SMA Male Connector Solder Attachment For PE-034SR TECHNICAL DATA SHEET PE4917 SMA Male Connector Solder Attachment For PE-034SR Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male PE-034SR Solder/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.492 [12.5] 0.312 [8] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold Brass, Nickel 5/16 5 [0.57] Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Connector Solder Attachment For PE-034SR from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Connector Solder Attachment For PE-034SR PE4917 URL: http://www.pasternack.com/sma-male-standard-pe-034sr-connector-pe4917-p.aspx PE4917 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4917 REV 3. USING ASSEMBLY TOOL, PRESS CONTACT FULLY INTO INSULATOR. SOLDER OUTER CONDUCTOR TO BODY. 2. INSERT CENTER CONDUCTOR INTO CONTACT UNTIL DIELECTRIC BOTTOMS INSIDE CONTACT. SOFT SOLDER CONTACT TO CENTER CONDUCTOR. DO NOT OVER HEAT DIELECTRIC. 1. STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. SLIDE CABLE THROUGH BODY. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4917 DWG TITLE CAD FILE 061302 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMA Male Connector Solder Attachment For PE-034SR PE4917 CAD Drawing 2