HFE1600 Series 1600W 1U Front End Power Supplies Features u 1U rackmount containing up to 5 units u Internal ORing MOSFET & Current Share u High Efficiency u Up to 7600W in 1U rack u Full array of signals available Key Market Segments & Applications Specifications Model Input Voltage Range (2) VAC 85 - 265VAC, 47 - 63Hz. See model selector for power derating Input Current (Max) 100/230VAC A 14.2 / 8.1A Inrush Current A <35A Power Factor Correction Meets EN61000-3-2, PF > 0.98 at full load Temperature Coefficient %/°C <0.02%/°C Overcurrent Protection % 105 - 120% Overvoltage Protection (1) % 110% (Tracking). Cycle AC to reset or utilize Remote On/Off Overtemperature Protection (1) Shutdown with automatic reset. Warning signal provided Hold up time ms >10ms, 100/230VAC Input, 80% loading Leakage Current mA < 0.75 / 1.5mA 100/230VAC, 60Hz Remote Sense Compensation HFE1600-12: 0.5V/wire, HFE1600-24, -48: 1V/wire Indicators AC OK: Green LED, DC OK / Fail: Green / Red LED Remote On/Off Unit ON: 0 - 0.6V or short, OFF: 2 - 15V or open circuit Parallel Operation (1) Yes, single wire current share, 90% accuracy, up to 10 units AC Fail Signal Open Collector, ON when AC is within 85 - 270VAC DC Good Signal Open Collector, ON when output is above 85 to 95% of setpoint (tracking) Remote Adjust (1) By either external 0 - 5V signal or 1k potentiometer I2C Interface (1) Isolated from output, Add suffix /S, PMBus compatible Auxiliary Output 11.2 - 12.5V, 0.5A, 240mV ripple and noise Operating Temp. (-TB Rack) °C -10 to +70°C, derate 2%/°C from 50 to 60°C, 2.5%/°C from 60 to 70°C Operating Temp. (-IEC320 Rack) °C -10 to +60°C, derate 2%/°C from 50 to 60°C Storage Temperature °C -30 to +85°C Humidity (Non condensing) %RH Operating: 10 - 90%RH, Storage: 10 - 95%RH Cooling Two variable speed internal fans, airflow exits across input/output connector Withstand Voltage I/P to O/P 3kVAC, I/P to GND 2kVAC, O/P to GND: HFE1600-12,-24V 500VAC, HFE1600-48 1.5kVAC Isolation Resistance MΩ >100MΩ at 25°C & 70%RH, Output to Ground 500VDC Vibration (Basic transportation) Meets IEC60068-2-64 Shock (Basic transportation) Meets IEC60068-2-27 Safety Agency Certifications UL60950-1 (Listed), EN60950-1, CE Mark Line Dip Complies with SEMI F47 (200VAC line only) Conducted and Radiated EMI EN55022 & FCC part 15; Conducted class B, Radiated class A Immunity IEC61000-4-2 (lv 2,3), -3 (lv 2), -4 (lv2), -5 (lv3,4), -6 (lv2), -8 (lv 4), -11 Size (W x H x D) in Power Supply: 3.35 x 1.61 x 11.8”, Rack: 17.5 x 1.72 x 14.4” Weight g Power Supply: 1550g, Rack: 4800g Warranty yrs Three Years (1) See installation manual for detailed specifications & test methods (2) Derate output power linearly 1%/V from 100VAC to 85VAC input 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 56 Disclaimer: us.tdk-lambda.com/lp/legal.htm HFE1600 Series Model Selector Model Output Voltage Adjust Range(1) Max Current (Vin>170VAC) Max Power (Vin>170VAC) Max Current (100<Vin<170VAC)(2) Max Power (100<Vin<170VAC)(2) 12V 12V 24V 24V 48V 48V 9.6 - 13.2V 9.6 - 13.2V 19.2 - 29V 19.2 - 29V 38.4 - 58V 38.4 - 58V 133A 133A 67A 67A 33A 33A 1596W 1596W 1608W 1608W 1584W 1584W 100A 100A 50A 50A 25A 25A 1200W 1200W 1200W 1200W 1200W 1200W Load Reg Line Reg Ripple & Noise(1) Efficiency (%)(3) I2C 60mV 60mV 120mV 120mV 240mV 240mV 30mV 30mV 60mV 60mV 120mV 120mV 240mV 240mV 240mV 240mV 480mV 480mV 87 / 90% 87 / 90% 88 / 90% 88 / 90% 89 / 92% 89 / 92% Yes Yes Yes HFE1600-12 HFE1600-12/S HFE1600-24 HFE1600-24/S HFE1600-48 HFE1600-48/S Model HFE1600-12 HFE1600-12/S HFE1600-24 HFE1600-24/S HFE1600-48 HFE1600-48/S (3) At 75% load, 100 / 230VAC input Accessories Model Description Maximum Rack Current HFE1600-S1U Five slot 19” rack, IEC320-C16 input connectors (5) 200A each side (400A total) HFE1600-S1U-TB HFE1600/BP HFE/C15U Five slot 19” rack, Terminal Block input connectors (5) One slot blanking panel, three provided with each rack AC Power cord, 2.0m long, one per power supply required 200A each side (400A total) - Outline HFE1600 Outline HFE1600S1U 55.0 20.0 TYPx2 14.0 TYPx2 -V " 40.8 ±0.2 OUTPUT BUS BAR " +V " MODULE " 13.0 TYPx2 A" 13.0 TYPx2 MODULE " B" MODULE " C" MODULE " D" MODULE " 114.0 E" SEE NOTE 2. 15.0 TYPx2 20.4 2.2 ±0.2 OUTPUT BUS BAR " -V " OUTPUT BUS BAR " +V " 80.5 14.0 TYPx2 OUTPUT BUS BAR " 290.0 236.6 55.0 14.0 74.0 10.8 42.2 24.0 TYP PMBUS ADRESS SEE NOTE 4. M5 HOLES FOR MOUNTING BRACKETS. 4 PLACES (SEE NOTE 3.) 85.0 ±0.5 SEE NOTE 2 POWER SUPPLY LOCKING 86.2 ±0.5 12V 24V 32V 48V 12V 24V 32V 48V 12V 24V 32V 48V 12V 24V 32V 48V 12V 24V 32V 48V MODEL KEY FOR DIFFERENT OUTPUT VOLTAGE MODELS. ±1.0 390.5 ±1.0 ±1.0 370.0 365.0 12.1 308.0 TYPx2 REAR VIEW HOLES FOR BLANK PANEL MOUNTING. USE FLAT HEAD SCREW M3x6 10 PLACES MARKED "A" IN/OUT CONNECTOR SEE NOTE 1. 43.0 16.0 TYPx2 FRONT VIEW 21.4 320.4 ±1.0 311.0 ±1.0 300.0 ±0.5 A A A A A 9.4 ±1.0 483.0 ±1.0 466.2 ±0.5 SEE NOTE 1. 43.0 252.0 NOTES 1. MOUNTING HOLES FOR RACK 19". USE M6x12 SCREWS TO FIX THE UNIT TO A RACK. 2. USE NUT,FLAT WASHER AND SPRING WASHER FOR LOAD WIRES FIXING. USE M6 LUG FOR LOAD WIRES.RECOMMENDED TORQUE: 42-56 Kgf.cm 3. TO FIX THE MOUNTING BRACKET TO THE CHASSIS USE M5x10 SEMS SCREWS .RECOMMENDED TIGHTENING TORQUE 27~31Kgf.cm. SCREWS MUST NOT PENETRATE THE CHASSIS MORE THAN 6.0 mm. 4. REFER TO INSTRUCTION MANUAL FOR SETTING DETAILS. 5. MODEL NAME, VOLTAGE AND CURRENT RATING AND SAFETY APPROVALS SYMBOLS WILL BE SHOWN HERE ACCORDING TO THE SPECIFICATION. ±0.5 MOUNTING HOLES M4 MARKED "A" 2 HOLES ON EACH SIDE. 6. THE HFE-S1U RACK IS SHOWN WITH 5 HFE1600 UNITS INSTALLED. 6.0 22.8 ±0.5 43.6 A A 31.7 + 0.4 0.0 24.5 11.4 445.0 For Additional Information, please visit us.tdk-lambda.com/lp/products/hfe-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 57 Revision A9: Oct 2012