V i s h ay I n tertec h n o l o g y, I n c . AND TEC I INNOVAT O L OGY PFRR N HN THIN FILM CHIP RESISTORS O 19 62-2012 Resistors - ESA-Qualified Thin Film Chip ESCC ( ) 4001/023 Qualified R Failure Rate High Precision (10 ppm/°C, 0.05 %) Thin Film Chip Resistors Key Benefits • • • • • • ESA qualified R Failure rate SMD chip resistor TCR to 10 ppm (- 55 °C; + 155 °C) Tolerances down to 0.05 % Load life stability: less than 0.25 % at Pn at 70 °C after 2000 hours Resistance range: 100R to 3M01 Resources • Datasheet: PFRR - http://www.vishay.com/doc?53046 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0205-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n tertec h n o l o g y, I n c . AND TEC PFRR O L OGY INNOVAT I THIN FILM CHIP RESISTORS N HN O PFRR 19 62-2012 Vishay Sfernice ESCC ( ) 4001/023 Qualified R Failure Rate ESCC ( ) 4001/023 Qualified Failure High Precision (10 ppm/°C, 0.05R%) Thin Rate Film High ChipPrecision Resistors (10 ppm/°C, 0.05 %) Thin Film Chip Resistors • Load life stability at ± 70 °C for 2000 h: 0.25 % under Pn • Temperature coefficient to: 10 ppm/°C • Very low noise (< 35 dB) and voltage coefficient (< 0.01 ppm/V) • Resistance range: 100 Ω to 3.01 MΩ (depending on size) • Tolerances down to 0.05 % • SnPb terminations over nickel barrier • ESCC 4001 (generic spec) • ESCC 4001/023 (detailed spec) • ESCC qualified • R failure rate (0.01 % per 1000 h) • SMD wraparound chip resistor • Halogen-free according to IEC 61249-2-21 Vishay Sfernice Thin Film division holds ESCC QML qualification (ESCC technology flow qualification). These HiRel components are ideal for low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, VISHAY SFERNICE’s precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y (± 10 ppm/°C). DIMENSIONS A D D B C E E DIMENSIONS in millimeters CASE SIZE A MAX. TOL. + 0.64 MIN. TOL. - 0.13 B MAX. TOL. + 0.26 MIN. TOL. - 0.13 C MAX. TOL. + 0.64 MIN. TOL. - 0.13 D/E MAX. TOL. + 0.13 MIN. TOL. - 0.13 1.52 0.75 0.38 0.38 0603 0805 1.91 1.27 0.38 0.38 1206 3.00 1.60 0.38 0.38 2010 5.08 2.54 0.38 0.58 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PFRR0603Y1003BBT (preferred part number format) P Revision 21-Jan-10 Resistors - ESA-Qualified Thin Film Chip FEATURES F R R 0 TYPE TCR PFRR0603 PFRR0805 PFRR1206 PFRR2010 Y = ± 10 ppm/°C E = ± 25 ppm/°C Document Number: 53046 PRODUCT SHEET Revision: 21-Jan-10 6 0 3 Y OHMIC VALUE The first three digits are significant figures and the last digit specifies the number of zero to follow. Example: 3901 = 3900 Ω 1004 = 1 MΩ 1 0 3 B B T TOLERANCE TERMINATION PACKAGING W = ± 0.05 % B = ± 0.10 % B: SnPb over nickel barrier T: For tape and reel (Leave blank for waffle pack) For technical questions, contact: [email protected] 2/2 0 www.vishay.com VMN-PT0205-1202 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000