SEME-LAB BUX23

BUX23
MECHANICAL DATA
Dimensions in mm(inches)
25.15 (0.99)
26.67 (1.05)
6.35 (0.25)
9.15 (0.36)
1.52 (0.06)
3.43 (0.135)
2
22.23
(0.875)
max.
0.97 (0.060)
1.10 (0.043)
16.64 (0.655)
17.15 (0.675)
29.9 (1.177)
30.4 (1.197)
38.61 (1.52)
39.12 (1.54)
10.67 (0.42)
11.18 (0.44)
1
NPN MULTI - EPITAXIAL
POWER TRANSISTOR
FEATURES
• HIGH CURRENT
• FAST SWITCHING
3
(case)
• HIGH RELIABILITY
3.84 (0.151)
4.09 (0.161)
7.92 (0.312)
12.70 (0.50)
APPLICATIONS
• POWER SWITCHING CIRCUITS
TO–3(TO204AA)
• MOTOR CONTROL
PIN 1 — Base
PIN 2 — Emitter
Case is Collector
.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VCBO
Collector – Base Voltage (IE = 0)
400V
VCEX
Collector – Emitter Voltage
400V
VCEO
Collector – Emitter Voltage (IB = 0)
325V
VCER
Collector – Emitter Voltage
390V
VEBO
Emitter – Base Voltage (IC = 0)
7V
IC
Collector Current
30A
ICM
Peak Collector Current (tp = 10 ms)
40A
IB
Base Current
6A
Ptot
Total Power Dissipation at Tcase ≤ 25°C
Tstg,
Storage Temperature
–65 to 200°C
Tj
Junction Temperature
200°C
350W
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 6344
Issue 1
BUX23
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
Parameter
VCEO(BR)*
Collector - Emitter Breakdown
Voltage
Test Conditions
IC = 0.2mA
Min.
Typ.
Max. Unit
325
V
7
V
VEBO
Emitter – BaseVoltage
IE = 50mA
IC = 0
ICEO
Collector Cut-off Current
VCE = 260V
IB = 0
3
VCE = 400V
VBE = –1.5V
3
VCE = 400V
VBE = –1.5V
12
mA
1.0
mA
ICEX
Collector Cut-off Current
mA
TC = 125°C
IEBO
VCE(sat)*
VBE(sat)*
hFE*
IS/b
Emitter Cut-offCurrent
IC = 0
VEB = 5V
Collector – EmitterSaturation
IC = 8A
IB = 1.6A
0.2
0.8
Voltage
IC = 16A
IB = 3.2A
0.35
1.0
IC = 16A
IB = 3.2A
1.15
1.5
IC = 8A
VCE = 4V
15
IC = 16A
VCE = 4V
8
Second Breakdown
VCE = 140V
t = 1s
0.15
Collector Current
VCE = 16V
t = 1s
22
IC = 2A
VCE = 15V
Base – Emitter
Saturation Voltage
DC Current Gain
60
V
—
A
fT
Transition Frequency
ton
Turn–On Time
IC = 16A
IB1 =3.2A
0.55
1.3
ts
Storage Time
IC = 16A
IB1 =3.2A
1.7
2.5
tf
Fall Time
IB2 = –3.2A
0.26
1.2
f = 10MHz
V
8
MHz
μs
THERMAL CHARACTERISTICS
RθJC
Thermal Resistance Junction to Case
0.5
°C/W
* Pulse test tp = 300μs , δ = 1.5 %
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 6344
Issue 1