IdentiFlex 100 Single Loop Addressable Fire Alarm Control Panel Description The IdentiFlex 100 is a 25 point, single loop, addressable fire alarm control panel that supports Gamewell-FCI, Velociti Series detectors and modules. The IdentiFlex 100 also features a powerful built-in, dual line fire communicator that offers communication for reporting of all system activity to a remote monitoring location. The IdentiFlex 100 provides you with the revolutionary value and performance of the addressable sensing technology combined with an exclusive, built-in digital communication that includes an easy-to-use interface. With the code wheel addressable detectors/modules and the JumpStart™ feature, the IdentiFlex 100 can be Life Safety operational without a single programming tool. Powerful features such as drift compensation and maintenance alert are delivered in this robust FACP from Gamewell-FCI. Installation The IdentiFlex 100 is a surface mount FACP. Compatibility The IdentiFlex 100 SLC supports the Velociti Series intelligent detectors and modules. Approvals The following list the NFPA Standard Approvals for the devices listed below: NFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72: • Central Station • Auxiliary Protected Premises Unit • Remote Signalling • Local Protective Signaling Systems The above devices are suitable for automatic, manual, waterflow, sprinkler supervisory (DACT non-coded), signalling services. IdentiFlex Features • Built-in support for a combination of up to 25 detectors and modules. • Built-in digital communicator. • Detectors and modules are code wheel addressed for a faster installation time. • Offers drift compensation. • Maintenance alert region. • Point status eliminates calibrated smoke test requirements for NFPA 72. • Auto learn “JumpStart™” feature for easy programming. • Custom programming can be performed through an FACP built-in browser. No programming software required. • Uses standard wire–no shielded or twisted-pair required.Central Station reporting up to five zones • Built-in synchronization for AMSECO, Gentex®, Cooper-Wheelock®, or System Sensor® notification appliances. • Two Style Y (Class B) notification appliance circuits (NAC). • Two built-in Form C programmable relays. • Built-in Form C trouble relay. • Provides SBUS for a connection to an optional GFANN-80 remote LCD annunciator. ISO 9001-2000 Company JumpStart™ is a trademark of Honeywell International Inc. System Sensor is a registered trademark of Honeywell International Inc. ® Gentex is a registered trademark of Gentex. ® Cooper-Wheelock is a registered trademark of Cooper-Wheelock Inc. ® UL is a registered trademark of Underwriters Laboratories Inc. SIGNALING S1869 7165-1703:0172 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60579 Rev. C page 1 of 2 ©2013 by Honeywell International Inc. All rights reserved. GFANN-80 Remote Annunciator Signaling Line Circuit DNR duct detector AOM-2RF ASD-PL2F MS-7AF AMM-2F ATD-L2F Horn/ Strobe Strobe BELL M500X Notification Appliance Circuit Figure 1 IdentiFlex 100 Addressable FACP Overview Ordering Information Specifications Electrical GIF100 Primary AC: GIF100G Primary AC: Total Accessory Load: Notification Power: Standby Current: Alarm Current: Aux Power Circuits: Battery Charging Capacity: Battery Size: 120 VRMS @ 60 Hz,1.5A 230 VRMS @ 50/60, .75A Hz 2.0A @ 24 VDC 2.0A @ 24 VDC, power-limited 135 mA 220 mA 1.0A @ 24 VDC per circuit, power-limited 7.0 – 33 AH or 18 AH for ULC® installations 7 AH max. allowed in FACP cabinet. Larger capacity batteries can be housed in an accessory cabinet. Physical Dimensions: Weight: Color: Telephone Requirements: Type of Jack: 12.75" W x 15.2" H x 3.4" D (32.39 W x 38.42 H x 8.57 D cm) 11.5 lbs. (5.2 kg) Red FCC Part 15 and Part 68 approved RJ31X (two required) Part Number GIF100 GIF100G Description IdentiFlex 100, 120 VAC FACP IdentiFlex 100, 230 VAC FACP Gamewell-FCI Fire Systems Devices ASD-PL2F Photoelectric smoke detector ASD-PTL2F Photoelectric smoke detector with thermal DNR Photoelectric duct smoke detector Photoelectric smoke detector, remote test capable, for use with the ASD-PL2FR duct smoke detectors ATD-L2F Fixed temperature thermal detector AMM-2F Mini monitor Module AOM-2RF Addressable relay module MS-7ASF Addressable single action pull station MS-7AF Addressable dual action pull station IdentiFlex fire alarm control panel GFANN-80 Remote Annunciator 005220 City box connection module HFS-P Photoelectric smoke detector HFS-PT Photoelectric smoke detector with thermal HFS-D Photoelectric duct smoke detector HFS-DPR Photoelectric smoke detector, remote test capable, for use with the HFS-D duct smoke detectors HFS-T Fixed temperature thermal detector HFS-MM Mini monitor module HFS-MR Addressable relay module GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9021-60579 Rev. C page 2 of 2 www.gamewell-fci.com