NetSOLO® Broadband Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System Description The NetSOLO® Broadband is a revolutionary advance in fire detection and emergency voice evacuation system design. NetSOLO® Broadband employs the proven technology of the 7100 Series fire alarm control panel and expands it to accomplish emergency multi-channel voice evacuation. It is a true peer-to-peer, token passing, networked system capable of supporting up to sixty-four (64) individual nodes. All systems status, control-by-event sequences, audio voice paging, and fire fighter telephone signals are sent between the nodes over just a single pair of wires or fiberoptic cable. Each NetSOLO Broadband node can be spaced along the network a maximum distance of 3,000 feet (914.4 m) over an unshielded twisted-pair of wires or up to an 8dB loss using fiber-optic cable. Built-in isolation at each node permits Style 4, 6, and 7 network configurations. NetSOLO Broadband is capable of the most sophisticated sequences of operations. The Field Configuration Program (FCP-NetSOLO) is based on Boolean logic statements providing AND, OR, NOT, and XOR logic operators. These operators can be combined to produce additional Boolean operators such as NAND, NOR, XNOR, etc. A comprehensive set of timing functions can also be attached to any input/output logic statement for staggered reset of fan control relays, time-delayed alarm activation, automatic system silence, etc. The 7100 NetSOLO is a microprocessor-based fire alarm control panel with two (2), analog, addressable signaling line circuits (SLC). Each 7100 is equipped with an Intelligent Network Interface Module for unshielded, twisted-wire and fiber-optic cable (INI-7100 FO). Options include an integral Digital Alarm Communicator Transmitter (DACT) supporting the most popular reporting formats. NetSOLO Broadband Features • IBC Seismic Certified • All communication signals and control-by-event sequences transmit over a single pair of twisted, unshielded wires or fiber-optic cable • Distributed Architecture, including Style 7 wiring configurations, allow system components to continue normal operation with no loss of function during single line fault conditions • Network data transfer rate at 625K baud • Ideal for a wide range of complex system applications including high-rise or campus installations • Integrates 7100 NetSOLO Series fire alarm control panels, INX transponders and INCC command centers to create a complete audio evacuation system with up to sixty-four (64) nodes • Each INCC supports up to sixteen (16), ASM-16 addressable switch modules for a total of 256 switches in which the software can be programmed separately • Graphic Network Annunciator (NGA) (optional) • Remote 48 LED Driver Module (ANU-48) (optional) • Redundant command centers with microphone and firefighter’s handset easily configured by adding INCCs An ISO 9001-2000 Company SIGNALING MEA City of City of Approved Denver Chicago FDNY: APPROVED Approved Approved 1 S1869 3025415 COA # 6077 6911-1703:0116 Class Class2 FM NetSOLO® and E3 Series® are registered trademarks of Honeywell International Inc. High Rise GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0551 Rev. G page 1 of 5 ©2012 by Honeywell International Inc. All rights reserved. Features (Continued) • State-of-the-art digital signal processor (DSP) technology for efficient audio compression and filtering • Software-programmable, multi-channel digital audio applications • Up to 150 watts of audio power (three (3), AM-50 Series amplifier modules) with an additional 50 watts of standby power in each intelligent network transponder (INX CAB-B) cabinet) • Each AM-50 Series amplifier module provides two (2), individually activated speaker circuits supplying 50 watts total of power • Sixteen (16) message capacity with up to 3 minute duration per INX • Messages easily field-configurable with a laptop computer • Advanced Boolean Logic-based programming such as AND, OR, NOT, NOR, time delay, and calendar functions configurable through computer programming Description (Continued) The Intelligent Network Command Center (INCC) serves as the point of interface between an operator and the system’s audio evacuation, fire fighter intercom and building network. The INCC occupies a single address on the NetSOLO Broadband network. A typical INCC assembly consists of the following: • An Intelligent Network Interface-Voice Gateway (INIVG) module (fiber-optic or unshielded twisted-pair). • INI-VGC-UTP (unshielded twisted-pair only). • One or more Addressable Switch Modules (ASM-16). • Optional Graphic Annunciator (NGA). • Remote 48 LED Driver Module (ANU-48). The Intelligent Network Transponder (INX) acts as a network audio transponder for the NetSOLO Broadband Network. The INX transponder serves as the point of distribution for the system’s audio and fire fighter telephone circuits and occupies a single node along the NetSOLO network. A typical INX assembly consists of the following: • an Intelligent Network Interface-Voice Gateway (INI-VGX) module • a PM-9/PM-9G power supply • up to four (4), AM-50 Series amplifiers The INX transponder occupies a single address on the network and provides termination points for the network connection using either a pair of twisted, unshielded wire (12 AWG max.) or fiber-optic cable. The INI-VGX uses advanced Digital Signal Processing (DSP) technology for audio compression and filtering that allows the NetSOLO Broadband to produce the clearest audio possible while conserving the network bandwidth for an instantaneous response. During voice paging and fire fighter communication, background noise is automatically filtered. This feature allows increased audibility and eliminates the need for push-to-talk devices. The INI-VGX can accommodate up to sixteen (16) different messages with a total combined duration of three minutes. Each message can be installed in the field using a laptop computer. Available message options are voice messaging or evacuation tone. The INI-VGX also provides a fire fighter phone riser and addressable signal line circuit that connects to multiple phone jacks or warden stations through as many as sixteen (16), AOM-TELF modules. In addition, the INI-VGX SLC can support up to thirty-two (32), speaker circuits using the AOM-2SF for single channel applications. Options include a voice paging microphone and a fire fighter’s handset connecting to the INI-VGC. Each INCC can support up to sixteen (16), ASM-16 modules. Each ASM-16 has sixteen (16), push button switches for a maximum capacity of 256 switches per INCC command center. Each switch has three (3), associated LEDs, colored green, yellow, and red. These switches and their LEDs are fully programmable to serve any system function desired. They can control audio speaker circuits, notification appliance circuits, addressable relay outputs, fire fighter phone control circuits. Switches may also be customized for any special application that might be required. two (2), separate speaker circuits that can be wired Style Y (Class B) or Style Z (Class A). In addition, each amplifier can broadcast its own tone or message independently of other system amplifiers. Thus, an INX transponder can produce three (3), audio channels simultaneously. Each INX transponder can support up to four (4), AM-50 Series amplifiers operating as main amplifiers with one (1), AM-50 Series amplifier used as a fail-safe backup amplifier. Multiple INCCs can be configured into the NetSOLO Broadband network to serve as a completely independent command center for their local area or serve as remote command centers mimicking in part or in whole the function of a main command center. The INX transponder receives its power from a PM-9/PM9G nine ampere, filtered, switching power supply providing 24 VDC nominal operating voltage. The PM-9/PM-9G has an integral standby battery charger capable of recharging up to 55 A/H batteries. The INX can house up to 12 A/H sized batteries. The INX CAB-B can contain up to four (4), AM-50 Series amplifiers that produce 50 watts of power @ either 25 VRMS or 70.7 VRMS audio output. Each amplifier includes GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0551 Rev. G page 2 of 5 www.gamewell-fci.com Figure 1 NetSOLO Broadband GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9020-0551 Rev. G page 3 of 5 NODE 6 NODE 7 INX 7100 Local Annunciators LCD-7100, LDM-7100 (max. 5) Global display for all network events if set to Region “0” One SLC (16 AOM-TELFs & 32 AOM-2SFs) FIRE NAC NAC One phone riser Initiating Control Devices Typical for SLC No. 2 if used FIRE 6 Speaker appliance ckts 150 watts max w/50 watts standby NODE 8 3,000 ft. (max.) between nodes using wire 8 Db loss (max.) between nodes using fiber-optic cable FIRE NAC NAC FIRE One SLC (16 AOM-TELFs & 32 AOM-2SFs) INX NODE 4 7100 NODE 5 Initiating Control Devices Typical for SLC No. 2 if used One phone riser 6 Speaker appliance ckts 150 watts max w/50 watts standby Connect if wired Class A, Style 6 or 7 only Optional Integral DACT FIRE NODE 3 Initiating Control Devices Typical for SLC No. 2 if used One SLC (16 AOM-TELFs & 32 AOM-2SFs) INX 7100 NODE 1 Local annunciators, LCD-7100, LDM-7100 (Max. 5) One phone riser Global display for all network events if set to Region “0” 6 Speaker appliance ckts 150 watts max w/50 watts standby NODE 2 Figure 2 Node Connections GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0551 Rev. G page 4 of 5 www.gamewell-fci.com Specifications Ordering Information (Continued) Detailed product specifications may be found in: 9020-0542 INCC Intelligent Network Command Center Data Sheet 9020-0531 NetSOLO Data Sheet 9020-0541 INX Intelligent Network Transponder Data Sheet Part Number Ordering Information INCC-BP INCC Intelligent Network Command Center INX Intelligent Network Transponder Part Number INI-VGC INI-VGC-UTP ASM-16 NGA ANU-48 INCC-IDT INCC-ID INCC-CABR Dimensions: Description Optional Accessories ANU-48 INCC-TEL INCC-MIC Description Command Center Voice Gateway Voice Gateway for unshielded twisted-pair wire only Programmable Switch Module (occupies single slot of inner door) Network Graphic Annunciator Remote LED Driver Inner door w/one double slot for INCC-TEL fire fighter handset and 4 single slots Inner door w/6 single slots INCC backbox (black) with red outer door 19” W x 19” H x 4” D (48 W x 48 H x 10 D cm) Remote LED Driver Fire Fighter Telephone Handset (requires INCC-IDT Inner Door) Paging Microphone Module (occupies one single slot of Inner Door) Command Center Blank Face Plate (occupies one single slot of Inner Door) INX-VGX Transponder Voice Gateway PM-9/PM-9G INX 9 ampere Power Supply AM 50 Series Amplifiers: AM-50-25 INX 50 Watt amplifier @ 25 VRMS output AM-50-70 INX 50 Watt amplifier @ 70.7VRMS output Cabinets: INX-CAB INX Backbox with Black Door Dimensions: 19” W x 19” H x 4” D (48 W x 48 H x 10 D cm) INX-CABR INX Backbox with Red Door Dimensions: 19” W x 19” H x 4” D (48 W x 48 H x 10 D cm) INX CAB-B Enclosure louvered door and INX-CAB-B Mounting Plate Dimensions: 19 3/8” W x 19 3/8” H x 4.5” D (49 W x 49 H x 11 D cm) For additional information on the cabinets, refer to the E3 Series® Cabinets data sheet (Part Number: 9020-0649). Seismic Battery Bracket Kits Part Number 90518 Description NetSOLO NS-INX 7 A/H Seismic Battery Bracket Kit NetSOLO 7100 7 A/H Seismic Battery Bracket Kit 90519 NetSOLO NS-INX 12 A/H Seismic Battery Bracket Kit For additional information on the Seismic Battery Brackets, refer to the following documents: • Seismic Battery Bracket Installation Guide, P/N: 53839 • E3 Series Cabinets Data Sheet, P/N: 9020-0649 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9020-0551 Rev. G page 5 of 5