7/16 DIN Male Connector Clamp/Solder Attachment For RG218 TECHNICAL DATA SHEET PE44277 7/16 DIN Male Connector Clamp/Solder Attachment For RG218 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style 7/16 DIN Male RG218 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 2.675 [67.95] 1.312 [33] Weight, lbs [g] 0.577 [261.72] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in Torque, in-lbs [Nm] Body Material and Plating Dielectric Type 7/16 DIN Male Silver Brass, Nickel 1 1/4 18 [2.03] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 7/16 DIN Male Connector Clamp/Solder Attachment For RG218 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 7/16 DIN Male Connector Clamp/Solder Attachment For RG218 PE44277 URL: http://www.pasternack.com/7-16-male-standard-rg218-connector-pe44277-p.aspx PE44277 REV 1 © 2013 Pasternack Enterprises All Rights Reserved 2. 1. PE44277 REV FSCM NO. 53919 PE44277 DWG TITLE FORM BRAID OVER CLAMP NUT (3). CUT DIELECTRIC & CENTER CONDUCTOR TO DIMENSION SHOWN. SLIDE WASHER (4) & REAR INSULATOR (5) OVER. DIELECTRIC. SOLDER CONTACT (6) TO CENTER CONDUCTOR. SLIDE FRONT INSULATOR (7) OVER CONTACT. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. SLIDE CLAMP NUT (1) & GASKET (2) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. COMB OUT BRAID. TAPER END OF BRAID TO PERMIT ASSEMBLY OF THE BRAID CLAMP (3). SLIDE BRAID CLAMP (3) OVER BRAID & AGAINST CABLE ASSEMBLY PROCEDURES CAD FILE 070202 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 7/16 DIN Male Connector Clamp/Solder Attachment For RG218 PE44277 CAD Drawing 2