Versatile CAN-Based Display The Series 3D50 5-inch Touchscreen Display for off-highway vehicles. •Intuitive touch technology to select objects and swipe through screens. •Advanced sensor technology recognizes bare and gloved fingers, even when the display surface is wet. •Easy application creation and integration with VUI Builder to create custom screens. •Scratch resistant/anti-glare cover glass is optically bonded to LCD display for superior mechanical and visual performance. •Bright, backlit display provides high contrast text and full color graphics for excellent sunlight readability. •Convenient flush mounting provides modern look and feel, to seamlessly blend with vehicle cab design. •Armrest, A-post, and dashboard mounting. •Rugged design for extreme environments. Functions as an engine monitor or input device. www.grayhill.com Construction Agriculture Versatile Display. Many Features. Flexible. Series 3D50 is available with or without a projected capacitance touch screen. This advanced touchscreen works even when wet or when the user is wearing gloves. Adaptable. Designed for integration into off-highway vehicles. It functions in 12V/24V operation, boots in 3 seconds and is sealed against the ingress of liquids and dust. Bright. This 5.0-inch backlit WVGA LCD (800x480) is very bright (700 nits) providing good daylight readability. It has software controlled LED backlighting and 16 bit color. Rugged. The protective cover lens is scratch resistant glass, not plastic. Optical bonding of the cover glass improves impact resistance. Powerful. The powerful embedded computer can monitor and display many events and camera images simultaneously: - 800MH - 512MB RAM - 4GB storage - USB 2.0 Useful. Ideal for agriculture and construction vehicle applications, including virtual gauges, diagnostic menus, engine monitor, operator input, fault indicators and service reminders. Adjustable. There are many system interface options: - Up to two CAN-bus ports - Up to two NTSC/PAL camera input ports - Up to four digital inputs - Up to four digital outputs - One USB 2.0 port - Touchscreen Readable. Optically bonding the display, touch sensor and cover glass reduces reflections. An anti-glare coating further improves readability in bright sunlight. Easy to Program. Our VUI Builder pc-based configuration tool makes application programming fast and easy. Drag and drop graphics, bitmaps, text with the click of a mouse. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 6 0 5 2 5 - 5 9 9 7 • U S A • P h o n e : 7 0 8 - 3 5 4 - 1 0 4 0 • F a x : 7 0 8 - 3 5 4 - 2 8 2 0 • w w w. g r a y h i l l . c o m Versatile Display. All the Specifications. Display: 5"/127 mm color transmissive TFT LCD USB: 2.0 host (full speed) Resolution: WVGA, 800 x 480 pixels, 16 bit color Real Time Clock: Internal non-rechargeable battery backup Aspect ratio: 16:9 CAN: (2) CAN 2.0 B J1939 protocol Orientation: Landscape or Portrait with optional viewing angle RS232: full duplex Backlighting: LED, 700 cd/m2 or nits Video Input: 2 NTSC/PAL Microprocessor: Freescale™ i.mx6, 800 mHz Inputs: (4) 0-12 VDC discrete digital; 2 Hz to 1kHz Flash Memory: 4Gb eMMC Outputs: (4) digital 500 mA switched low side RAM: 512 MB DDR3 MECHANICAL PERFORMANCE POWER SPECIFICATIONS Operating Voltage 8VDC to 32VDC reverse polarity and load dump Power Consumption 5 Watts (typical) with full back light Standby Current <1ma ENVIRONMENTAL SPECIFICATIONS Operating temperature ANSI/ASAE EP455 5.1.1 -30°C to +65°C Storage Temperature ANSI/ASAE EP455 5.1.2 -40°C to +85°C Thermal Shock ANSI/ASAE EP455 5.1.3 -40°C to 65°C at a rate of 4°C/min (1 hour at extremes) Altitude (Barometric Pressure) ANSI/ASAE EP455 5.2 101.3kPa to 18.6kPa Sand and Dust SAE J1455 Solar Radiation ISO 4892-2 Method B Wash Down ANSI/ASAE EP455 5.6 Level 2 Humidity ANSI/ASAE EP455 5.13 96% humidity at 35°C for 240 hours Salt Fog ANSI/ASAE EP455 5.9 5% aqueous solution of NaCl @ 35°C and a pH between 6.5 and 7.2 for 48 hours Chemical resistance ISO 16750-5 EP 455 5.8.2 Ingress Protection IP67 front and rear Vibration, Random ANSI/ASAE EP455 5.15.1 2h each axis 50Hz to 2000Hz Vibration, Sinusoidal ANSI/ASAE EP455 5.15.2 A logarithmic sweep from 10Hz to 2000Hz to 10Hz over a period of 20 minutes for 4 hours in each axis Shock ANSI/ASAE EP455 5.14 11ms half sine pulse of 490 m/s2 in 3 axis Drop ANSI/ASAE EP455 5.14.2 Level 1 400 mm onto a hardwood benchtop on all practical edges. CE COMPLIANCE EMC EN 13309:2010 ESA ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS ESD ANSI/ASAE EP455 5.12 Level 1 +/- 25KV Radiated Immunity EP455 5.16 Level 1 Conducted emissions CISPR25 Level 3 Radiated emissions ISO14982 with mating connector installed ELECTRICAL PERFORMANCE SPECIFICATIONS Maximum load ANSI/ASAE EP455 5.1.1 T(min) = T(max) = +65C Jump start voltage EP455 5.10.2 36V for 60 minutes; -36V for 60 minutes Short circuit protection EP455 5.10.4 36V Reverse polarity protection EP455 5.10.3 -36V Starting profile ISO 16750-2 Level II code C, Level IV code A Battery-less operation ANSI/ASAE EP455 5.11.3 Level 2 Load dump ISO 7637-2 Test Pulse 5a Level 4 Switching spikes ISO 7637-2 Test Pulse 3a and 3b Alternator field decay ANSI/ASAE EP455 5.11.2 VUI Builder Software Tool Easily create custom graphic icons, text boxes and active gauge elements that monitor J1939 CAN-bus parameters with VUI Builder. •Use VUI Builder to develop graphic objects. •Add and edit actions (such as touch and swipe). •Store graphic objects in on-board flash memory. •Recall objects at run time via J1939 commands. •Controlled via J1939 PGNs. •Native coding not required. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 6 0 5 2 5 - 5 9 9 7 • U S A • P h o n e : 7 0 8 - 3 5 4 - 1 0 4 0 • F a x : 7 0 8 - 3 5 4 - 2 8 2 0 • w w w. g r a y h i l l . c o m DIMENSIONS in inches (and mm) 99,3 [3.909] 66,8 [2.630] R7,25 [ .285 ] Recommended Mounting Cut Out RECOMMENDED PANEL MOUNTING GEOMETRY 45,153 [1.778] 42,193 [1.661] 60 [ 2.362 ] R7,75 x4 [ .305 ] AT TOP THREADED FOR M5x0.8 SCREWS, 10.5MM, 4 PLACES MAX SCREW LENGTH = 10MM + PANEL THICKNESS SEE RECOMMENDED PANEL GEOMETRY 27 [1.063] 27 [1.063] 5,5 x4 [ .217 ] 91 REF 28,61 [1.127] 144,5 [5.689] 145,5 [5.728] AT TOP 107,25 [4.222] 110 [4.331] 97,61 [3.843] 91 REF 28 28 [1.102] [1.102] 50,15 [1.974] 100,3 [3.949] AT TOP Weight: 360 grams SECTION X-X REAR CONNECTOR Pin 18 13 12 7 6 1 Pin Function Pin Function Pin Function Pin Function Pin 1 Function VIN Positive 4 Digital In 7 Digital I/O 10 VIDEO1- 13 CAN1 Hi 16 Function CAN2 Low 2 VIN Return 5 Digital Out 8 Digital I/O 11 VIDEO2+ 14 CAN1 Low 17 RS232Tx 3 VIN Switched 6 Digital I/O 9 VIDEO1+ 12 VIDEO2- 15 CAN2 Hi 18 RS232Rx Mating Connector: DEUTSCH DT16-18SA-K004 VERSATILE DISPLAY. ORDER INFORMATION. RS232 USB 2.0 CAN1 3D50XX-100 X X X 3D50VX-100 X X X X X X X 3D50VT-100 X X X X X X X 3D50DEV-BASE 3D50DEV-100 Linux CAN2 VIDEO1 VIDEO2 RTC Touch X DIG IN DIG OUT DIG I/O 0 0 0 1 1 3 1 1 3 Development Kit (does not include display) Custom Options Available • Custom Logo • Icons / screens pre-loaded Development Kit with 3D50VT-100 display Available upon request Your Experts in Cab Controls Grayhill specializes in the design, development and production of human interface controls, including: • Cab user interface design • Customized control panels • CAN-bus interface devices www.grayhill.com Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525 Phone: (708) 354-1040 Fax: (708) 354-2820 Bulletin 1213 Rev 06/15