Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 AXIS50 Low Phase Noise VHF/UHF VCXO (no PLL) with LVPECL or Sine Wave Output Parameter min. max. Unit Frequency range Standard frequencies 60 400 60 / 93.333 / 182 / 186.667 213.3 / 311.040 / 400.000 MHz MHz Frequency stability Initial tolerance vs. operating temperature range vs. supply voltage variation vs. load change Long term (aging) per year Long term (aging) over 10 years Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Output level (Option 1 = “S”) Harmonics (Option 1 = “S”) Sub-harmonics (Note 5) Output Levels (Option 1 = “L”) HIGH (VOH) LOW (VOL) Supply voltage VS Current consumption (steady state) Operating temperature range Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. 5. 6. 7. typ. ±15 0.15 ±5 ±10 ±0.1 ±0.1 ±2 ±10 ppm ppm ppm ppm ppm ppm ppm 3.15 ppm V Date: 2014-04-05 Condition (Note 2) VS ±5% Load ±5% @ 40°C @ 40°C (Note 3) positive 100 kΩ Sine Wave LVPECL Complementary 0 -30 -40 2.215 1.470 3.15 4.75 2.345 1.595 3.3 5.0 -20 2.420 1.745 3.45 5.25 40 +70 20.5x20.5x12.5 max. 8 Palette dBm dBc dBc Option 1 = “S” Option 1 = “L” RL = 50 Ω (Note 4) V V V V mA °C RL = 50 Ω to VS - 2 V (Note 6) Option 2 = “33” Option 2 = “50” (Note 7) mm g IEC 60679-3 CO 41 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Other stabilities over temperature on request Wider tuning range on request Higher output level on request For frequencies above 100 MHz sub-harmonics may be present. Please consult factory Output levels vary 1:1 with VS Current consumption depends on frequency, supply voltage and output option GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS50 Rev.1 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 Unit Condition V V °C VS to GND VC to GND Ordering Code Option 1 Option 2 [RF output] [Supply Voltage] AXIS50 S or L 50 Example: AXIS50-S-50_Rev.1 – 350.000 MHz Model Revision Frequency [MHz] Rev.1 350.000 Enclosure drawing Pin connections: Pin # 1 2 3 4 5 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS50 Rev.1 Drawing D0 Page 2(3) Symbol N.C. Q RF OUT GND VC VS Function No Connection (Option S) RF Output ( Q ) (Option L) RF Output (Q) Ground Control Voltage (EFC) Supply Voltage www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Handling and Testing Parameter Procedure Handling and Testing Processing Source Application Note AXAN-011 Application Note AXAN-012 Parameter Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant IEC60749-26 IEC60749-27 Yes Yes www.axtal.com www.axtal.com Condition HBM MM No No 2000 V 200 V Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 D0 05.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue – Replaces AXIS50-11 AXIS50 Rev.1 Drawing D0 Page 3(3) Author Checked HH HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]