Model 1815 Enhanced Accuracy Rotary Torque Sensor DESCRIPTION A line of enhanced accuracy rotary transformer torque sensors Carrier frequency excitation provides increased signal/noise often ideal for test installations running long-term durability test- immunity. Extended speed range allows shaft rotation up to ing. Non-contact nature of the signal transfer virtually eliminates 25000 RPM. Capacity range from 50 in-lb to 10000 in-lb for shaft the need for maintenance. High overload protection with high mounting configurations. signal output helps prevent potential damage to the sensor. FEATURES • 50 in-lb to 10000 in-lb capacity • 0.05 % non-linearity and hysteresis • Spline drive/flange mount • Extended speed range, up to 25000 RPM • Minimal maintenance due to “bearings only” contact Safety considerations: It would be unsafe to operate Honeywell torque sensors and load cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt, consult factory. Honeywell is not responsible for any property damage or personal injury which may result because of the misapplication of the transducer. Model 7927 shunt cal reference box included with each purchase of 1800 Series. Flange housing mount with pads to match Army-Navy mountings standard. Spline drive. Model 1815 PERFORMANCE SPECIFICATIONS TYPICAL SYSTEM DIAGRAM Characteristic Measure Mating Connectors & Cables Torque range 50, 100, 200, 500, 1K, 2K, 5K, 10K lb-in Non-linearity ±0.05 % of rated output Hysteresis ±0.05 % of rated output Repeatability ±0.03 % of rated output Output @ rated capacity 2 mV/V (nominal) 064-LW13621 Mating connector 064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup 7200-81-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal) 7204-00-XX* Speed sensor cable, pigtail leads at instrument 7204-16-XX* Speed sensor cable to instrument 7541 7220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument 7220-119-XX* Zero velocity speed sensor cable to instrument 7541 * XX represents length in feet 100ft maximum ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 °C to 93 °C [-20 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.002 %/of rated output °F Temperature effect, output ±0.002 %/of reading °F Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC Lebow Products MENU VIEW TEST Display Units 7541-111 (Single Channel Display) 7541-112 (Dual Channel Display) 7541-115 (For Torque and Optional Speed Display) MODEL 7541 TARE HOLD ESC RESET Model 7927-108 for connection to 7541 ENTER RUN ELECTRICAL SPECIFICATIONS Characteristic Measure Excitation 3.28 kHz optimum @ 10 Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance 350 ohm (nominal) Number of bridges 1 Zero balance ±1.0 % of rated output 2 Honeywell • Sensing and Control Optional 24368-2 Speed Sensor 22236 Zero Velocity Pickup CAL Model 1815 Enhanced Accuracy Rotary Torque Sensor MECHANICAL SPECIFICATIONS Model Capacity lb-in Capacity N-m Max speed RPM Protected for overloads to Nm [lb-in] 1815A-50 50 5 25000 15 [150] 1815A-100 100 10 25000 30 [300] 1815A-200 200 20 25000 60 [600] 1815A-500 500 55 25000 165 [1500] 1815A-1K 1000 115 25000 165 [1500] 1815K-50 50 5 15000 15 [150] 1815K-100 100 10 15000 30 [300] 1815K-200 200 20 15000 60 [600] 1815K-500 500 55 15000 165 [1500] 1815K-1K 1000 115 15000 330 [3000] 1815K-2K 2000 225 15000 675 [6000] 1815K-5K 5000 565 15000 1695 [15000] 1815K-10K 10000 1130 15000 1695 [15000] Internal and external spline data Model Pressure angle Pitch dia. cm [in] Pitch Number of teeth 1815A 30° 2,03 [0.80] 20/40 16 1815K 30° 3,05 [1.20] 20/40 24 MOUNTING DIMENSIONS Model A B C cm [in] cm [in] cm [in] D cm [in] E F G H cm [in] cm [in] cm [in] cm [in] J cm [in] K L cm [in] cm [in] N P cm [in] cm [in] 1815A 23,55 [9.27] 2,67 [1.05] 1,60 [0.63] 2,84 [1.12] 20,96 [8.25] 0,36 [0.14] 10,47 [4.12] 10,48 [4.13] 2,62 [1.03] 1,03 [0.41] 12,70 [5.00] 15,24 [6.00] 3/8-24 1815K 25,25 [9.94] 4,29 [1.69] 1,60 [0.63] 4,01 [1.58] 20,96 [8.25] 0,36 [0.14] 10,47 [4.12] 10,48 [4.13] 2,62 [1.03] 1,03 [0.41] 12,70 [5.00] 15,24 [6.00] 3/8-24 MS-3102E-L4S-5P OPTIONAL SPEED SENSOR C H G N D P J A E F B FLANGE & SHAFT PER AND 10262 K 6 HOLES FLANGE & SHAFT PER AND 20002 For reference only Honeywell • Sensing and Control 3 Model 1815 Enhanced Accuracy Rotary Torque Sensor Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008781-1-EN IL50 GLO June 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.