® Chip Aluminum Electrolytic Capacitor Taping Specifications 1.5+0.1-0 Surface Mount 4.0±0.1 2.0±0.1 t B Y F E CARRIER TAPE W H P DXL Y±0.3 H±0.2 W±0.2 4 x 4.5 12.0 14.25 5 x 4.5 12.0 5.7 6.3 x 4.5 16.0 P±0.1 E±0.1 F±0.1 B±0.2 t 4.7 8.0 1.75 5.5 5.0 0.4 5.7 12.0 1.75 5.5 5.0 0.4 7.0 7.0 12.0 1.75 7.5 5.1 0.4 3 x 5.4 12.0 3.7 3.7 8.0 1.75 5.5 5.8 0.4 4 x 5.4 12.0 4.7 4.7 8.0 1.75 5.5 5.8 0.4 4 x 5.8 12.0 4.7 4.7 8.0 1.75 5.5 5.8 0.4 5 x 5.4 12.0 5.7 5.7 12.0 1.75 5.5 5.8 0.4 5 x 5.8 12.0 5.7 5.8 12.0 1.75 5.5 5.8 0.4 6.3 x 5.4 16.0 7.0 7.0 12.0 1.75 7.5 5.8 0.4 6.3 x 5.8 16.0 7.0 7.0 12.0 1.75 7.5 6.5 0.4 6.3 x 7.7 16.0 7.0 7.0 12.0 1.75 7.5 8.2 0.4 8 x 6.2 24.0 8.7 8.7 16.0 1.75 11.5 11.1 0.4 8 x 10.2 24.0 8.7 8.7 16.0 1.75 11.5 11.1 0.4 10 x 10.2 24.0 10.7 10.7 16.0 1.75 11.5 11.2 0.4 REEL 21 MIN. Leading 13±0.5 50 MIN. 2 Diameter G 3, 4, 5 14 6. 3 18 8, 10 26 (mm) G 380±2 3 DXL(mm) Quantity per Reel 4 x 4.5 2000 5 x 4.5 2000 6.3 x 4.5 1000 3 x 5.4 2000 4 x 5.4 2000 4 x 5.8 2000 5 x 5.4 2000 5 x 5.8 1000 6.3 x 5.4 1000 6.3 x 5.8 1000 6.3 x 7.7 900 8 x 6.3 1000 8 x 10.2 500 10 x 10.2 500 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 23 ® Surface Mount Chip Aluminum Electrolytic Capacitor Permissible Reflow Conditions Permissible Reflow Condition: air reflow and IR reflow Peak temperature • Preheat: Within 120 sec, 150°C and less. • Peak Temperature: Less than 230°C, within 5 sec. • Time for more than200°C; within 30 sec. • Reflow time: within 30 sec. temperature at the top of capacitor (°C) 230 200 30sMax. 150 preheat reflow time (30sMaz.) Time (S) • Please cool the PC boards quickly after soldering. • In case of capacitors are place other than the permissible reflow condition, please consult us. Land pattern c a b b Diameter a b c 3 0.8 2.2 1.7 4 1.0 2.6 1.8 5 1.4 3.0 1.8 6.3 2.1 3.5 1.8 8 2.8 4.1 2.1 10 4.3 4.4 2.5 (mm) 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 24