Designed and Manufactured in Germany Specification Oscillator type: Rev.: 9 AXIS30 SMD Wide-pull VCXO in CO27 package Date: 2014-07-07 SMD replacement for Fujitsu M2 (F100) Parameter min. max. Unit Frequency range Standard frequencies 10 90 12.288 / 16.384 / 22.579 / 24.576 / 27.000 / 28.224 MHz MHz Frequency stability Initial tolerance vs. operating frequency range vs. supply voltage variation vs. load change st Long term (aging) 1 year Aging following years Frequency adjustment range Electronic Frequency Control (EFC) range (Note 3) EFC voltage VC (Note 3) EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity Construction Handling and Testing Processing typ. ±80 10 5 10 5 -10 -5 -10 -5 ±500 ±500 ±1000 ±1500 ±2000 ±2500 ±3000 0.25 0.15 ±1100 ±1600 ±2100 ±2600 ±3200 4.75 3.15 Condition ppm ppm ppm ppm ppm ppm ppm @ 40°C @ 40°C ppm ppm ppm ppm ppm ppm ppm V V Option 2 = “ ” Option 2 = “500” Option 2 = “1000” Option 2 = “1500”* Option 2 = “2000”* Option 2 = “2500”* Option 2 = “3000”* Option 1 = “50“ (5 V) Option 1 = “33” (3.3 V) -20°~+70°C (Note 2) positive 100 kΩ HCMOS 15 40 4.75 3.13 5.0 3.3 -45 -50 10 60 4 5.25 3.47 40 +90 +95 14.4x9.5x6 max 3 pF ns % ms V V mA °C °C mm gram Tape & reel 1500 V RoHS/ Lead(Pb) -free In accordance with AXAN-011 In accordance with AXAN-012 @ VS/2 Option 1 = “50“ (5 V) Option 1 = “33” (3.3 V) @ +25°C IEC 61837 CO 27 IEC 60286-3 HBM as IEC 61000-4-2 EU directive2002/95/EC www.axtal.com www.axtal.com Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated nd 2. Frequency vs. temperature response is a 2 order parabola with turn-over point at ≈ +20°C to +30°C 3. *Pulling Range Option 2 = “1500” or larger only possible with EFC voltage 0.25V ~ 4.75 V GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS30 Rev.9 Drawing D2 Page 1(3) www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Option 1 Option 2 [Supply Voltage] [Tuning Range] AXIS30 50 2000 Example: AXIS30-50-2000_Rev.9 – 28.224 MHz Model Revision Frequency [MHz] Rev.9 28.224 Enclosure drawing Pin connections Pin # 1 2 3 4 6 Symbol VC N.C. GND RF OUT Vs Function Control Voltage (EFC) No connection Ground RF Output Supply Voltage Environmental conditions: Test IEC 60068 Part ... Visual inspection, dimensions Solderability Resistance to soldering heat Shock* IEC 60679-1 clause ... Test conditions 4.3 Enclosure styles as in IEC 60679-3 or 61837, if applicable Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s 2-20 2-58 4.6.3 2-27 4.6.8 Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Other environmental conditions on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS30 Rev.9 Drawing D2 Page 2(3) www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Revision History Rev. Drawing Date [dd.mm.yyyy] 9 9 D1 D2 01.10.2012 07.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Editorial changes AXIS30 Rev.9 Drawing D2 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected]