Piggyback Shrink Boot Connector Adapters 317-102 EMI/RFI Environmental Piggyback Boot Adapter, Composite with Drop-In Banding Porch Fast and Easy Installation of Boots and EMI/RFI Shielding Bands How To Order Product Series Angular Function S = Straight 317 F S Finish Sym (Table II) Boot Material Type (Table IV) 102 XB 16 - 2 Basic No. Connector Designator A = MIL-DTL-83723, Series III; MIL-DTL-5015; MIL-DTL-26482 F = MIL-DTL-38999, Series I & II H = MIL-DTL-38999, Series III & IV Shell Size (Table III) K A = Pre-Coiled Band (Omit If Not Required) Anti-Rotation Device C Hex Flats .940 (23.9) Max O-Ring A Thread Hot Melt Adhesive M As Supplied B Material and Finish Coupling Nut, Sleeve, Anti-Rotation Device: High Temp. Engineering Thermoplastic (black)/N.A. Adapter: Table II O-Ring: Silicone/N.A. Shrink Boot: Elastomeric/N.A. Band: SST/Passivated PRE-COILED BAND GLENAIR PART NO. 600-057-1 Notes See Table I on page 3 for front-end dimensional details. Assembly identified with manufacturer’s name and part number, space permitting. Glenair 600-091 or 600-157 Series Backshell Assembly Tools are recommended for assembly and installation. O-Ring supplied with Connector Designator F & H only. O-Ring not supplied with Connector Designator A. Dimensions in Inches (millimeters) are subject to change without notice. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 6 E-Mail: [email protected] Piggyback Shrink Boot Connector Adapters 317-102 EMI/RFI Environmental Piggyback Boot Adapter, Composite with Drop-In Banding Porch Table III: Key Dimensions Connector Designator A Dash No. Shell Size Ref. 08 08 10 10 12 12 14 16 Connector Designator F A Thread Class 2B Connector Designator H ØB Ref. Dash No. Shell Size Ref. A Thread Class 2B Dash No. Shell Size Ref. A Thread ISO Metric 1/2-20 UNF 08 08 7/16-28 UNEF 09 A M12 X 1.0-6H 5/8-24 UNEF 10 12 9/16-24 UNEF 11 B M15 X 1.0-6H .938 (23.8) 3/4-20 UNEF 12 12 11/16-24 UNEF 13 C M18 X 1.0-6H 1.125 (28.6) 14 7/8-20 UNEF 14 14 13/16-20 UNEF 15 D M22 X 1.0-6H 1.250 (31.8) 16 1-20 UNEF 16 16 15/16-20 UNEF 17 E M25 X 1.0-6H 1.375 (34.9) 18 18 1 1/16-18 UNEF 18 18 1 1/16-18 UNEF 19 F M28 X 1.0-6H 1.500 (38.1) 20 20 1 3/16-18 UNEF 20 20 1 3/16-18 UNEF 21 G M31 X 1.0-6H 1.625 (41.3) 22 22 1 5/16-18 UNEF 22 22 1 5/16-18 UNEF 23 H M34 X 1.0-6H 1.750 (44.5) 24 24 1 7/16-18 UNEF 24 24 1 7/16-18 UNEF 25 J M37 X 1.0-6H 1.875 (47.6) .812 (20.6) Table III: Key Dimensions (CON"T) C Flats Dash No. Max Min ØG M Min N Max 08 .750 (19.1) .736 (18.7) .140 (3.60) .250 (6.40) .197 (5.00) 10 12 .875 (22.2) .860 (21.8) .270 (6.90) .355 (9.00) .197 (5.00) 1.000 (25.4) .980 (24.9) .390 (9.90) .491 (12.5) 14 .236 (6.00) 1.125 (28.6) 1.100 (27.9) .512 (13.0) .565 (17.5) .236 (6.00) 16 1.250 (31.8) 1.224 (31.1) .637 (16.2) .690 (19.5) .276 (7.01) Sym 18 1.375 (34.9) 1.348 (34.2) .757 (19.2) .769 (21.4) .335 (8.51) XB 20 1.500 (38.1) 1.469 (37.3) .881 (22.4) .894 (22.7) .394 (10.0) XMT Ni-PTFE, Nickel-Fluorocarbon Polymer 22 1.625 (41.3) 1.581 (40.2) 1.006 (25.6) 1.019 (25.9) .394 (10.0) 24 1.750 (44.5) 1.690 (42.9) 1.131 (28.7) 1.134 (28.8) .591 (15.0) XN Selective Plating, Nickel and Cadmium Olive Drab (See Detail B) Table II: Backshell Finish Options Finish Description Electroless Nickel Termination Area Free of Cadmium N After Unrestricted Shrinkage G B DROP-IN BANDING ADAPTER DETAIL B FINISH XN Table IV: Boot Material Selection Guide Attribute Continuous Operating Temp. Resistence To Fuels, Oils Low Toxicity, Zero Halogen Type 1 High-Performance Semi-Rigid Elastomer -75° to +150° c Excellent No Type 2 Zero-Halogen Semi-Rigid Polyolefin -30° to +135° c Very Good Yes Type 3 General Purpose Flexible Polyolefin -55° to +135° c Good No Dimensions in Inches (millimeters) are subject to change without notice. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 7 E-Mail: [email protected]