E3 Series® Classic E3 Series Classic Description The E3 Series® Classic Emergency Voice Evacuation System is a combination of the E3 Series® Expandable Emergency Evacuation System and the NetSOLO® Classic System. The E3 Series Classic uses the latest generation of fire alarm control panel sub-assemblies that include the Intelligent Loop Interface-Main Board (ILI-MB-E3/ILI95MB-E3), Addressable Node Expander (ANX), Repeater (RPT-E3), and the Power Supply (PM-9/PM-9G). The E3 Series Classic draws on 100 or 120 watt amplifiers for powerful, bulk amplification that can be used in a variety of large-scale facilities such as industrial, university, or highrise complexes. The E3 Series Classic is a peer-to-peer, self-regenerating token ring passing network consisting of up to (64) nodes. In addition, the Addressable Node Expander (ANX) board expands the network to (122) nodes. The E3 Series Classic System is a modular design. This design allows a wide range of configurations from three basic assemblies to form an integrated, distributed fire alarm system with bulk audio evacuation and fire command capability. The E3 Series Classic System can have multiple command centers. Each command center can occupy one node on the network. These multiple command centers can either serve as a remote command centers duplicating the functions of a main command center or operate as an independent command center for each location in a large-scale facility. A node may consist of an Intelligent Network Command Center (INCC-C) comprised of Intelligent Network Interface-Voice Gateways (INI-VGE), fully programmable Addressable Switch (ASM-16) sub-assemblies, a microphone for paging, and a telephone handset for fire fighter communications. The E3 Series Classic includes the following components: • Intelligent Network Interface-Voice Gateway (INI-VGE-FO or INI-VGE-UTP) • Addressable Switch Sub-Assembly (ASM-16) • Amplifier-100 watt (AA-100) or Amplifier-120 watt (AA-120) • Remote LED Driver (ANU-48) • ILI-E3 and ILI95-E3 Series loop modules E3 Series Classic Features • IBC Seismic Certified. • Listed under UL® Standard 864, 9th Edition. • UL® Listed for smoke control (dedicated and non-dedicated) when properly configured. • FM/UL® Listed for Pre-action/Deluge use. • Provides up to (20), (100) or (120) watt amplifiers per INI-VGE sub-assembly. • Accommodates up to (122) nodes. • Network communications convey all fire alarm communication over unshielded, twisted-pair or fiber-optic cable. • Wires can extend up to 3,000 feet (8890 cm) between each node while the fiber-optic cable can tolerate up to 8 dB loss between each node. SIGNALING FM ® MEA Approved City of Chicago City of Denver FDNY #: 6175 Approved Approved 1 S1869 3025415 COA # 231-06-E 7165-1703:125 Class Class 2 ® APPROVED E3 Series and NetSOLO are registered trademarks of Honeywell International Inc. UL® is a registered trademark of Underwriters Laboratories Inc. High Rise GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0641 Rev. K page 1 of 2 ©2014 by Honeywell International Inc. All rights reserved. Installation Ordering Information (Continued) An array of cabinets allows for neat, compact, attractive installations. There are several cabinet options available in the E3 Series Classic System. Note: the INCC Inner Door is used to install the ASM-16/ ANU-48 sub-assemblies and microphone. INCC-C Intelligent Network Command Center Classic Part Number INCC-IDT The E3 Series Classic System offers the following enclosure: • Amplifier Enclosure (CAB-B3, CAB-D3) that houses the AA-100 and AA-120 amplifiers. The enclosures are available in three (C3) or four D3 tiers, with one amplifier occupying one tier. For additional information on the cabinets, refer to the E3 Series Cabinets data sheet (Part Number: 9020-0649). E3 Series Classic ILI-MB-E3 ILI-S-E3 ILI95-MB-E3 ILI95-S-E3 ANX-SR ANX-MR-FO ANX-MR-UTP LCD-E3 RPT-E3 PM-9/PM-9G Part Number INI-VGE INI-VGE-UTP ASM-16 Fire fighter telephone handset (requires INCC-IDT inner door) Paging microphone module (occupies 1 slot on inner door) Command center blank face plate (occupies 1 slot on inner door) Remote LED driver module (occupies 1 slot on inner door) Bulk Amplification AA-100 Description Expandable Emergency Evacuation System E3 Series Classic Intelligent Loop Interface-Main Board Intelligent Loop InterfaceExpansion Board Intelligent Loop Interface-Main Board Intelligent Loop InterfaceExpansion Board Addressable Node ExpanderSingle Ring Addressable Node Expander Multi-Ring Fiber Optic Addressable Node Expander Multi-Ring Unshielded Twisted-Pair LCD Keypad Display Repeater Module Power Supply Module Description Classic enabled voice gateway Classic enabled voice gateway, unshielded, twisted-pair Programmable switch modules (occupies one slot of inner door) INCC-TEL ANU-48 32°-120° F (0°-49° C) 0 to 93% non-condensing at 90° F (32° C) INCC-C Intelligent Network Command Center - Classic Optional INCC Accessories INCC-BP 24 VDC Ordering Information Part Number E3 Series Dimensions: INCC-MIC Specifications: Operating Voltage: Operating Temperature: Relative Humidity: INCC-ID INCC-CABR Description Inner door with one double slot for INCC-TEL handset & 4 slots Inner door with 6 slots INCC backbox (black) with red outer door (19” H x 19” W x 4” D) (48 H x 48 W x 10 D cm) AA-120 ACT-1 FCI-DR-C4B FCI-DR-C4BR FCI-DR-D4B FCI-DR-D4BR SBB-C4 SBB-D4 Audio Amplifier, 100W @70.7 VRMS w/built-in tone generator, 120 VAC Audio Amplifier, 120W @25 VRMS w/built-in tone generator, 120 VAC Audio coupling transformer, for audio systems w/multiple supplies Blank door, lock & keys, for backbox accepting 3 chassis, (Black) Blank door, lock & keys, backbox accepting 3 chassis, (Red) Blank door, lock & keys, for backbox accepting 4 chassis, (Black) Blank door, lock & keys, backbox accepting 4 chassis, (Red) Backbox, 3 chassis, (Black) Backbox, 4 chassis, (Black) Optional Amplifier Accessories FCI-CHG-120 FCI-LBB Battery charger, 25-120 A/H sealed lead-acid, mounts in FCI-LBB box Battery box, accommodates batteries up to 55 A/H, black Seismic Battery Bracket Kits For information on the types of Seismic Battery Bracket Kits that are available and the Seismic Battery Bracket Kit Part Numbers and the installation instructions, refer to the following documents: • Seismic Battery Bracket Installation Guide, P/N: 53839 • E3 Series Cabinets Data Sheets, P/N: 9020-0649 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0641 Rev. K page 2 of 2 www.gamewell-fci.com