SHC SHCD SHCS SHCSD .100 GRID SURFACE MOUNT COMMERCIAL/INDUSTRIAL RELAYS ■ ■ ■ SHC SHCS SHCD SHCSD STANDARD • SENSITIVE .100 GRID SURFACE MOUNT COMMERCIAL RELAY STANDARD • SENSITIVE .100 GRID SURFACE MOUNT DIODE SUPPRESSED COMMERCIAL RELAY ■ ■ _ + TERMINAL VIEW TERMINAL VIEW FEATURES FEATURES ■ ■ Hermetically sealed Excellent RF switching ■ ■ ■ Suppression Diode Hermetically sealed Excellent RF switching ELECTRICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS CONTACT ARRANGEMENT COIL VOLTAGE 2 Form C (DPDT) 5 to 26.5 Vdc (SHC/SHCD) 5 to 48 Vdc (SHCS/SHCSD) CONTACT MATERIAL Stationary: Gold/platinum/palladium/silver alloy (gold plated) Moveable: Gold/platinum/palladium/silver alloy (gold plated) COIL POWER CONTACT RESISTANCE Continuous Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) PICK-UP VOLTAGE MECHANICAL LIFE EXPECTANCY 1 million operations SHC/SHCD: 660 mW max. @ 25°C SHCS/SHCSD: 565 mW max. @ 25°C DUTY CYCLE Approximately 70% of nominal coil voltage PICK-UP SENSITIVITY SHC/SHCD: 180 mW max. @ 25°C SHCS/SHCSD: 90 mW max. @ 25°C CONTACT RATINGS CONTACT LOAD 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc TYPE OPERATIONS MIN. Resistive 100,000 Resistive (Case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 28 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation SHC SHCD SHCS SHCSD ■ ■ ■ STANDARD COIL DATA TIMING NOM. COIL VOLTAGE (Vdc) OperateTime: SHC/SHCD: 4.0 ms max. SHCS/SHCSD: 6.0 ms max. ReleaseTime: SHC: 3.0 ms max. SHCS: 3.0 ms max. SHCD: 6.0 ms max. (suppression diode) SHCSD: 7.5 ms max. (suppression diode) Between Open Contacts: 350 Vrms 60 Hz Between Adjacent Contacts: 350 Vrms 60 Hz Between Contacts & Coil: 350 Vrms 60 Hz PICKUP VOLTAGE Vdc (MAX.) @ 25°C NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. 5.0 6.0 9.0 12.0 18.0 26.5 64 98 220 400 880 1,600 3.8 4.9 7.0 9.0 14.0 18.0 391 367 368 360 368 439 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 SHCS/SHCSD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 100 200 400 800 1,600 3,200 6,500 11,000 3.5 4.5 6.8 9.0 13.5 18.0 24.0 32.0 250 180 203 180 203 219 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 SHC/SHCD DIELECTRIC WITHSTANDING VOLTAGE COIL RESISTANCE IN OHMS ±20% @ 25°C INSULATION RESISTANCE 1,000 megohms @ 500 Vdc .378 +.030/–.020 (9.60) TYP ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE .031 ± .003 (0.79) .335 (8.51) SQ MAX .035 ± .010 (0.98) REF -55°C to + 85°C WEIGHT .280 (7.11) MAX SHC/SHCD: 0.09 oz. (2.55 gms) SHCS/SHCSD: 0.15 oz. (4.30 gms) .360 (9.14) MAX .375 (9.53) SQ MAX 2° ±2° TYP VIBRATION RESISTANCE 10 G’s, 10 to 500 Hz ±4° TYP SHOCK RESISTANCE 30 G’s, 6 ±1 ms SHC/SHCD ENCLOSURE .100 (2.54) TYP 8 PLS SHC/SHCD/SHCS/SHCSD HEADER SEMICONDUCTOR CHARACTERISTICS DIODE 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage .410 (10.41) MIN .045 (1.14) MIN. 8 PLCS .335 (8.51) SQ MAX .380 (9.65) MAX .460 (11.68) MAX 2° ±2° TYP .410 (10.41) MIN .200 (5.08) .100 (2.54) 4 PLCS .100 GRID SURFACE MOUNT COMMERCIAL/INDUSTRIAL RELAYS OPERATING CHARACTERISTICS .200 (5.08) SHCS/SHCSD ENCLOSURE SPECIFYING A PART NUMBER EXAMPLE: TYPE DIODES GROUND PIN COILS SHC D X -26 RECOMMENDED SOLDER PAD LAYOUT Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation 29