CCSO-914X Ultra-Low Phase Noise SAW Clock Frequency Range: 245.760 MHz to 1090 MHz True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt CCSO-914X3-250.000 K STE 4X Y R C O-91 CCS 0 MHz 25 -15 Bc 3d z /H Model CCSO-914X is a SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -138 dBc/Hz phase noise at 10 kHz offset at 1 GHz, 3.3V & 5V input voltage available, -40°C to +85°C operating temperature, FR5 PCB and 9×14 mm SMT package. The oscillator has no sub-harmonic and the second harmonic is typically -20 dBc. Applications include: Analog to Digital Converters (A/D Converters), System Clock for Network Clock Generator/ Synchronizer, Clock for DDS, Test and Measurement, Avionics, Point-to-Point Radios, and Rev: P Multi-point Radios. Date: 10-Jul-2015 Page 1 of 4 C CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt Frequency Range: Temperature Range: Storage: Input Voltage: (option 3) (standard) Frequency vs Temperature: Input Current: Output: Output Power: (3.3V) (5.0V) Start-Up Time: 2nd Harmonic: Sub-Harmonics: 245.760 MHz to 1090 MHz -40°C to +85°C -45°C to 90°C 3.3V ± 0.165V 5.0V ±0.25V ±150ppm Typical 25mA Typical, 35mA Max True SineWave +5dBm Min into 50 Ω Load +8dBm Min into 50 Ω Load 2mSec Typical, 10mSec Max -20dBc Typical, -15dBc Max None Phase Noise Typical @ 1 GHz: 1kHz 10kHz 100kHz 1MHz 10MHz -110 dBc/Hz -138 dBc/Hz -150 dBc/Hz -160 dBc/Hz -170 dBc/Hz G-sensitivity: 0.9×10-9 per g 0.090 (2.29) SUGGESTED PAD LAYOUT 0.040 (1.01) 0.050 (1.27) 0.560 (14.2) 0.090 (2.29) CRYSTEK Part Number Frequency Date Code 0.360 (9.14) 0.180 (4.57) 0.125 (3.18) 0.560 (14.2) 1 2 4 3 0.100 (2.54) 0.280 (7.11) 0.040 (1.02) 0.050 (1.27) 0.280 (7.11) 0.200 (5.08) 0.200 (5.08) See Table A Package Height Options inches mm Standard 0.210 5.33 Option L 0.135 3.43 Table A C CRYSTEK CORPORATION Pad Connection 1 2 3 4 N/C GND Output Vdd Rev: P Date: 10-Jul-2015 Page 2 of 4 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt Available Frequencies (MHz): 245.760 800.000 250.000 916.000 433.920 1000.000 500.000 1090.000 622.080 Custom Frequencies Available with NRE Fee Crystek Part Number Guide CCSO - 914X 3 L - 315.500 #1 #2 #3 #4 #5 #1 Crystek Saw Osc. #2 Model 914 with -40/85°C Temperature Range #3 (3 = 3.3Volts) (Blank = 5 Volts) #4 Height (L = 0.135") (Blank = 0.210") #5 Frequency in MHz: 3 or 6 decimal places Frequency vs Temperature Similar Product in 5×7.5mm Package Click Here RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE Ramp-Up 3°C/Sec Max. 260°C Critical Temperature Zone Ramp-Down 6°C/Sec. 217°C 200°C 150°C Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Parameter C Conditions Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Vibration MIL-STD-883, Method 2007, Condition A Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition I or J Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 CRYSTEK CORPORATION Rev: P Date: 10-Jul-2015 Page 3 of 4 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt CCSO-914X3-433.920 -15 Bc 3d z /H K STE 4X Y R C O-91 z CCS 920 MH 433. CCSO-914X-245.760 Rev: P Date: 10-Jul-2015 Page 4 of 4 C CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com