SMA Male Connector Clamp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4214 SMA Male Connector Clamp/Solder Attachment For RG178, RG196 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male RG178,RG196 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.728 [18.49] 0.312 [7.92] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold Brass, Nickel 5/16 5 [0.57] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Connector Clamp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Connector Clamp/Solder Attachment For RG178, RG196 PE4214 URL: http://www.pasternack.com/sma-male-standard-rg178-rg196-connector-pe4214-p.aspx PE4214 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4214 REV 01 3. SOLDER CONTACT ONTO CENTER CONDUCTOR. INSERT ASSEMBLY INTO BODY AND TIGHTEN. REV. A CAD FILE 090308 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4214 DWG TITLE 2. FLARE BRAID AND SLIDE CONTACT ASSEMBLY OVER DIELECTRIC AND UNDER BRAID UNTIL THE CONTACT ASSEMBLY STOPS. TRIM EXCESS BRAID TO DIAMETER OF THE CONTACT ASSEMBLY. 1. SLIDE CLAMP NUT OVER CABLE. STRIP CABLE AS SHOWN. ASSEMBLY PROCEDURES SMA Male Connector Clamp/Solder Attachment For RG178, RG196 PE4214 CAD Drawing 2