Designed and Manufactured in Germany Specification Oscillator type: Rev.: 3 Date: 2014-07-08 AXIOM15 High Stability SMD OCXO with Sine Wave Output Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @+25°C vs. operating temperature range (steady state) 10 operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day, after 30 days operation st Long term (aging) 1 year, after 30 days operation Frequency adjustment range Electronic Frequency Control (EFC) -10 EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level (Note 3) Harmonics Warm-up time Supply voltage VS typ. Enclosure (see drawing) (LxWxH) (Note 4) Weight Packing Handling and Testing Processing Unit Condition 120 MHz MHz ppm ppb ppb ppb ppb ppb ppb °C ppb ppb ppb ppb ppb ppb @ VC = 2.5 V Option II = “100” Option II = “50” Option II = “25” Option II = “10” Option II = “05” (Note 2) VS ±5% RL ±10% Option II = “100” All other Options II Option II = “100” All other Options II 10.0000 ±1 ±2 ±0.8 0.25 ±500 ±100 ±50 ±25 ±10 ±5 +60 ±10 ±10 ±10 ±2 ±200 ±100 ±5 ±1 2.50 positive 4.75 100 Sine wave 50 +3 4.75 11.6 ppm ppm V Option II = “100” All other Options II kΩ 5.0 12.0 Current consumption (steady state) @ +25°C Current consumption (warm-up) Operable temperature range Storage temperature range max. -20 -40 -20 5 5.25 12.6 200 100 600 250 +70 +85 Ω dBm dBc min V V mA mA mA mA °C °C 25.6x22.2x13 max. mm 10 g Tape & reel In accordance with AXAN-011 In accordance with AXAN-012 ±10 % ∆ffinal/f0 < ±0.1 ppm Option I = “50” Option I = “12” Option I = “50” Option I = “12” Option I = “50” Option I = “12” IEC 61837 CO 28 IEC 60286-3 www.axtal.com www.axtal.com Notes: 1. 2. 3. 4. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Other operating temperature range on request Higher output level on request Lower height H on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM15 Rev.3 Drawing D2 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code: Model (Specification) AXIOM15 Option I 50 Option II 100 Revision Rev.3 Frequency [MHz] 10.000 Enclosure drawing: Pin connections Pin # 1 2 3 4 5 6 7 Symbol VC N.C. VS RF OUT N.C. N.C. GND Function Control Voltage (EFC) No Connection Supply Voltage RF Output No Connection No Connection Ground Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Other environmental conditions on request GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM15 Rev.3 Drawing D2 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Revision History Rev. Drawing Date [dd.mm.yyyy] 3 3 D1 D2 10.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Editorial changes AXIOM15 Rev.3 Drawing D2 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]