EMC MPZ2012S601A

(1/2)
Chip Beads(SMD)
For Power Line
Conformity to RoHS Directive
MPZ Series MPZ2012 Type
APPLICATIONS
Noise elimination of DC power supply lines for USB interface
circuitry, personal computers, electronic games, hard disk drives,
and other general electronic equipment.
Also effective as a noise countermeasure in signal lines.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
1.2
1.25±0.2
2+0.3, –0.1
0.5±0.3
1.3
1
1.3
0.85±0.2
FEATURES
• The MPZ series are multilayer chip impeders for power supply
line applications.
• High miniaturized, these parts nonetheless exhibit low DC
resistance and high current handling capability.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
Weight: 8mg
Dimensions in mm
TEMPERATURE RANGES
Operating/storage
–55 to +125°C
PACKAGING STYLE AND QUANTITIES
PRODUCT IDENTIFICATION
Packaging style
Taping
MPZ 2012 S 331 A T
(1)
(2) (3) (4) (5) (6)
(1)Series name
(2)Dimensions L× W
(3)Material code
(4)Nominal impedance
331: 330Ω at 100MHz
(5)Characteristic type
(6)Packaging style
T: Taping
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
Quantity
4000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• The inductance value may change due to magnetic saturation if
the current exceeds the rated maximum.
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
004-03 / 20061022 / e9413_mpz.fm
(2/2)
ELECTRICAL CHARACTERISTICS
Part No.
MPZ2012S300A
MPZ2012S101A
MPZ2012S221A
MPZ2012S331A
MPZ2012S601A
RATED CURRENT vs. TEMEPERATURE CHARACTERISTICS
(DERATING)
Rated current∗2
(A)max.
5
4
3
2.5
2
DC resistance
(Ω)max.
0.01
0.02
0.04
0.05
0.1
6
5
Rated current(A)
Impedance
(Ω)[100MHz]∗1
30±10Ω
100±25%
220±25%
330±25%
600±25%
∗1 Test
equipment: E4991A or equivalent
Test tool: 16192A or equivalent
∗2 Please refer to the graph of RATED CURRENT vs. TEMPERATURE
CHARACTERISTICS(DERATING) about the rating current at 85°C or
more in temperature of the product.
4
3
2
S300A
S101A
S221A
S331A
S601A
1
0
–55 –35
–15
5
25
45
65
Temperature(˚C)
TYPICAL ELECTRICAL CHARACTERISTICS
Z, X, R vs. FREQUENCY CHARACTERISTICS
MPZ2012S300A
MPZ2012S101A
50
R
20
X
10
250
120
Impedance(Ω)
Impedance(Ω)
100
Z
80
R
60
X
40
200
Z
100
X
50
20
0
1
10
100
1000
Frequency (MHz)
0
10000
1
800
350
700
300
250
Z
R
200
150
X
100
100
1000
Frequency (MHz)
0
10000
1
10
100
1000
Frequency (MHz)
10000
600
500
Z
400
R
300
200
50
X
100
1
10
100
1000
Frequency (MHz)
0
10000
1
10
PACKAGING STYLES
REEL DIMENSIONS
100
1000
Frequency (MHz)
10000
TAPE DIMENSIONS
Sprocket hole
1.5 +0.1
–0.0
Cavity
1.1max.
1.5±0.2
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.5
ø13±0.5
9.0±0.3
160min.
Taping
2.3±0.2
ø60±2.0
8.0±0.3
1.0
3.5±0.05
0
10
MPZ2012S601A
400
Impedance(Ω)
Impedance(Ω)
MPZ2012S331A
R
150
1.75±0.1
Impedance(Ω)
Z
125
300
140
30
105
MPZ2012S221A
160
40
85
200min.
13.0±1.4
ø21±0.8
ø178±2.0
Dimensions in mm
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
004-03 / 20061022 / e9413_mpz.fm