2N6078 MECHANICAL DATA Dimensions in mm(inches) 2 11.94 (0.470) 12.70 (0.500) 1 0.71 (0.028) 0.86 (0.034) 3.61 (0.142) 4.08(0.161) rad. 14.48 (0.570) 14.99 (0.590) 24.13 (0.95) 24.63 (0.97) NPN MULTI - EPITAXIAL POWER TRANSISTOR 6.35 (0.250) 8.64 (0.340) 3.68 (0.145) rad. max. FEATURES • HIGH VOLTAGE • LOW SATURATION VOLTAGES • HIGH RELIABILITY 1.27 (0.050) 1.91 (0.750) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. APPLICATIONS • POWER SWITCHING CIRCUITS TO–66(TO213AA) • LINEAR APPLICATIONS PIN 1 — Base PIN 2 — Emitter Case is Collector . ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage (IE = 0) 275V VCEX Collector – Emitter Voltage (VEB - 1.5V) 275V VCEO Collector – Emitter Voltage (IB = 0) 250V VCER Collector – Emitter Voltage ( RBE <50Ω) 275V VEBO Emitter – Base Voltage (IC = 0) 6V IC Collector Current 7A ICM Peak Collector Current 10A IB Base Current 4A Ptot Total Power Dissipation at Tcase ≤ 25°C Tstg, Storage Temperature –65 to 200°C Tj Junction Temperature 200°C 45W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6364 Issue 1 2N6078 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(BR)* Collector - Emitter Breakdown Voltage VEBO Emitter – Base Voltage ICEV Collector Cut-off Current IEBO Emitter Cut-off Current VCE(sat)* VBE(sat)* hFE* IS/b Test Conditions IC = 0.2mA Min. Typ. Max. Unit 250 V 6 V IE = 1.0mA IC = 0 VCE = 250V VBE = –1.5V 0.05 mA TCASE =125°C 0.2 mA IC = 0 VEB = -6V 1.0 mA Collector – Emitter Saturation IC = 1.2A IB = 0.2A 0.15 0.5 Voltage IC = 5A IB = 1.0A 0.8 3 Base – Emitter IC = 1.2A IB = 0.2A 1.0 1.6 Saturation Voltage IC = 5A IB = 1.0A 1.5 2 DC Current Gain IC = 1.2A VCE = 1.0V 28 70 — 0.9 A 150 pF Second Breakdown Collector Current 12 VCE = 50V Cobo Output Capacitance VCB = 10V tr Rise Time ts Storage Time VC = 250V tf Fall Time IB = 0.2A td Delay Time IE = 0 0.3 0.75 IC = 1.2A 2.8 5 IB1 = IB2 0.3 0.75 V V µs 0.02 THERMAL CHARACTERISTICS RθJC Thermal Resistance Junction to Case 3.9 °C/W * Pulse test tp = 350µs , δ = 2 % Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 6364 Issue 1