FDMC8588 N-Channel PowerTrench® MOSFET 25 V, 40 A, 5.7 mΩ Features General Description Max rDS(on) = 5.7 mΩ at VGS = 4.5 V, ID = 16.5 A This N-Channel MOSFET has been designed specifically to improve the overall efficiency and to minimize switch node ringing of DC/DC converters using either synchronous or conventional switching PWM controllers. It has been optimized for low gate charge, low rDS(on), fast switching speed and body diode reverse recovery performance. State-of-the-art switching performance Lower output capacitance, gate resistance, and gate charge boost efficiency Shielded gate technology reduces switch node ringing and increases immunity to EMI and cross conduction Applications RoHS Compliant High side switching for high end computing High power density DC-DC synchronous buck converter Bottom Top S D D D Pin 1 S S G D S D S D S D G D Power 33 MOSFET Maximum Ratings TA = 25 °C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter (Note 5) Ratings 25 Units V VGS Gate to Source Voltage (Note 4) ±12 V Drain Current - Continuous (Package limited) TC = 25 °C - Continuous (Silicon Limited) ID 40 TC = 25 °C - Continuous 59 (Note 1a) - Pulsed PD TJ, TSTG A 60 Single Pulse Avalanche Energy EAS 16.5 (Note 3) Power Dissipation TC = 25 °C Power Dissipation TA = 25 °C 29 26 (Note 1a) Operating and Storage Junction Temperature Range 2.4 -55 to +150 mJ W °C Thermal Characteristics RθJC Thermal Resistance, Junction to Case TC = 25 °C RθJA Thermal Resistance, Junction to Ambient TA = 25 °C 4.7 (Note 1a) 53 °C/W Package Marking and Ordering Information Device Marking 08OD Device FDMC8588 ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 Package Power 33 1 Reel Size 13 ’’ Tape Width 12 mm Quantity 3000 units www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET June 2012 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250 μA , VGS = 0 V ΔBVDSS ΔTJ Breakdown Voltage Temperature Coefficient 25 ID = 250 μA , referenced to 25 °C IDSS Zero Gate Voltage Drain Current VDS = 20 V, VGS = 0 V IGSS Gate to Source Leakage Current, Forward VGS = 12 V, VDS = 0 V V 17 mV/°C 1 μA 100 nA 1.8 V On Characteristics VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 μA ΔVGS(th) ΔTJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250 μA , referenced to 25 °C -4 VGS = 10 V, ID = 17 A 3.5 rDS(on) Static Drain to Source On Resistance VGS = 4.5 V, ID = 16.5 A 4.3 5.7 VGS = 10 V, ID = 17 A,TJ = 125 °C 4.8 6.9 VDD = 5 V, ID = 16.5 A 85 gFS Forward Transconductance 0.8 1.4 mV/°C 5.0 mΩ S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance VDS = 13 V, VGS = 0 V, f = 1 MHz 1228 pF 441 pF 69 pF 0.5 Ω 8 ns 3 ns Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg(TOT) Total Gate Charge at 4.5V Qgs Total Gate Charge Qgd Gate to Drain “Miller” Charge VDD = 13 V, ID = 16.5A, VGS = 10 V, RGEN = 6 Ω VDD = 13 V, ID = 16.5 A 25 ns 2 ns 12 nC 3.0 nC 3.3 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = 2 A (Note 2) 0.7 1.2 VGS = 0 V, IS = 16.5 A (Note 2) 0.8 1.2 IF = 16.5 A, di/dt = 100 A/μs V V 25 ns 10 nC Notes: 1. RθJA is determined with the device mounted on a 1in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RθJC is guaranteed by design while RθCA is determined by the user's board design. b. 125 °C/W when mounted on a minimum pad of 2 oz copper a. 53 °C/W when mounted on a 1 in2 pad of 2 oz copper SS SF DS DF G SS SF DS DF G 2. Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0%. 3. EAS of 29 mJ is based on starting TJ = 25 °C, L = 1.2 mH, IAS = 7 A, VDD = 23 V, VGS = 10V. 100% tested at L = 0.1 mH, IAS = 16 A. 4. As an N-ch device, the negative Vgs rating is for low duty cycle pulse occurrence only. No continuous rating is implied. 5. The continuous Vds rating is 25V; however, a pulse of 28 V peak voltage for no longer than 3ns duration at 500KHz frequency can be applied. ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 2 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25 °C unless otherwise noted 3.0 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 60 VGS = 10 V ID, DRAIN CURRENT (A) 50 VGS = 4.5 V VGS = 4 V 40 VGS = 3 V 30 VGS = 2.5 V 20 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 10 0 0.0 0.2 0.4 0.6 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 2.5 VGS = 2.5 V 2.0 VGS = 4 V 1.5 1.0 VGS = 4.5 V 0.5 0 10 Figure 1. On Region Characteristics rDS(on), DRAIN TO 0.8 SOURCE ON-RESISTANCE (mΩ) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 1.0 -50 60 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 15 ID = 16.5 A 10 TJ = 125 oC 5 TJ = 25 oC 0 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) 0 2 4 6 8 10 VGS, GATE TO SOURCE VOLTAGE (V) Figure 4. On-Resistance vs. Gate to Source Voltage Figure 3. Normalized On Resistance vs. Junction Temperature 60 IS, REVERSE DRAIN CURRENT (A) 60 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 50 ID, DRAIN CURRENT (A) 50 20 1.2 0.6 -75 40 Figure 2. Normalized On-Resistance vs. Drain Current and Gate Voltage ID = 16.5 A VGS = 10 V 1.4 30 VGS = 10 V ID, DRAIN CURRENT (A) VDS, DRAIN TO SOURCE VOLTAGE (V) 1.6 20 VGS = 3 V VDS = 5 V 40 TJ = 150 oC 30 TJ = 25 oC 20 TJ = -55 oC 10 0 0.5 1.0 1.5 2.0 2.5 TJ = 150 oC 10 TJ = 25 oC 1 TJ = -55 oC 0.1 0.0 3.0 VGS, GATE TO SOURCE VOLTAGE (V) 0.2 0.4 0.6 0.8 1.0 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 VGS = 0 V Figure 6. Source to Drain Diode Forward Voltage vs. Source Current 3 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25°C unless otherwise noted 3000 Ciss ID = 16.5 A 3.6 VDD = 10 V CAPACITANCE (pF) VGS, GATE TO SOURCE VOLTAGE (V) 4.5 VDD = 13 V 2.7 VDD = 15 V 1.8 1000 0.9 Coss Crss 100 f = 1 MHz VGS = 0 V 0.0 0 2 4 6 8 10 30 0.1 12 Figure 7. Gate Charge Characteristics 30 10 ID, DRAIN CURRENT (A) 70 TJ = 25 oC TJ = 100 oC TJ = 125 oC 60 VGS = 10 V 50 40 30 Limited by Package VGS = 4.5 V 20 R = 4.7 oC/W θJC 10 1 0.001 0.01 0.1 1 10 0 25 100 50 tAV, TIME IN AVALANCHE (ms) 125 150 Figure 10. Maximum Continuous Drain Current vs. Case Temperature P(PK), PEAK TRANSIENT POWER (W) 1000 100 μs 10 0.1 100 o 100 1 75 TC, CASE TEMPERATURE ( C) Figure 9. Unclamped Inductive Switching Capability ID, DRAIN CURRENT (A) 10 Figure 8. Capacitance vs. Drain to Source Voltage 50 IAS, AVALANCHE CURRENT (A) 1 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 1 ms THIS AREA IS LIMITED BY rDS(on) 10 ms 100 ms 1s SINGLE PULSE TJ = MAX RATED 10 s RθJA = 125 oC/W DC TA = 25 oC 0.01 0.01 0.1 1 10 100200 10 SINGLE PULSE RθJA = 125 oC/W 1 TA = 25 oC 0.5 -4 10 10 -3 -2 10 -1 10 0 10 1 10 100 1000 t, PULSE WIDTH (sec) VDS, DRAIN to SOURCE VOLTAGE (V) Figure 11. Forward Bias Safe Operating Area ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 100 Figure 12. Single Pulse Maximum Power Dissipation 4 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25°C unless otherwise noted 2 NORMALIZED THERMAL IMPEDANCE, ZθJA 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TA o RθJA = 125 C/W 1E-3 5E-4 -4 10 -3 10 -2 10 -1 0 10 10 1 10 100 1000 t, RECTANGULAR PULSE DURATION (sec) Figure 13. Junction-to-Ambient Transient Thermal Response Curve ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 5 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25°C unless otherwise noted 3.40 3.20 8 PKG C L 3.40 2.37 MIN A (0.45) 8 B 5 1 2.15 MIN 1.70 3.40 3.20 PKG C L KEEP OUT AREA SYM C L 5 0.70 MIN (0.40) (0.65) 4 1 SEE DETAIL A 4 0.65 0.42 MIN 1.95 LAND PATTERN RECOMMENDATION 0.10 C A B 0.37 0.27 1 PKG C L 1.95 0.65 4 0.50 0.30 (0.20) 2.09 (1.65) 1.89 (0.67) (0.39) 0.52 8 5 NOTES: UNLESS OTHERWISE SPECIFIED A) PACKAGE STANDARD REFERENCE: JEDEC MO-240, ISSUE A, VAR. BA, D ATED OCTOBER 2002. B) ALL D IMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS D O N OT IN CLUDE BUR RS OR MOLD FLASH. MOLD FLASH OR BURRS DOES NOT EXCEED 0.10MM. D) DIMENSIONING AN D TOLERANCING PER ASME Y14.5M-1994. E) IT IS RECOMMENDED TO HAVE NO TR ACES OR VIAS WITHIN THE KEEP OUT AREA. F) DRAWING FILE NAME: PQFN08BREV2 (2.27) 0.10 C 1.00 0.85 0.08 C 0.23 0.18 0.05 0.00 DETAIL A C SEATING PLANE SCALE: 2X ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 6 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET Dimensional Outline and Pad Layout tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I61 ©2012 Fairchild Semiconductor Corporation FDMC8588 Rev.D3 7 www.fairchildsemi.com FDMC8588 N-Channel PowerTrench® MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS™ 2Cool™ PowerTrench® The Power Franchise® ® FRFET® PowerXS™ AccuPower™ Global Power ResourceSM Programmable Active Droop™ AX-CAP™* Green Bridge™ QFET® BitSiC® TinyBoost™ Build it Now™ QS™ Green FPS™ TinyBuck™ CorePLUS™ Quiet Series™ Green FPS™ e-Series™ TinyCalc™ CorePOWER™ RapidConfigure™ Gmax™ TinyLogic® CROSSVOLT™ GTO™ ™ TINYOPTO™ CTL™ IntelliMAX™ TinyPower™ Saving our world, 1mW/W/kW at a time™ Current Transfer Logic™ ISOPLANAR™ TinyPWM™ DEUXPEED® Marking Small Speakers Sound Louder SignalWise™ TinyWire™ SmartMax™ Dual Cool™ and Better™ TranSiC® SMART START™ EcoSPARK® MegaBuck™ TriFault Detect™ EfficentMax™ Solutions for Your Success™ MICROCOUPLER™ TRUECURRENT®* ESBC™ SPM® MicroFET™ μSerDes™ STEALTH™ MicroPak™ ® SuperFET® MicroPak2™ ® SuperSOT™-3 MillerDrive™ Fairchild UHC® SuperSOT™-6 MotionMax™ Fairchild Semiconductor® Ultra FRFET™ SuperSOT™-8 Motion-SPM™ FACT Quiet Series™ UniFET™ SupreMOS® mWSaver™ FACT® VCX™ SyncFET™ OptoHiT™ FAST® VisualMax™ Sync-Lock™ OPTOLOGIC® FastvCore™ VoltagePlus™ OPTOPLANAR® ®* FETBench™ XS™ FlashWriter® * ® FPS™