NetSOLO® Classic Intelligent, Networked, Multi-Channel and Bulk Amplification Voice Evacuation System Description NetSOLO® Classic is a revolutionary advance in emergency voice evacuation system design. NetSOLO Classic employs the proven technology of the 7100 Series fire alarm control panel and expands it to accomplish emergency bulk amplified voice evacuation, two-way fire fighter communications, and building control application. It is a true peer-to-peer, token passing, networked system capable of supporting up to sixty-four (64), individual nodes. All system status, control-by-event sequences, audio voice paging, and fire fighter telephone communications are sent between nodes over a fiber-optic cable or single pair of wires. Each NetSOLO Classic node can be spaced along the network a maximum distance of 3000 feet (914.4 m) over an unshielded, twisted pair of wires or up to an 8 dB loss using fiber-optic cable. Built-in isolation at each node permits Style 4, Style 6, and Style 7 network configurations. NetSOLO Classic is simple to configure for any project requirement. A complete NetSOLO Classic application an be be assembled from just two types of nodes; the 7100 NetSOLO and the INCC-C Command Center plus bulk amplification components. sequences of operations. The NetSOLO Classic Field Configuration Program is based on Boolean logic statements providing AND, OR, NOT, and XOR logic operators. These can be combined to produce additional Boolean operators such as NAND, NOR, XNOR, etc. A comprehensive set of timing functions can also be attached to any input/ output logic statement for staggered reset of fan control relays, time-delayed alarm activation, time-delayed alarm activation, automatic system silence, etc. NetSOLO Classic Features • All communication signals and control-by-event sequences over fiber-optic cable or a single pair of twisted, unshielded wires • Distributed architecture, including Style 7 wiring configurations, allow system components to continue normal operation with no loss of function during single line fault conditions • Network data transfer rate at 625K baud. • Ideal for a wide range of complex system applications including high-rise or campus installations • Integrates 7100 NetSOLO fire alarm control panels and command centers to create a complete audio evacuation system with up to 64 nodes • Each voice gateway center supports up to six (6) ASM16 Addressable Switch Modules for a total of 96 switches which are separately software programmable • Redundant command centers with microphone and fire fighter’s handset easily configured by adding INCC-Cs • State-of-the-art digital signal processor (DSP) technology for efficient audio compression and filtering • Audio channels capable of accommodating up to twenty (20) AA Series amplifiers per channel • Messages easily field-configurable via laptop computer • Advanced Boolean logic-based programming such as AND, OR, NOT, NOR, time delay, and calendar functions configurable via computer programming An ISO 9001-2000 Company SIGNALING NetSOLO® and E3 Series® are registered trademarks of Honeywell FM International Inc. APPROVED S1949 MEA Approved 3022355 217-03-E Vol. II 6911-1703:0118 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0594 Rev. E page 1 of 5 ©2012 by Honeywell International Inc. All rights reserved. 7100 NetSOLO INI-VGE Voice Gateway The 7100 NetSOLO is a micro-processor-based fire alarm control panel with two analog, addressable signaling line circuits (SLC). Each 7100 is equipped with an Intelligent Network Interface module for unshielded, twisted wire (INI7100 UTP) or a combination of wire and fiber-optic cable (INI-7100 FO). Options include an integral Digital Alarm Communicator Transmitter (DACT) supporting most popular reporting formats. Each INI-VGE Voice Gateway controls it’s own audio channel, capable of controlling up to twenty (20) AA Series 100 watt 70.7 VRMS, or 120 watt 25 VRMS audio amplifiers. Intelligent Network Command Center-Classic (INCC-C The Intelligent Network Command Center-Classic (INCCC) serves as the point of interface between an operator and the system’s audio evacuation, fire fighter intercom, and building network. The INCC-C occupies a single address on the NetSOLO Classic network. A typical INCCC assembly consists of an Intelligent Network InterfaceVoice Gateway (INIVGE), and up to six (6) Addressable Switch Modules (ASM-16) or ANU-48 Remote LED Driver Modules. Options include a voice paging microphone and a fire fighter’s intercom handset connecting to the INIVGE. Each INCC-C can support up to six ASM-16 or ANU-48 modules. Each ASM-16 has sixteen push button switches for a maximum capacity of 96 switches per INCC-C command center. Every switch has three associated LEDs, colored green, yellow, and red. These switches and their LEDs are fully programmable to serve any system function desired. They can control audio speaker circuits, notification appliance circuits, addressable relay outputs, fire fighter phone control circuits, or any special application that might be required. Each amplifier has one speaker circuit that can be wired Style Y (Class B) or Style Z (Class A). Each amplifier can produce its own tone or message independently of other system amplifiers. The INI-VGE uses advanced Digital Signal Processing (DSP) technology for audio compression and filtering allowing NetSOLO Classic to produce the clearest audio possible while conserving network bandwidth for instantaneous response. Background noise is automatically filtered during voice paging and fire fighter communications increasing audibility and eliminating the need for push-totalk devices. The INI-VGE can accommodate up to 16 different messages with a total combined duration of three minutes. Each message can be field installed via a laptop computer and can be in the form of a voice message or an evacuation tone. The INI-VGE also provides a fire fighter telephone riser and addressable signaling line circuit connecting to multiple phone jacks or warden stations through as many as sixteen (16) AOM-TELF modules. In addition, each INIVGE SLC can support up to 32 speaker circuits using the AOM-2SF for single channel applications. Multiple INCC-Cs can be configured into the NetSOLO Broadband network to serve as a completely independent command center for their local area or as remote command centers mimicking in part or in whole the function of a main command center. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0594 Rev. E page 2 of 5 www.gamewell-fci.com 7100 NetSOLO with two (2) notification appliance circuits, each rated 1.7.A. 24 VDC, (power-limited) Two (2) signaling line circuits for 394 devices (power-limited) Style 6 (Class A) with optional CAOM Module FIRE Optional integral Digital Alarm Communicator Transmitter (DACT) for local or network-wide event reporting. FIRE FIRE Fiber-optic cable or two wires between nodes. Up to 8 dB loss with fiber-optic, 3,000 ft. (900m) distance with wire. INCC-C Command Center shown with optional microphone and firefighter’s handset, an INI-VGE Voice Gateway, ASM-16 Addressable Switch Modules, each with 16 programmable, addressable switches and three (3) programmable indicating LEDs (red, green, yellow) per switch. Each INI-VGE supports an audio channel. One signaling line circuit with 16 AOM-TEL and 32 AOM-MUX addressable modules (AOM-TELs shown) Style 6 (Class A) standard, power-limited Two wires between INCC-C and bulk amplifier cabinet. Must be in rigid conduit not to exceed 20 feet. Each amplifier provides a speaker appliance circuit rated 100 watts @ 70.7 VRMS, non power-limited, or 120 watts @ 25 VRMS, power-limited. Bulk Amplifier Cabinet Figure 1 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9020-0594 Rev. E page 3 of 5 NODE 7 NODE 6 INX 7100 Local Annunciators LCD -7100, LDM-7100 (m ax. 5) Global display for all network events if set to Region “ 0” One SLC (16 AOM-TELFs & 32 AOM-MUXFs) FIRE One phone riser NAC NAC FIRE Initiating C ontrol D evices Typical for SLC N o . 2 if used 6 Speaker appliance ckts 150 watts max @ 25 V RMS w / 50 watts standby NODE 8 3,000 ft. (max.) between nodes using wire 8 Db loss (max.) between nodes using fiber-optic cable. NODE 4 FIRE NAC NAC FIRE One SLC (16 AOM-TELFs & 32 AOM-MUXFs) INX 7100 NODE 5 Initiating C ontrol D evices Typical for SLC N o . 2 if used One phone riser 6 Speaker appliance ckts 150 watts max @ 25 V RMS w / 50 watts standby C onnect if wired C lass A , Style 6 or 7 only Optional Integral D A C T NODE 3 FIRE Initiating Control Devices Typical for SLC No. 2 if used One SLC (16 AOM-TELFs & 32 A OM-MUXFs) INX 7100 NODE 1 Local annunciators LCD -7100 , LDM-7100 (Max. 5) Global display for all network events if set to Region “0” One phone riser 6 Speaker appliance ckts 150 watts max @ 25 V RMS w / 50 watts standby NODE 2 Figure 2 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0594 Rev. E page 4 of 5 www.gamewell-fci.com Ordering Information Ordering Information (Continued) Part Number BK-7100-2 Description Part Number INCC-C Intelligent Network Command Center - Classic INI-VGE Classic enabled voice gateway INI-VGE-UTP Classic enabled voice gateway, unshield, twisted-pair ASM-16 Programmable switch modules (occupies one single slot of inner door) INCC-IDT Inner door with one double slot for INCC-TEL handset and 4 single slots INCC-ID Inner door with 6 single slots INCC-CAB INCC backbox (black) with black outer door Dimensions: (19” H x 19” W x 4” D) INCC-CABR INCC backbox (black) with red outer door Dimensions: (19” H x 19” W x 4” D) Description Basic system kit, 2 SLC (BSM, keypad display, transformer) BK-7100-2D Basic system kit, w/DACT, 2 SLC BK-7100-2-240V Basic system kit, 2 SLC, 240 VAC BK-7100-2D-240D Basic system kit w/ DACT, 2 SLC, 240 VAC Cabinets 7100-ENC-P Dimensions: Enclosure with plastic door, standard (16.9” H x 14.4” W x 3” D) 7100-ENC-M Dimensions: Enclosure with metal door, standard (16.9” H x 14.4” W x 3” D) NS7100B Dimensions: Enclosure, NetSOLO, black, (19” H x 19” W x 4” D) NS7100R Dimensions: Enclosure, NetSOLO, red, (19” H x 19” W x 4” D) Optional Accessories LCD-7100 LDM-7100 CAOM MCOM PTRM INI-7100-UTP INI-7100-FO Remote serial annunciator (80 character) Remote LED driver module Class A Option combination module w/ disconnect switches For both signaling line circuits and notification appliance circuits Municipal connection option module for local energy city box, Reverse polarity signaling or releasing solenoid Printer transient module Intelligent network interface module unshielded, twisted-pair Intelligent network interface module fiber-optic. Replacement Parts EN-7100 CS-7100 CS-7100M T-7100 T-7100-240 BSM-2 BSM-2D Enclosure (replacement) Plastic door (replacement) Metal door (replacement) Transformer, 120 VAC input (replacement) Transformer, 240 VAC input (replacement) Basic system module, 2 SLC (replacement) Basic system module, 2 SLC w/DACT (replacement) Optional Accessories INCC-TEL Fire fighter telephone handset (requires INCC-IDT inner door) INCC-MIC Paging microphone module (occupies one single slot of inner door) INCC-BP Command center blank face plate (occupies one single slot of inner door) ANU-48 Remote LED driver module (occupies one single slot of inner door) Bulk Amplification AA-100 Audio amplifier, 100W @70.7 VRMS w/ built-in tone generator, 120 VAC AA-120 Audio amplifier, 120W @25 VRMS w/ built-in tone generator, 120 VAC ACT-1 Audio coupling transformer, for audio systems w/multiple supplies FCI-DR-C4B Blank door, lock & keys, for backbox accepting 3 chassis, black FCI-DR-C4BR Blank door, lock & keys, for backbox accepting 3 chassis, red FCI-DR-D4B Blank door, lock & keys, for backbox accepting 4 chassis, black FCI-DR-D4BR SBB-C4 SBB-D4 Blank door, lock & keys, for backbox accepting 4 chassis, red Backbox, 3 chassis, black Backbox, 4 chassis, black Optional Accessories FCI-CHG-120 Battery charger, 25-120 A/H sealed lead-acid, mounts in FCI-LBB box FCI-LBB Battery box, accommodates batteries up to 55 A/H, black GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9020-0594 Rev. E page 5 of 5