CCO-983/985 Model 9×14 mm SMD, 3.3V/5V, SineWave Frequency Range: 50 MHz to 500 MHz Temperature Range: (Option X) Storage: ±25ppm, 0°C to 70°C ±50ppm, -40°C to 85°C -45°C to 90°C Input Voltage: 3.3V ±0.3V 5.0V ±0.5V 30mA Max @ 3.3V 50mA Max @ 5.0V Input Current: Output: Output Power: Start-up time: Load True SineWave 0 dBm Min 2ms Typical, 10ms Max 50 Ω 2nd Harmonic: Sub-Harmonics: (50 MHz ~ 170 MHz) (171 MHz ~ 500 MHz) -20 dBc Max Period Jitter: Phase Jitter: (20,000 periods) 12 kHz~20 MHz 50 kHz~80 MHz Phase Noise Typ.: (@311.04 MHz) Aging: 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz None -40 dBc Typical, -35 dBc Max <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max -50 dBc/Hz -80 dBc/Hz -110 dBc/Hz -135 dBc/Hz -145 dBc/Hz <3ppm 1st year, <2ppm every year thereafter Applications: 10 Gigabit Ethernet OC48: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & HFF crystal technology to provide a Low Noise, Low Jitter Crystal Oscillator with True Sinewave Output. Specifications subject to change without notice. CRYSTEK CORPORATION TD-041205 Rev. J Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com 0.560 (14.2) CCO-983/985 Model 9×14 mm SMD, 3.3V/5V, SineWave CRYSTEK Part Number Frequency Date Code 0.360 (9.14) Crystek Part Number Guide 0.040 (1.01) 1 4 CCO-983 X-500.000 #1 #2 #3 2 0.070 (1.77) 3 0.200 (5.08) #4 0.560 (14.2) SUGGESTED PAD LAYOUT 0.050 (1.27) 0.210 (5.3) #1 Crystek 9×14 SMD SineWave Oscillator #2 Model 983 = 983=3.3V 985=5.0V #3 Temp. Range: Blank = 0/70°C, X=-40/85°C #4 Frequency in MHz: 3 or 6 decimal places 0.090 (2.28) Example: CCO-983X-500.000 = 3.3V, -40/85°C, 500.000 MHz Pad Connection 1 2 3 4 N/C GND OUT Vdd 0.280 (7.11) 0.200 (5.08) Standard Frequencies MHz 167.3317 212.5000 250.0000 311.0400 RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE 77.7600 155.5200 156.2500 161.1328 166.6286 260°C Ramp-Up 3°C/Sec Max. 217°C Critical Temperature Zone Ramp-Down 6°C/Sec. 200°C 150°C Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape Specifications subject to change without notice. CRYSTEK CORPORATION TD-041205 Rev. J Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com