TDK MMZ2012

Chip Beads
For signal line
MMZ series
Type:
MMZ0402
MMZ0603
MMZ1005
MMZ1608
MMZ2012
MMZ0603-E
MMZ1005-E
0402[01005 inch]*
0603[0201 inch]
1005[0402 inch]
1608[0603 inch]
2012[0805 inch]
0603[0201 inch]
1005[0402 inch]
* Dimensions Code JIS[EIA]
Issue date:
March 2013
• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(1/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ0402
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
0.2
0.15 to 0.2
SPECIFICATIONS
PRODUCT IDENTIFICATION
Operating temperature range
Storage temperature range
(7)
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
121:120 at 100MHz
(5) Characteristic type
(6) Packaging style
T: Taping
(7) TDK internal code
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
0.15 to 0.2
Weight: 0.08mg
APPLICATIONS
Removal of signal line noises of cellular phones, portable audio
players, various modules, etc.
MMZ 0402 S 121 C T
(1)
(2) (3) (4) (5) (6)
0.18 to 0.2
0.2±0.02
0.4±0.02
0.2±0.02
FEATURES
• It is super small size(L0.4W0.2T0.2mm).
• It prevents radiated noise from high-speed signal lines.
• Maintain impedance to high frequency band.
• Because it adopts silver in internal electrode, it is low DC
resistance.
• Because it is not generate of cross talk with closed magnetic circuit structural design, high density assembly is possible.
• It is a product conforming to RoHS directive.
0.08 to 0.14
Dimensions in mm
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
20000 pieces/reel
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
ELECTRICAL CHARACTERISTICS
Part No.
MMZ0402S100C
MMZ0402S700C
MMZ0402S121C
MMZ0402S151C

Impedance
( )[100MHz]
10±5
70±25%
120±25%
150±25%
DC resistance
( )max.
0.10
0.45
0.70
0.70
Rated current
(mA)max.
500
260
210
200
Test equipment: E4991A or equivalent
Test tool: 16197 or equivalent
Test temperature: 25±10°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(2/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES)
MMZ0402S SERIES
300
MMZ0402S151C
250
Impedance (Ω)
MMZ0402S121C
200
MMZ0402S700C
150 MMZ0402S100C
100
50
0
1
10
100
1000
Frequency (MHz)
10000
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0402S100C
MMZ0402S700C
MMZ0402S121C
160
20
250
Z
R
10
X
200
120
Z
100
80
R
60
40
5
Impedance (Ω)
15
Impedance (Ω)
Impedance (Ω)
140
X
Z
150
R
100
X
50
20
0
1
10
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
10000
MMZ0402S151C
300
Impedance (Ω)
250
Z
100
R
150
100
X
50
10
100
1000
Frequency (MHz)
10000
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
0.4max.
0.26±0.04
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.0±0.05
0.46±0.04
ø60min.
8.0±0.2
1.0
3.5±0.05
1
1.75±0.1
0
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(3/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ0603
APPLICATIONS
Removal of signal line noises of cellular phones, portable audio
players, various modules, DSCs, portable game machines, etc.
PRODUCT IDENTIFICATION
MMZ 0603 S 121 C T
(1)
(2) (3) (4) (5) (6)
(7)
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
121:120 at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
MATERIAL CHARACTERISTICS
S material: Standard type that features impedance characteristics
similar to those of a typical ferrite core.
For signal line applications in which the blocking region
is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz
region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high
frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our Dmaterial, namely its sharp impedance rise time, and its
impedance peak frequency has been shifted higher
into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range.
TYPICAL MATERIAL CHARACTERISTICS
2000
1800
D
1600
Impedance(Ω)
FEATURES
• This is a multilayered chip bead product with dimensions of
L0.6W0.3T0.3mm.
• The product is magnetically shielded, allowing high density
mounting.
• We refined the rules for internal conductor design to reduce
floating capacity between conductors, which in turn has
contributed to a dramatic improvement in high frequency
characteristics. We have also been able to expand and reinforce
the EMI suppression in the GHz range.
• It is a product conforming to RoHS directive.
Y
1400
1200
1000
S
800
F
600
400
200
0
10
100
Frequency(MHz)
1000
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(4/28)
ELECTRICAL CHARACTERISTICS
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
Part No.
MMZ0603S100C
MMZ0603S800C
MMZ0603S121C
MMZ0603S241C
MMZ0603S471C
MMZ0603S601C
MMZ0603S102H
MMZ0603Y750C
MMZ0603Y121C
MMZ0603Y241C
MMZ0603Y471C
MMZ0603Y601C
MMZ0603D330C
MMZ0603D470C
MMZ0603D560C
MMZ0603D800C
MMZ0603D121C
MMZ0603F100C
MMZ0603F220C
MMZ0603F330C
0.30
0.3±0.03
0.6±0.03
0.25
0.30
0.25
0.3±0.03
0.1min.
Weight: 0.3mg
Dimensions in mm
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
15000 pieces/reel

RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
DC resistance
()max.
0.09
0.30
0.45
0.57
1.30
1.45
1.25
0.35
0.39
0.80
1.40
1.50
0.70
0.70
0.95
1.25
1.40
0.50
1.00
1.30
Impedance
( )[100MHz]
10±5
80±25%
120±25%
240±25%
470±25%
600±25%
1000±25%
75±25%
120±25%
240±25%
470±25%
600±25%
33±25%
47±25%
56±25%
80±25%
120±25%
10±5
22±25%
33±25%
Rated current
(mA)max.
500
200
200
200
100
100
200
300
200
200
200
200
200
200
100
100
100
200
200
150
Test equipment: E4991A or equivalent
Test tool: 16197 or equivalent
Test temperature: 25±10°C
10s max.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
TYPICAL ELECTRICAL CHARACTERISTICS
Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES)
MMZ0603S SERIES
MMZ0603Y SERIES
MMZ0603S102H
1000
1000
MMZ0603Y601C
MMZ0603D121C
800 MMZ0603Y471C
600
400
MMZ0603D800C
800
Impedance (Ω)
Impedance (Ω)
MMZ0603S601C
1200 MMZ0603S471C
MMZ0603S241C
1000 MMZ0603S121C
MMZ0603S800C
800 MMZ0603S100C
Impedance (Ω)
1400
MMZ0603D SERIES
MMZ0603Y241C
600 MMZ0603Y121C
MMZ0603Y750C
400
MMZ0603D560C
MMZ0603D470C
600
MMZ0603D330C
400
200
200
200
0
1
10
100
1000
Frequency (MHz)
10000
0
0
1
10
100
1000
Frequency (MHz)
10000
1
10
100
1000
Frequency (MHz)
10000
MMZ0603F SERIES
1200
Impedance (Ω)
1000
MMZ0603F330C
800
MMZ0603F220C
600
MMZ0603F100C
400
200
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(5/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0603S100C
MMZ0603S800C
18
160
16
140
12
10
R
8
6
X
4
200
120
Z
100
R
80
60
40
Z
150
R
100
X
50
X
20
2
0
250
Impedance(Ω)
Z
Impedance(Ω)
Impedance(Ω)
14
MMZ0603S121C
1
10
100
1000
Frequency (MHz)
0
10000
MMZ0603S241C
1
10
100
1000
Frequency (MHz)
MMZ0603S471C
450
0
10000
1
10
100
1000
Frequency (MHz)
10000
MMZ0603S601C
1000
800
400
800
300
250
Z
R
200
150
X
100
600
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
350
Z
R
400
600
Z
R
400
200
X
200
X
50
1
10
100
1000
Frequency (MHz)
0
10000
MMZ0603S102H
1200
Impedance(Ω)
Z
800
R
600
X
200
1
10
100
1000
Frequency (MHz)
10000
MMZ0603Y241C
1
10
100
1000
Frequency (MHz)
10000
MMZ0603Y121C
250
200
Z
R
1
10
100
1000
Frequency (MHz)
Z
150
R
100
X
X
50
0
10000
1
10
100
1000
Frequency (MHz)
10000
MMZ0603Y601C
900
1000
800
500
800
700
Impedance(Ω)
Impedance(Ω)
200
180
160
140
120
100
80
60
40
20
0
0
10000
MMZ0603Y471C
600
400
Z
300
R
200
600
Z
500
R
400
300
X
200
X
100
0
100
1000
Frequency (MHz)
Impedance(Ω)
Impedance(Ω)
1000
0
10
MMZ0603Y750C
1400
400
1
Impedance(Ω)
0
600
Z
R
400
X
200
100
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(6/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0603D330C
MMZ0603D470C
Impedance(Ω)
300
Z
R
200
100
X
10
100
1000
Frequency (MHz)
10000
1000
900
800
700
600
500
400
300
200
100
0
900
800
600
Z
500
R
400
300
200
X
100
10
100
1000
Frequency (MHz)
10000
MMZ0603F220C
1200
600
1000
Impedance(Ω)
Impedance(Ω)
500
400
Z
300
200
R
10
R
300
200
100
100
1000
Frequency (MHz)
0
10000
X
1
10
100
1000
Frequency (MHz)
10000
MMZ0603F100C
300
250
Z
X
1
10
200
Z
150
100
X
50
R
100
1000
Frequency (MHz)
0
10000
R
1
10
100
1000
Frequency (MHz)
10000
X
10
100
1000
Frequency (MHz)
800
600
Z
400
200
100
1
1
Z
400
MMZ0603F330C
700
0
X
Impedance(Ω)
Impedance(Ω)
700
1
R
MMZ0603D121C
MMZ0603D800C
0
Z
500
0
10000
1
10
X
100
1000
Frequency (MHz)
PACKAGING STYLES
REEL DIMENSIONS
R
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
0.5max.
0.38±0.05
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.0±0.05
0.68±0.05
ø60min.
8.0±0.3
1.0
3.5±0.05
1
600
1.75±0.1
0
700
Impedance(Ω)
Impedance(Ω)
400
MMZ0603D560C
Impedance(Ω)
500
500
450
400
350
300
250
200
150
100
50
0
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(7/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ1005
FEATURES
• Size standardized for use by automatic assembly equipment.
No preferred orientation.
• Electroplated terminal electrodes accommodate reflow
soldering.
• High reliability due to an entirely monolithic structure.
• Closed magnetic circuit structure allows high-density installation
while preventing crosstalk between circuits.
• Low DC resistance structure of electrode prevents wasteful
electric power consumption.
• It is a product conforming to RoHS directive.
APPLICATIONS
Removal of signal line noises of cellular phones, PCs, note PCs,
TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game
machines, digital photo frames, car navigation system, PNDs, etc.
PRODUCT IDENTIFICATION
MMZ 1005 S 121 C T
(1)
(2) (3) (4) (5) (6)
(7)
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
121:120 at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By
equalizing R components and X components that
beads possess at a frequency of 5MHz, it is able to
suppress overshooting, undershooting and ringing of
fast digital signals.
S material: Standard type that features impedance characteristics
similar to those of a typical ferrite core.
For signal line applications in which the blocking region
is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz
region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high
frequencies. Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our Dmaterial, namely its sharp impedance rise time, and its
impedance peak frequency has been shifted higher
into range. The product offers excellent noise suppression from 600MHz to as high as in the GHz range.
TYPICAL MATERIAL CHARACTERISTICS
2000
D
1800
Impedance(Ω)
1600
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Y
1400
1200
1000
F
S
800
600
400
B
200
0
10
100
Frequency(MHz)
1000
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(8/28)
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
ELECTRICAL CHARCTERISTICS
Part No.
MMZ1005B800C
MMZ1005B121C
MMZ1005B601C
MMZ1005S800C
MMZ1005S121C
MMZ1005S241C
MMZ1005S601C
MMZ1005S102C
MMZ1005Y400C
MMZ1005Y800C
MMZ1005Y121C
MMZ1005Y241C
MMZ1005Y301C
MMZ1005Y471C
MMZ1005Y601C
MMZ1005Y102C
MMZ1005Y152C
MMZ1005D100C
MMZ1005D220C
MMZ1005D330C
MMZ1005D680C
MMZ1005D121C
MMZ1005D241C
MMZ1005F330C
MMZ1005F470C
MMZ1005F560C
0.5
0.5±0.05
1±0.05
0.5
0.4
0.5
0.5±0.05
0.1min.
Weight: 1mg
Dimensions in mm
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
10000 pieces/reel
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
Natural
cooling
230˚C

180˚C
Impedance
( )[100MHz]
80±25%
120±25%
600±25%
80±25%
120±25%
240±25%
600±25%
1000±25%
40±25%
80±25%
120±25%
240±25%
300±25%
470±25%
600±25%
1000±25%
1500±25%
10±5
22±25%
33±25%
68±25%
120±25%
240±25%
33±25%
47±25%
56±25%
DC resistance
()max.
0.19
0.25
0.85
0.12
0.22
0.28
0.52
0.75
0.10
0.17
0.18
0.26
0.38
0.47
0.54
0.70
1.00
0.10
0.17
0.24
0.38
0.60
0.90
0.50
0.60
0.70
Rated current
(mA)max.
450
400
200
500
500
400
300
200
550
450
400
300
250
250
250
200
100
500
400
400
400
350
200
200
100
100
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
Test temperature: 25±10°C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
TYPICAL ELECTRICAL CHARACTERISTICS
Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES)
MMZ1005B SERIES
MMZ1005S SERIES
800
MMZ1005S102C
1200 MMZ1005S601C
MMZ1005S241C
1000 MMZ1005S121C
MMZ1005S800C
400
300
200
0
10000
MMZ1005D SERIES
600
400
200
0
1
10
100
1000
Frequency (MHz)
10000
1
10
100
1000
Frequency (MHz)
10000
1200
MMZ1005D241C
2500
MMZ1005F560C
1000
2000
Impedance (Ω)
Impedance (Ω)
800
MMZ1005F SERIES
3000
MMZ1005D121C
MMZ1005D680C
1500
MMZ1005D330C
1000
MMZ1005D220C
MMZ1005D100C
500
0
1000
400
0
100
1000
Frequency (MHz)
1200
600
200
10
1400
800
100
MMZ1005Y152C
MMZ1005Y102C
MMZ1005Y601C
MMZ1005Y471C
MMZ1005Y301C
MMZ1005Y241C
MMZ1005Y121C
MMZ1005Y800C
MMZ1005Y400C
1600
Impedance (Ω)
600 MMZ1005B800C
500
Impedance (Ω)
Impedance (Ω)
MMZ1005B121C
1
1800
1400
MMZ1005B601C
700
MMZ1005Y SERIES
800
MMZ1005F470C
600
MMZ1005F330C
400
200
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(9/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1005B800C
MMZ1005B121C
100
Impedance(Ω)
Impedance(Ω)
Z
80
R
60
40
0
180
800
160
700
140
600
120
R
100
X
20
MMZ1005B601C
Impedance(Ω)
120
Z
80
60
10
100
1000
Frequency (MHz)
0
10000
MMZ1005S800C
1
10
100
1000
Frequency (MHz)
0
10000
MMZ1005S121C
160
80
R
60
1
10
100
1000
Frequency (MHz)
10000
Z
100
R
X
300
250
200
Z
R
150
100
X
50
100
1000
Frequency (MHz)
0
10000
MMZ1005S601C
1
10
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
10000
MMZ1005S102C
900
1400
800
1200
700
1000
Impedance(Ω)
600
R
500
Z
400
300
200
600
400
200
0
1
10
100
1000
Frequency (MHz)
10000
MMZ1005Y400C
160
70
140
Impedance(Ω)
60
Z
R
40
30
20
10
10
10000
100
1000
Frequency (MHz)
MMZ1005Y121C
250
200
120
100
Z
80
R
60
10000
0
1
10
100
1000
Frequency (MHz)
Z
150
R
100
X
50
X
20
1
100
1000
Frequency (MHz)
40
X
10
1
MMZ1005Y800C
80
50
R
X
X
100
Z
800
Impedance(Ω)
Impedance(Ω)
150
50
X
20
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
Z
40
Impedance(Ω)
10
350
200
100
0
1
400
250
120
0
X
MMZ1005S241C
140
0
R
300
100
20
1
Z
400
200
X
40
500
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(10/28)
600
400
500
Z
300
R
200
800
700
400
Z
300
R
200
1
10
100
1000
Frequency (MHz)
0
10000
1
1200
10
100
1000
Frequency (MHz)
300
0
10000
X
1
10
100
1000
Frequency (MHz)
10000
MMZ1005Y152C
1800
1600
1400
800
Z
600
R
400
Z
800
600
400
X
10
100
1000
Frequency (MHz)
0
10000
MMZ1005D100C
1
10
100
1000
Frequency (MHz)
1
10
100
1000
Frequency (MHz)
10000
300
250
X
20
150
Z
Impedance(Ω)
Impedance(Ω)
R
30
X
MMZ1005D330C
Z
50
40
600
0
10000
200
60
800
200
MMZ1005D220C
70
R
400
200
1
Z
1200
R
1000
X
200
Impedance(Ω)
1000
Impedance(Ω)
Impedance(Ω)
1000
Impedance(Ω)
R
200
MMZ1005Y102C
1400
0
Z
400
100
1200
R
100
X
50
200
Z
150
R
100
X
50
10
10
100
1000
Frequency (MHz)
0
10000
1
100
1000
Frequency (MHz)
500
800
Impedance(Ω)
1000
400
Z
R
300
200
10
100
1000
Frequency (MHz)
100
1000
Frequency (MHz)
10000
2500
Z
2000
R
600
Z
R
1500
400
1000
500
X
10000
10
3000
X
1
1
MMZ1005D241C
200
100
0
10000
MMZ1005D121C
600
0
10
Z, X, R (Ω)
1
MMZ1005D680C
Impedance(Ω)
500
100
MMZ1005Y601C
0
600
X
X
100
0
MMZ1005Y471C
Impedance(Ω)
500
Impedance(Ω)
Impedance(Ω)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1005Y241C
MMZ1005Y301C
0
1
10
100
1000
Frequency (MHz)
10000
0
1
10
X
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(11/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1005F330C
MMZ1005F470C
1000
900
800
700
600
500
400
300
200
100
500
Z
300
200
100
R
1
0
10000
Z
R
800
600
Z
400
R
200
1
X
10
100
1000
Frequency (MHz)
PACKAGING STYLES
REEL DIMENSIONS
0
10000
X
10
100
1000
Frequency (MHz)
1
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
0.8max.
0.65±0.1
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.0±0.05
1.15±0.1
ø60min.
8.0±0.3
1.0
3.5±0.05
0
X
10
100
1000
Frequency (MHz)
1000
1.75±0.1
400
1200
Impedance(Ω)
Impedance(Ω)
600
Impedance(Ω)
700
MMZ1005F560C
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(12/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ1608
APPLICATIONS
Removal of signal line noises of cellular phones, PCs, note PCs,
TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game
machines, digital photo frames, car navigation system, PNDs, etc.
PRODUCT IDENTIFICATION
MMZ 1608 R 121 A T
(1)
(2) (3) (4) (5) (6)
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
0.8
0.8±0.15
1.6±0.15
0.6
0.3±0.2
0.8
0.6
Thickness(T)
0.6±0.15mm
0.8±0.15mm
T
FEATURES
• Chip bead(impeder), MMZ series offers 8 construction materials.
• Size standardized for use by automatic assembly equipment.
No preferred orientation.
• Either flow or reflow soldering methods can be used due to
electroplating of the terminal electrodes.
• High reliability due to an entirely monolithic structure.
• Closed magnetic circuit structure allows high-density installation
while preventing crosstalk between circuits.
• Low DC resistance structure of electrode prevents wasteful
electric power consumption.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
Weight
3mg
4mg
Dimensions in mm
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
4000 pieces/reel
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
(7)
250 to 260˚C
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
121:120 at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(13/28)
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals.
By equalizing R components and X components that
beads possess at a frequency of 5MHz, it is able to
suppress overshooting, undershooting and ringing of
fast digital signals.
R material: For wide frequency applications calling for broad
impedance characteristics.
For digital signal line applications calling requiring
good waveform integrity. Impedance values selected
for effectiveness at 10 to 200MHz.
S material: Standard type that features impedance characteristics
similar to those of a typical ferrite core.
For signal line applications in which the blocking region
is near 100MHz. Impedance values selected for
effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz
region and above.
For signal line applications in which the signal
frequency is far from the cutoff frequency. Impedance
values selected for effectiveness at 80 to 400MHz.
A material: This high-impedance product is based on the
impedance frequency characteristics of our Y-material.
The product offers excellent impedance
characteristics, which is greater than 2500, in the
vicinity of 100MHz range (MMZ1608A252B).
Q material: For high-band applications designed for 100MHz and
above. Impedance values selected for effectiveness at
100 to 800MHz.
D material: For applications calling for low insertion loss at low
frequencies and sharply increasing impedance at high
frequencies. Designed for high impedance at high
frequencies (300MHz to 1GHz) for signal line
applications.
F material: This new product inherits the characteristic of our
D-material, namely its sharp impedance rise time, and
its impedance peak frequency has been shifted higher
into range.
The product offers excellent noise suppression from
600MHz to as high as in the GHz range.
TYPICAL MATERIAL CHARACTERISTICS
2500
A
Impedance(Ω)
2000
D
F
Y
Q
1500
1000
R
500
S
B
Part No.
MMZ1608B121C
MMZ1608B221C
MMZ1608B301C
MMZ1608B471C
MMZ1608B601C
MMZ1608B102C
MMZ1608R150A
MMZ1608R300A
MMZ1608R600A
MMZ1608R121A
MMZ1608R301A
MMZ1608R471A
MMZ1608R601A
MMZ1608R102A
MMZ1608S400A
MMZ1608S800A
MMZ1608S121A
MMZ1608S181A
MMZ1608S221A
MMZ1608S301A
MMZ1608S471A
MMZ1608S601A
MMZ1608S102A
MMZ1608S202A
MMZ1608Y150B
MMZ1608Y300B
MMZ1608Y600B
MMZ1608Y121B
MMZ1608Y221B
MMZ1608Y301B
MMZ1608Y471B
MMZ1608Y601B
MMZ1608Y751B
MMZ1608Y102B
MMZ1608Y152B
MMZ1608A182B
MMZ1608A222B
MMZ1608A252B
MMZ1608Q121B
MMZ1608Q221B
MMZ1608Q331B
MMZ1608Q471B
MMZ1608Q601B
MMZ1608Q102B
MMZ1608D050C
MMZ1608D100C
MMZ1608D220C
MMZ1608D500C
MMZ1608D800C
MMZ1608D800B
MMZ1608D121C
MMZ1608D121B
MMZ1608D241C
MMZ1608D301B
MMZ1608F030B
MMZ1608F470B
MMZ1608F750B
MMZ1608F121B

0
10
ELECTRICAL CHARACTERISTICS
100
Frequency(MHz)
1000
Impedance
()
[100MHz]
120±25%
220±25%
300±25%
470±25%
600±25%
1000±25%
15±25%
30±25%
60±25%
120±25%
300±25%
470±25%
600±25%
1000±25%
40±25%
80±25%
120±25%
180±25%
220±25%
300±25%
470±25%
600±25%
1000±25%
2000±25%
15±25%
30±25%
60±25%
120±25%
220±25%
300±25%
470±25%
600±25%
750±25%
1000±25%
1500±25%
1800±25%
2200±25%
2500±25%
120±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
5±2
10±5
22±25%
50±25%
80±25%
80±25%
120±25%
120±25%
240±25%
300±25%
3typ.
47±25%
75±25%
120±25%
Rated
DC resistance
current
()max.
(mA)max.
0.15
600
0.25
500
0.25
500
0.30
500
0.40
500
0.60
300
0.05
1500
0.05
1500
0.10
800
0.18
500
0.25
500
0.30
500
0.40
500
0.50
400
0.10
600
0.15
500
0.15
500
0.20
500
0.20
500
0.30
500
0.30
500
0.35
500
0.50
400
0.90
200
0.05
1500
0.05
1500
0.15
500
0.20
500
0.30
500
0.30
500
0.35
500
0.40
500
0.45
500
0.50
400
0.60
300
0.80
200
0.80
200
0.80
200
0.30
500
0.40
500
0.50
400
0.70
300
0.80
200
1.00
200
0.05
700
0.10
500
0.20
500
0.25
500
0.30
500
0.30
500
0.30
400
0.30
400
0.60
300
0.70
300
0.05
700
0.40
500
0.55
300
0.75
200
Product’s
thickness
T(mm)
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
Test temperature: 25±10°C
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(14/28)
MMZ1608B301C
160
300
350
140
250
300
Z
100
R
80
60
250
Impedance(Ω)
120
Impedance(Ω)
Impedance(Ω)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1608B121C
MMZ1608B221C
200
Z
150
R
100
20
0
50
1
10
100
1000
Frequency (MHz)
MMZ1608B471C
100
100
1000
Frequency (MHz)
0
10000
500
600
1000
400
Z
300
R
200
Z
400
R
300
10
100
1000
Frequency (MHz)
200
0
10000
1
10
R
R
100
1000
Frequency (MHz)
10
5
0
10000
90
35
80
30
70
Z
R
20
15
10
X
1
10
100
1000
Frequency (MHz)
10000
MMZ1608R121A
50
Z
30
X
1
10
100
1000
Frequency (MHz)
0
10000
1
500
250
40
Z
R
150
100
X
X
20
0
Impedance(Ω)
300
100
Impedance(Ω)
120
200
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
100
1000
Frequency (MHz)
400
Z
300
R
200
X
100
50
1
10
MMZ1608R471A
600
60
R
40
350
R
10000
10
MMZ1608R301A
Z
100
1000
Frequency (MHz)
60
140
80
10
20
X
5
0
X
MMZ1608R600A
40
25
Z
400
Impedance(Ω)
Z
Impedance(Ω)
15
10000
200
MMZ1608R300A
20
100
1000
Frequency (MHz)
600
X
X
10
800
100
MMZ1608R150A
0
Impedance(Ω)
1200
500
1
MMZ1608B102C
700
0
Impedance(Ω)
10
MMZ1608B601C
100
Impedance(Ω)
1
X
50
X
600
Impedance(Ω)
Impedance(Ω)
0
10000
R
150
40
X
Z
200
10000
0
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(15/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1608R601A
MMZ1608R102A
600
Z
400
R
300
200
1200
60
1000
50
Impedance(Ω)
1
10
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
0
10000
60
40
X
10
100
1000
Frequency (MHz)
120
R
100
Z
80
60
0
10000
MMZ1608S221A
X
10
100
1000
Frequency (MHz)
150
100
250
Z
200
R
150
X
100
10
100
1000
Frequency (MHz)
0
10000
MMZ1608S601A
1
10
100
1000
Frequency (MHz)
Z
R
200
X
1
3000
600
1200
2500
1000
Impedance(Ω)
R
300
200
0
1
10
100
1000
Frequency (MHz)
R
600
400
X
X
100
Z
800
0
1
10
100
1000
Frequency (MHz)
10000
100
1000
Frequency (MHz)
2000
Z
1500
10000
R
1000
X
500
200
10000
10
MMZ1608S202A
1400
400
10000
300
700
Z
100
1000
Frequency (MHz)
400
0
10000
MMZ1608S102A
500
10
100
X
50
1
X
500
300
50
100
R
600
Impedance(Ω)
Impedance(Ω)
R
Z
150
MMZ1608S471A
350
Z
200
0
10000
400
200
0
1
450
250
10000
50
MMZ1608S301A
300
100
1000
Frequency (MHz)
250
20
1
10
300
40
20
1
MMZ1608S181A
Impedance(Ω)
Impedance(Ω)
R
X
10
140
Z
Impedance(Ω)
20
160
80
R
30
180
100
Impedance(Ω)
X
MMZ1608S121A
120
Impedance(Ω)
R
400
Z
40
200
MMZ1608S800A
0
Z
600
X
100
0
800
Impedance(Ω)
Impedance(Ω)
500
MMZ1608S400A
Impedance(Ω)
700
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(16/28)
MMZ1608Y600B
60
120
20
50
100
Z
15
R
10
Z
30
R
20
X
5
0
40
Impedance(Ω)
25
Impedance(Ω)
Impedance(Ω)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1608Y150B
MMZ1608Y300B
10
100
1000
Frequency (MHz)
0
10000
MMZ1608Y121B
Z
60
1
10
100
1000
Frequency (MHz)
0
10000
R
100
250
200
R
150
1
10
100
1000
Frequency (MHz)
X
0
10000
MMZ1608Y471B
1
10
100
1000
Frequency (MHz)
R
X
1
10
100
1000
Frequency (MHz)
10000
1000
800
800
Impedance(Ω)
500
R
400
Z
300
200
X
600
Z
500
R
400
300
X
200
100
Impedance(Ω)
700
Impedance(Ω)
Z
200
MMZ1608Y751B
900
600
0
300
0
10000
MMZ1608Y601B
700
10000
400
100
50
X
0
Z
100
50
100
1000
Frequency (MHz)
500
300
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
Z
10
600
350
150
1
MMZ1608Y301B
400
200
X
20
MMZ1608Y221B
250
R
40
X
10
1
80
Z
600
R
400
X
200
100
1
10
100
1000
Frequency (MHz)
0
10000
MMZ1608Y102B
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
MMZ1608Y152B
1400
1800
1200
1600
1400
Impedance(Ω)
Impedance(Ω)
1000
1200
Z
800
600
400
0
R
800
600
400
X
200
Z
1000
R
X
200
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(17/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1608A182B
MMZ1608A222B
MMZ1608A252B
3000
2500
2000
R
2000
Z R
1500
1000
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
2500
2000
Z
1500
1500
1000
X
500
Z
1000
X
500
X
500
R
1
10
100
1000
Frequency (MHz)
350
600
300
500
250
Z
R
200
150
100
1
10
100
1000
Frequency (MHz)
100
1000
Frequency (MHz)
Z
R
1
10
100
1000
Frequency (MHz)
R
500
400
300
X
10
100
1000
Frequency (MHz)
10000
MMZ1608Q102B
2000
1200
Impedance(Ω)
Impedance(Ω)
1000
800
R
600
400
200
10
100
1000
Frequency (MHz)
0
Impedance(Ω)
20
Z
R
X
10
5
100
1000
Frequency (MHz)
10000
1500
Z
R
1000
500
X
X
0
1
10
100
1000
Frequency (MHz)
10000
MMZ1608D100C
25
10
400
10000
30
15
600
80
160
70
140
60
120
50
Z
40
R
30
X
10000
20
100
1000
Frequency (MHz)
10000
Z
R
60
40
10
100
1000
Frequency (MHz)
80
10
1
10
100
20
0
1
MMZ1608D220C
Impedance(Ω)
1
Z R
800
200
X
MMZ1608D050C
1
Z
600
0
1
10000
Z
0
10000
100
1400
1000
0
100
1000
Frequency (MHz)
200
X
MMZ1608Q601B
1200
10
700
200
10000
1
800
300
0
0
10000
MMZ1608Q331B
100
MMZ1608Q471B
Impedance(Ω)
10
400
X
50
0
1
MMZ1608Q221B
Impedance(Ω)
Impedance(Ω)
MMZ1608Q121B
Impedance(Ω)
0
10000
Impedance(Ω)
0
0
X
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(18/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1608D500C
MMZ1608D800C
R
200
X
100
1
10
100
1000
Frequency (MHz)
400
Z
R
300
200
X
0
1
700
700
600
600
Impedance(Ω)
800
R
400
300
200
0
100
1000
Frequency (MHz)
10000
MMZ1608D301B
R
X
10000
800
Z
R
600
400
200
X
1
10
100
1000
Frequency (MHz)
0
10000
Impedance(Ω)
Impedance(Ω)
2000
1500
1000
R
R
20
X
15
10
600
500
400
300
Z
MMZ1608F750B
100
0
1
10000
10000
700
25
5
X
100
1000
Frequency (MHz)
800
Z
200
500
100
1000
Frequency (MHz)
10
900
30
2500
1
MMZ1608F470B
35
10
100
1000
Frequency (MHz)
1000
Z
MMZ1608F030B
3000
1
10
1200
300
0
Z
1
MMZ1608D241C
400
100
0
10000
X
200
X
10
100
1000
Frequency (MHz)
500
100
1
10
Z
200
0
MMZ1608D121B
Z
R
300
100
800
500
400
100
10000
MMZ1608D121C
Impedance(Ω)
500
Impedance(Ω)
0
500
Impedance(Ω)
Z
600
Impedance(Ω)
Impedance(Ω)
300
Impedance(Ω)
400
MMZ1608D800B
600
10
100
1000
Frequency (MHz)
10000
0
R
1
10
X
100
1000
Frequency (MHz)
10000
MMZ1608F121B
6000
2000
5000
Impedance(Ω)
Impedance(Ω)
1500
1000
4000
3000
2000
500
R
1000
Z
Z
R
0
1
X
10
100
1000
Frequency (MHz)
10000
0
1
10
X
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(19/28)
PACKAGING STYLES
REEL DIMENSIONS
1.5 +0.1
–0.0
Cavity
1.1max.
1.1±0.2
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
1.9±0.2
ø60min.
8.0±0.3
1.0
3.5±0.05
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(20/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ2012
FEATURES
• Chip bead(impeder), MMZ series offers 4 construction materials.
• Size standardized for use by automatic assembly equipment.
No preferred orientation.
• Either flow or reflow soldering methods can be used due to
electroplating of the terminal electrodes.
• High reliability due to an entirely monolithic structure.
• Closed magnetic circuit structure allows high-density installation
while preventing crosstalk between circuits.
• Low DC resistance structure of electrode prevents wasteful
electric power consumption.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
Removal of signal line noises of cellular phones, PCs, note PCs,
TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game
machines, digital photo frames, car navigation system, PNDs, etc.
MATERIAL CHARACTERISTICS
R material: For wide frequency applications calling for broad
impedance characteristics.
For digital signal line applications calling requiring
good waveform integrity. Impedance values selected
for effectiveness at 10 to 200MHz.
S material: Standard type that features impedance characteristics
similar to those of a typical ferrite core.
For signal line applications in which the blocking region
is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz
region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high
frequencies. Designed for high impedance at high frequencies (200 to 500MHz) for signal line applications.
PRODUCT IDENTIFICATION
TYPICAL MATERIAL CHARACTERISTICS
(7)
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
121:120 at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
2500
2000
Impedance(Ω)
MMZ 2012 R 121 A T
(1)
(2) (3) (4) (5) (6)
Y
1500
1000
500
0
10
D
S
R
100
Frequency(MHz)
1000
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(21/28)
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
ELECTRICAL CHARACTERISTICS
Part No.
MMZ2012R150A
MMZ2012R300A
MMZ2012R600A
MMZ2012R121A
MMZ2012R301A
MMZ2012R601A
MMZ2012R102A
MMZ2012S400A
MMZ2012S800A
MMZ2012S121A
MMZ2012S181A
MMZ2012S301A
MMZ2012S601A
MMZ2012S102A
MMZ2012Y150B
MMZ2012Y300B
MMZ2012Y600B
MMZ2012Y121B
MMZ2012Y301B
MMZ2012Y601B
MMZ2012Y102B
MMZ2012Y152B
MMZ2012Y202B
MMZ2012D800B
MMZ2012D121B
MMZ2012D301B
1.2
1.25±0.2
2±0.2
0.8
0.8
1
0.85±0.2
0.5±0.3
Weight: 8mg
Dimensions in mm
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
4000 pieces/reel
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
Natural
cooling
230˚C

180˚C
Impedance
()[100MHz]
15±25%
30±25%
60±25%
120±25%
300±25%
600±25%
1000±25%
40±25%
80±25%
120±25%
180±25%
300±25%
600±25%
1000±25%
15±25%
30±25%
60±25%
120±25%
300±25%
600±25%
1000±25%
1500±25%
2000±25%
80±25%
120±25%
300±25%
DC resistance
()max.
0.05
0.05
0.10
0.12
0.15
0.20
0.30
0.10
0.10
0.15
0.15
0.20
0.30
0.35
0.05
0.05
0.10
0.12
0.15
0.20
0.30
0.40
0.50
0.30
0.30
0.50
Rated current
(mA)max.
1500
1500
1000
800
600
500
500
1000
800
800
600
600
500
500
1500
1500
1000
800
600
500
500
500
400
500
500
400
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
Test temperature: 25±10°C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ2012R150A
MMZ2012R300A
15
Z
Impedance(Ω)
Impedance(Ω)
20
R
10
X
5
40
90
35
80
30
70
25
Impedance(Ω)
25
MMZ2012R600A
Z
20
R
15
10
10
100
1000
Frequency (MHz)
0
1
10000
MMZ2012R121A
50
30
10
100
1000
Frequency (MHz)
0
1
10000
350
700
120
300
600
R
60
40
X
Z
200
R
150
100
50
20
0
1
250
10
100
1000
Frequency (MHz)
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
Z
10000
0
1
100
1000
Frequency (MHz)
10000
100
1000
Frequency (MHz)
500
Z
400
R
300
200
100
X
10
10
MMZ2012R601A
140
80
X
10
MMZ2012R301A
100
R
Z
40
20
X
5
0
1
60
10000
0
1
X
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(22/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ2012R102A
MMZ2012S400A
MMZ2012S800A
1000
50
120
800
Z
R
600
400
200
100
1000
Frequency (MHz)
100
1000
Frequency (MHz)
Impedance(Ω)
100
Z
80
R
60
X
40
100
1000
Frequency (MHz)
MMZ2012S601A
R
150
Z
100
250
100
0
1
10
100
1000
Frequency (MHz)
0
1
10000
10
Impedance(Ω)
100
1000
Frequency (MHz)
Z
MMZ2012Y300B
400
100
Impedance(Ω)
40
Z
R
20
R
10
X
100
1000
Frequency (MHz)
0
1
10000
10
100
1000
Frequency (MHz)
10000
MMZ2012Y121B
200
80
Z
60
R
40
X
X
10
Z
5
MMZ2012Y600B
120
0
1
10
10000
15
X
0
1
50
30
R
600
10000
100
1000
Frequency (MHz)
20
Impedance(Ω)
0
1
800
200
100
Impedance(Ω)
25
X
10
MMZ2012Y150B
1000
200
X
50
600
300
R
150
30
Z
Z
200
1200
400
10000
300
700
R
100
1000
Frequency (MHz)
350
MMZ2012S102A
500
10
400
200
10000
X
450
50
10
40
MMZ2012S301A
X
20
Z
60
0
1
250
120
R
80
10000
300
140
Impedance(Ω)
10
100
20
X
MMZ2012S181A
160
Impedance(Ω)
20
0
1
180
Impedance(Ω)
R
10000
MMZ2012S121A
0
1
Z
30
10
X
10
40
Impedance(Ω)
0
1
Impedance(Ω)
140
Impedance(Ω)
60
Impedance(Ω)
1200
150
Z
R
100
X
50
20
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(23/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ2012Y301B
MMZ2012Y601B
600
R
300
Z
200
Z
500
R
400
300
200
X
100
Impedance(Ω)
400
1000
600
Impedance(Ω)
X
100
1000
Frequency (MHz)
0
10000
MMZ2012Y152B
1
10
100
1000
Frequency (MHz)
600
X
400
R
1500
Z
1000
X
500
10
100
1000
Frequency (MHz)
0
1
10000
MMZ2012D121B
300
200
Z
10
100
1000
Frequency (MHz)
R
0
1
10000
10
X
100
1000
Frequency (MHz)
10000
4500
4000
1000
3500
Impedance(Ω)
800
600
400
Z
10
2500
2000
1500
1000
200
R
3000
100
1000
Frequency (MHz)
R
Z
500
X
0
1
10000
X
10
PACKAGING STYLES
REEL DIMENSIONS
100
1000
Frequency (MHz)
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
1.1max.
1.5±0.2
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.3±0.2
ø60min.
8.0±0.3
1.0
3.5±0.05
Impedance(Ω)
400
MMZ2012D301B
1200
0
1
500
100
200
0
1
10000
600
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
R
Z
800
100
1000
Frequency (MHz)
700
2000
1000
10
MMZ2012D800B
2500
1200
X
0
1
1600
1400
R
400
10000
MMZ2012Y202B
1800
Z
600
200
100
10
800
1.75±0.1
Impedance(Ω)
1200
700
500
0
1
MMZ2012Y102B
800
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(24/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ0603-E
APPLICATIONS
Removal of signal line noises of cellular phones, portable audio
players, various modules, DSCs, portable game machines, etc.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
0.30
0.3±0.03
0.6±0.03
0.25
0.1min.
0.3±0.03
FEATURES
• This is a multilayered chip bead product with dimensions of
L0.6W0.3T0.3mm.
• Compared with the existing MMZ0603 type, this new product
has broad-band impedance values for higher frequency ranges.
• The product is magnetically shielded, allowing high density
mounting.
• We refined the rules for internal conductor design to reduce
floating capacity between conductors, which in turn has
contributed to a dramatic improvement in high frequency
characteristics. We have also been able to expand and reinforce
the EMI suppression in the GHz range.
• It is a product conforming to RoHS directive.
0.30
0.25
Weight: 0.3mg
Dimensions in mm
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
15000 pieces/reel
PRODUCT IDENTIFICATION
MMZ 0603 S 102 E T
(1)
(2) (3) (4) (5) (6)
(7)
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
102:1000 at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
10s max.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
ELECTRICAL CHARACTERISTICS
Part No.
MMZ0603S601E
MMZ0603S102E

Impedance( )
[100MHz] [1GHz]
600±25% 1000±40%
1000±25% 1800±40%
DC resistance
( )max.
1.60
2.60
Rated current
(mA)max.
150
125
Test equipment: E4991A or equivalent
Test tool: 16197 or equivalent
Test temperature: 25±10°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(25/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES)
MMZ0603S-E SERIES
MMZ0603S102E
Impedance (Ω)
2000
1800
1600
1400
1200
1000
800
600
400
200
0
MMZ0603S601E
1
100
Frequency (MHz)
1000
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ0603S601E
MMZ0603S102E
1200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
Z
R
400
X
200
0
1
10
100
1000
Frequency (MHz)
10000
R
X
1
10
100
1000
Frequency (MHz)
PACKAGING STYLES
REEL DIMENSIONS
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
0.5max.
0.38±0.05
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.0±0.05
0.68±0.05
ø60min.
8.0±0.3
1.0
3.5±0.05
600
Z
1.75±0.1
800
Impedance(Ω)
Impedance(Ω)
1000
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(26/28)
Chip Beads
For Signal Line
Conformity to RoHS Directive
MMZ Series MMZ1005-E
FEATURES
• Compared with the existing MMZ1005 type, this new product
has broad-band impedance values for higher frequency ranges.
• Size standardized for use by automatic assembly equipment.
No preferred orientation.
• Electroplated terminal electrodes accommodate reflow
soldering.
• High reliability due to an entirely monolithic structure.
• Closed magnetic circuit structure allows high-density installation
while preventing crosstalk between circuits.
• Low DC resistance structure of electrode prevents wasteful
electric power consumption.
• It is a product conforming to RoHS directive.
APPLICATIONS
Removal of signal line noises of cellular phones, PCs, note PCs,
TVs, TV tuners, STBs, audio players, DVDs, DSCs, DVCs, game
machines, digital photo frames, car navigation system, PNDs, etc.
PRODUCT IDENTIFICATION
MMZ 1005 S 601 E T
(1)
(2) (3) (4) (5) (6)
(7)
(1) Series name
(2) Dimensions LW
(3) Type name
(4) Impedance
601:600  at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
(7) TDK internal code
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
10000 pieces/reel
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C(After mount)
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
0.5
0.5±0.05
1±0.05
0.5
0.4
0.5
0.5±0.05
0.1min.
Weight: 1mg
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
ELECTRICAL CHARACTERISTICS
Impedance( )
Part No.
MMZ1005S601E
MMZ1005S102E
MMZ1005S182E
MMZ1005A601E
MMZ1005A102E
MMZ1005A152E
MMZ1005A182E
MMZ1005A222E
MMZ1005D121E
MMZ1005D221E
MMZ1005F470E
MMZ1005F750E
MMZ1005F121E

[100MHz]
[1GHz]
600±25%
1000±25%
1800±25%
600±25%
1000±25%
1500±25%
1800±25%
2200±25%
120±25%
220±25%
47±25%
75±25%
120±25%
1000±40%
1400±40%
1800±40%
1400±40%
2000±40%
2300±40%
2700±40%
3000±40%
1000±40%
1700±40%
800±40%
1500±40%
2300±40%
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
DC
resistance
( )max.
0.65
1.00
1.50
0.80
1.20
1.60
2.10
2.20
0.70
1.00
0.70
1.00
1.50
Rated
current
(mA)max.
300
250
200
300
250
230
200
150
300
250
300
250
200
10s max.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
Test temperature: 25±10°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(27/28)
TYPICAL ELECTRICAL CHARACTERISTICS
Z FREQUENCY CHARACTERISTICS(DIFFERS ACCORDING TO SERIES)
MMZ1005S-E SERIES
MMZ1005A-E SERIES
MMZ1005S182E
MMZ1005S102E
2000
Impedance (Ω)
Impedance (Ω)
2500
MMZ1005S601E
1500
1000
500
0
1
10
100
1000
Frequency (MHz)
10000
5000
MMZ1005A222E
4500
MMZ1005A182E
4000
MMZ1005A152E
3500
MMZ1005A102E
3000
MMZ1005A601E
2500
2000
1500
1000
500
0
1
10
100
1000
Frequency (MHz)
Impedance (Ω)
3000
MMZ1005D-E SERIES
10000
2000
1800
1600
1400
1200
1000
800
600
400
200
0
MMZ1005D221E
MMZ1005D121E
1
10
100
1000
Frequency (MHz)
10000
MMZ1005F-E SERIES
3000
MMZ1005F121E
Impedance (Ω)
2500
MMZ1005F750E
2000
MMZ1005F470E
1500
1000
500
0
1
10
100
1000
Frequency (MHz)
10000
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1005S601E
MMZ1005S102E
1000
MMZ1005S182E
3000
1600
1400
2500
1200
Z
Impedance(Ω)
Z
Impedance(Ω)
Impedance(Ω)
800
1000
600
R
400
800
600
X
1
10
100
1000
Frequency (MHz)
0
10000
MMZ1005A601E
1
10
100
1000
Frequency (MHz)
400
2000
1
10
100
1000
Frequency (MHz)
0
R
1000
500
10000
10000
1500
R
1000
X
200
100
1000
Frequency (MHz)
Z
Impedance(Ω)
Impedance(Ω)
Impedance(Ω)
R
600
0
Z
1500
800
10
2500
2000
Z
1
3000
2500
1000
X
MMZ1005A152E
1400
1200
Z
1000
0
10000
MMZ1005A102E
1600
R
1500
500
200
0
2000
400
X
200
R
1
10
100
1000
Frequency (MHz)
X
500
X
10000
0
1
10
100
1000
Frequency (MHz)
10000
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz
(28/28)
3500
4500
3000
4000
3500
2500
Impedance(Ω)
Impedance(Ω)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MMZ1005A182E
MMZ1005A222E
Z
2000
R
1500
1000
0
2500
R
2000
1500
1000
X
500
Z
3000
X
500
1
10
100
1000
Frequency (MHz)
0
10000
MMZ1005D121E
1
10
100
1000
Frequency (MHz)
10000
MMZ1005D221E
1200
2000
1000
Impedance(Ω)
Impedance(Ω)
1500
800
Z
600
R
400
Z
R
1000
500
X
200
X
1
10
100
1000
Frequency (MHz)
0
10000
MMZ1005F470E
100
1000
Frequency (MHz)
10000
MMZ1005F121E
3000
1800
1600
1000
2500
1400
Impedance(Ω)
800
R
400
1000
Z R
800
600
400
200
1
10
100
1000
Frequency (MHz)
0
10000
Z R
1500
1000
500
200
X
2000
X
X
1
10
PACKAGING STYLES
REEL DIMENSIONS
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
0.8max.
0.65±0.1
4.0±0.1
2.0±0.05
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
160min.
Taping
2.0±0.05
1.15±0.1
ø60min.
8.0±0.3
1.0
3.5±0.05
Z
600
1200
1.75±0.1
Impedance(Ω)
10
MMZ1005F750E
1200
0
1
Impedance(Ω)
0
200min.
ø21±0.8
ø180±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
002-01 / 20130301 / e9412_mmz