse power ESD immunity Operating temperature Storage temperature TEST CONDITIONS SYMBOL VALUE UNIT acc. IEC 61000-4-5; tp = 8/20 μs; single shot Pin 1 to pin 2 acc. IEC 61000-4-5; tp = 8/20 μs; single shot Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature IPPM 4 A PPP 60 W ± 30 ± 30 - 40 to + 125 - 55 to + 150 kV kV °C °C VESD TJ Tstg ELECTRICAL CHARACTERISTICS (pin 1 to pin 2 or pin 2 to pin1) (Tamb = 25 °C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance Rev. 1.1, 31-May-12 TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 1 lines Max. reverse working voltage at IR = 0.1 μA at VRWM = 7 V at IR = 1 mA at IPP = 1 A at IPP = IPPM = 4 A at VR = 0 V; f = 1 MHz at VR = 2.5 V; f = 1 MHz VRWM VR IR VBR 7 7.3 - 9 14 11 7 0.1 12 15 16 - V V μA V V V pF pF VC CD Document Number: 84137 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT07B1-HD1 www.vishay.com Vishay Semiconductors CUT THE SPIKES WITH VCUT07B1-HD1: The VCUT07B1-HD1 is a bidirectional and symmetrical (BiSy) ESD-protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT07B1-HD1 offers a high isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package size of the tiny LLP1006-2L package the line inductance is very low, so that fast transients like an ESD-strike can be clamped with minimal over- or undershoots. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 16 120 % Rise time = 0.7 ns to 1 ns 14 Discharge Current IESD 100 % f = 1 MHz Pin 2 - 1 12 80 % CD (pF) 10 60 % 53 % 8 6 40 % 4 27 % 20 % 2 0 -8 0% - 10 0 10 20 30 40 50 60 70 80 90 100 -6 -4 -2 Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) 0 2 4 6 8 VR (V) 22630 Time (ns) 20557 Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR 10 8 8 µs to 100 % 100 % 6 80 % 4 VR (V) 2 IPPM 60 % 20 µs to 50 % 40 % 0 Pin 2 - 1 -2 -4 -6 20 % -8 0% 0 20548 10 20 30 40 Time (µs) Fig. 2 - 8/20 μs Peak Pulse Current Wave Form acc. IEC 61000-4-5 Rev. 1.1, 31-May-12 - 10 0.01 22631 0.1 1 10 100 1000 10 000 IR (µA) Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR Document Number: 84137 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT07B1-HD1 www.vishay.com Vishay Semiconductors 15 20 Measured acc. IEC 6100-4-5 (8/20 μs - wave form) 10 positive surge acc. IEC 61000-4-2 - 8 kV contact discharge Pin 2-1 10 0 - 10 0 Pin 2-1 VC-ESD (V) VC (V) 5 VC -5 - 20 - 30 - 40 - 50 - 10 negative surge - 60 - 15 - 70 0 1 2 3 4 5 IPP (A) 22632 Fig. 5 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP -10 0 10 20 30 40 50 60 70 80 90 Fig. 7 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) 60 70 60 t (ns) 22634 Pin 2-1 acc. IEC 61000-4-2 contact discharge acc. IEC 61000-4-2 + 8 kV contact discharge Pin 2-1 positive discharge 40 50 20 30 VC-ESD (V) VC-ESD (V) 40 2 20 10 0 0 VC-ESD 30 ns - 20 - 40 negative discharge - 10 - 20 - 10 0 22633 - 60 t (ns) Fig. 6 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) Rev. 1.1, 31-May-12 0 10 20 30 40 50 60 70 80 90 22635 5 10 15 20 25 VESD (kV) Fig. 8 - Typical Peak. Clamping Voltage at ESD Contact Discharge (acc. IEC 61000-4-2) Document Number: 84137 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT07B1-HD1 www.vishay.com Vishay Semiconductors 0.25 [0.010] 0.15 [0.006] PACKAGE DIMENSIONS in millimeters (Inches): LLP1006-2L 0.55 [0.022] 0.45 [0.018] 0.3 [0.012] 0.2 [0.008] 0.125 [0.005] Ref. 0.65 [0.026] 0.55 [0.022] 0.05 [0.002] 0 [0.000] 0.4 [0.016] 0.33 [0.013] 0.45 [0.018] 0.35 [0.014] Orientation Identification 1.05 [0.041] 0.95 [0.037] 1 [0.039] 0.2 [0.008] 0.5 [0.020] 0.6 [0.024] Foot print recommendation: solder resist mask solder pad Created - Date: 13. July. 2007 Rev. 5 - Date: 21 April 2010 Document no.:S8-V-3906.04-005 (4) 20812 Rev. 1.1, 31-May-12 0.05 [0.002] 0.25 [0.010] 0.5 [0.020] soldermask opening ± 0.03 measured middle of the package Document Number: 84137 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000