Designed and Manufactured in Germany Specification Oscillator type: Rev.: 9 Date: 2014-07-08 AXIOM30 High stability Miniature OCXO with HCMOS Output Parameter Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day, after 30 days operation st Long term (aging) 1 year, after 30 days operation Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Symmetry (duty cycle) Warm-up time Reference voltage VREF output (Note 3) Supply voltage VS min. typ. ±0.8 ±1 0.15 0.25 ±1 1.65 2.5 Positive GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany 3.15 4.75 100 ppm ppm V V Condition VC @ centre value Option II = “200” Option II = “100” Option II = “50” Option II = “25” Option II = “10” Option II = “05” (Note 2) Option II = “200”, “100” All other Options II Option II = “200”, “100” All other Options II 10 MHz to 12.8 MHz > 12.8 MHz Option I = “33” Option I = “50” and “12” kΩ HCMOS 15 40 60 3 3.15 4.75 11.4 3.0 5.0 3.3 5.0 12.0 Current consumption (warm-up) Enclosure (see drawing) (LxWxH) Weight Handling and Testing Processing Unit 10 125 MHz 10.000/12.800/100.000/125.000 MHz ppm ±500 ppb ±200 ppb ±100 ppb ±50 ppb ±25 ppb ±10 ppb ppb ±5 -10 +60 °C ±10 ppb ±10 ppb ±10 ppb ±2 ppb ±200 ppb ±100 ppb Current consumption (steady state) @ +25°C Operable temperature range Storage temperature range max. -20 -40 3.45 5.25 12.6 300 200 100 800 500 250 +70 +85 20.5x20.5x12 max. pF % min V V V V V mA mA mA mA mA mA °C °C mm 10 g In accordance with AXAN-011 In accordance with AXAN-012 AXIOM30 Rev.9 Drawing D2 Page 1(3) @ 50% of VL to VH ∆ffinal/f0 < ±0.1 ppm Option I = “33” Option I = “50” and “12” Option I = “33” Option I = “50” Option I = “12” Option I = “33” Option I = “50” Option I = “12” Option I = “33” Option I = “50” Option I = “12” IEC 60679-3 CO 41 www.axtal.com www.axtal.com www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Notes: 1. 2. 3. 4. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Other operating temperature range on request Other reference voltages on request Not all combinations of options may be available at any frequency Ordering Code: Model (Specification) AXIOM30 Option I Supply 50 Option II Stability 100 Revision Frequency [MHz] Rev.9 10.000 Enclosure drawing Pin connections Pin # 1 2 3 4 5 Symbol VS RF OUT GND VC VREF Function Supply Voltage RF Output Ground Control Voltage (EFC) Reference voltage Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Other environmental conditions on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM30 Rev.9 Drawing D2 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Revision History Rev. Drawing Date [dd.mm.yyyy] 9 9 D1 D2 01.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Editorial changes AXIOM30 Rev.9 Drawing D2 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]