Designed and Manufactured in Germany Specification Oscillator type: Rev.: 4 Date: 2014-07-09 AXIOM35 High stability Miniature OCXO with Sine Wave Output Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) 10 40 10.000 / 16.384 / 20.000 operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day, after 30 days operation st Long term (aging) 1 year, after 30 days operation Frequency adjustment range Electronic Frequency Control (EFC) -10 EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Output level Harmonics Warm-up time Reference voltage VREF output (Note 3) Supply voltage VS ±3 ±0.8 0.15 0.25 typ. ±1 1.65 2.5 Positive Enclosure (see drawing) (LxWxH) Weight Packing ESD Sensitivity GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Unit Condition ±500 ±200 ±100 ±50 ±25 ±10 ±5 60 ±10 ±10 ±10 ±2 ±200 ±100 MHz MHz ppm ppb ppb ppb ppb ppb ppb ppb °C ppb ppb ppb ppb ppb ppb VC @ centre value Option II = “200” Option II = “100” Option II = “50” Option II = “25” Option II = “10” Option II = “05” (Note 2) VS ±5% RL ±10% Option II = “200”, “100” All other Options II Option II = “200”, “100” All other Options II 3.15 4.75 ppm ppm V V Option II = “200”, “100” All other Options II Option I = “33” Option I = “50” 100 kΩ Sinus 50 +3 -20 5 4.75 11.4 3.0 5.0 5.0 12.0 Current consumption (steady state) @ +25°C Current consumption (warm-up) Operable temperature range Storage temperature range max. -20 -40 5.25 12.6 200 100 500 250 +70 +85 20.5x20.5x12 max. 10 Palette 1500 AXIOM35 Rev.4 Drawing D1 Page 1(3) Ω dBm dBc min V V V V mA mA mA mA °C °C ± 10 % ∆ffinal/f0 < ±0.1 ppm Option I = “50” Option I = “12” Option I = “50” Option I = “12” Option I = “50” Option I = “12” Option I = “50” Option I = “12” mm g IEC 60679-3 CO 41 V HBM as in IEC 61000-4-2 www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. Other operating temperature range on request 3. Other reference voltages on request Ordering Code: Model (Specification) AXIOM35 Option I Supply voltage 12 Option II Stability 100 Revision Frequency [MHz] Rev.4 10.000 Enclosure drawing Pin connections Pin # 1 2 3 4 5 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM35 Rev.4 Drawing D1 Page 2(3) Symbol VS RF OUT GND VC VREF Function Supply Voltage RF Output Ground Control Voltage (EFC) Reference voltage www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 Sealing tests (if applicable) Solderability Resistance to soldering heat Shock 2-20 2-58 4.6.3 2-27 4.6.8 Vibration, sinusoidal 2-6 4.6.7 Endurance tests - ageing 4.7.1 - extended aging 4.7.2 Other environmental conditions on request Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 4 4 D0 D1 20.08.2009 09.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Various parameters updated, options added Editorial changes AXIOM35 Rev.4 Drawing D1 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]