DESCRIPTION C REVISED PER ECR-ER17437 BY APPD DATE 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER CTC 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. REV CY 09/09/09 NOTES: UNLESS OTHERWISE SPECIFIED 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 4. CONTACT AND FERRULE SHIPPED LOOSE. 5. FOR USE WITH TACHII CABLE TCX-3C2V & TCX-3C2VS OR EQUIVALENT. 6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5005 (.232 HEX, .054 SQUARE FLAT). 7. ASSEMBLE TO CABLE USING CAP-E01. MARKING: KINGS+2065+CABLE CODE+ DATE CODE+LACATION CODE 8. THESE AREA HAVE WHITE MARKING. 9. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 25 dB MIN (DC TO 3 GHz) .127 3.23 .198 5.03 .270 6.86 .234 5.94 .591 15.01 SEE NOTE 8 ( .354 8.99 1.372 34.85 ) WHEN ASSEMBLED .138 3.51 CATALOG P/N: 2065-E00-3C201N .748 19.00 RECOMMENDED CABLE TRIMMING DIMENSIONS PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .0005 ANGLES: ± 2° SCALE: 2:1 WincheserElecronics ® CUSTOMER DRAWING DRAWN CY APPROVED DCT DATE APPROVED 03/21/08 RAF DATE APPROVED 03/26/08 DCam DATE 03/26/08 DATE 03/26/08 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 PLUG FOR TACHII TCX-3C2V(S) (ROHS COMPLIANT) A SD2065-E00-3C201N SHT 1 OF 1 REV C