Model 3419 Seat Belt Load Cell DESCRIPTION The seat belt sensor’s design and calibration method essentially make it independent of belt thickness, which may change under load. It provides excellent repeatability without the need for the extensive belt wrap. FEATURES • Up to .1 in of belt thickness • Small size • Installs without “threading” • Low sensitivity to belt thickness change Model 3419 PERFORMANCE SPECIFICATIONS Characteristic MOUNTING DIMENSIONS Measure Load range 3500 lb Non-linearity ±2 % of rated output Hysteresis ±4 % of rated output Repeatability ±1.0 % of rated output Output @ rated capacity 2 mV/V (nominal) Operation Tension/compression Resolution Infinite Standard calibration Tension (+) and compression (-) ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -54 °C to 93 °C [-65 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.003 % of rated output/°F Temperature effect, output ±0.003 % of reading/°F ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Foil Excitation (maximum) 20 Vdc or Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance (tolerance) 350 ohm Zero balance ±2.0 % Electrical termination 6 ft of four-conductor cable 6 FT 4 CONDUCTOR CABLE 1.0 PIGTAILS 2.0 3-3/32 HINGE POINT FOR BELT INSTALLATION & REMOVAL REMOVABLE PIN IS REINSERTED BEFORE CLOSING 0.10 MAX BELT THICKNESS 2.0 TYPICAL SYSTEM DIAGRAM Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC In-Line Amplifiers (Used with unamplified units only) Output Amplifier Universal In-Line Amplifiers +/-5 VDC UV +/-10 VDC UV-10 0 +/-5 VDC UBP 4-20mA (3 wire) U3W 4-20mA (2 wire) U2W DIN rail Mount In-Line Amplifiers 0 +/- 5 VDC (3 wire) DV-05 4-20mA (3 wire) DA-05 0 +/- 10 VDC (3 wire) DV10 Power Supply Honeywell In-Line Amplifier Output Input Serial Number Display Units MECHANICAL SPECIFICATIONS Characteristic Measure Static overload capacity 150 % of nominal capacity Weight 8 oz Band thickness 2,54 mm [0.10 in] Band width 50,8 mm [2.0 in] RANGE CODES MODEL 3419 SC500 SC2001 GM 7541 SC1000 SC3004 NK 7558 SC2000 HH 7561-PSD 2003.1 lb. L1 L2 L3 L4 VALUE CLEAR UP DOWN SETUP CHAN TARE ENTER EXIT Mating Connectors & Cables Wire Red (+) excitation Black (-) excitation Green (+) output White (-) output 023-LW181-023-LF Mating Connector 7205-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal) 7205-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal) 7205-83-XX* Mating connector & 6 conductor cable (for connection to instrument 7541) 7205-82-XX** Mating connector & 4 conductor cable (for connection to instrument 7541) * XX represents length in feet ** XX represents length in feet 2 Honeywell • Sensing and Control 100ft maximum 20ft maximum Models 3419 Seat Belt Load Cell Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008677-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.