Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2015-07-16 AXLE175 UHF Temperature Compensated Crystal SMD Oscillator Parameter Frequency range Frequency stability Initial tolerance @ +25°C vs. operating temperature range vs. supply voltage variation Long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level Harmonics Spurious Phase noise @ 1000 MHz (Note 2) Lock Detect Output LD (Note 3) Supply voltage VS Current consumption (Note 4) Operating temperature range Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. min. typ. 500 max. Unit 2500 MHz ±1 ppm ppm ±0.5 to ±3 See tables 1 & 2 ±0.2 ±1 ±2 ±5 0.5 2.5 Positive 4.5 100 Option 1 & 2 VS ±5 % ppm V kΩ Sine wave 50 +10 -30 -80 -110 -130 -150 3.0 4.75 ppm ppm Condition 5.0 150 5.25 200 25.4x25.4x8.0 max. 10 Palette Ω dBm dBc dBc dBc/Hz dBc/Hz dBc/Hz V V mA °C ±5% @ 10 kHz @ 100 kHz @ 1 MHz PLL locked mm g Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Please consult factory for phase noise of other frequencies Internal PLL with TCXO reference Current consumption depends on output frequency Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 7 +125 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXLE175 Rev.1 Drawing D0 Page 1(4) Unit Condition V V °C VS to GND VC to GND www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Frequency stability vs. temperature Option 1 05 10 15 20 25 30 Table 1 Stability [ppm] ±0.5 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 Lower Temperature Option 2 T [°C] 0 0 1 -10 2 -20 3 -30 4 -40 Upper Temperature Option 2 T [°C] A +50 B +60 C +70 D +75 E +80 F +85 Table 2 Ordering Code Option 2 [Temperature Revision range] AXLE175 Table 1 Table 2 Rev.1 Example: AXLE175-10-2C_Rev.1 – 1000.000 MHz Model Option 1 [Stability] Frequency [MHz] 1000.000 Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Source Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXLE175 Rev.1 Drawing D0 Page 2(4) www.axtal.com www.axtal.com Condition HBM MM 2000 V 200 V No No www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing - Bottom View - Pin connections Pin # 1 2 19 22 31,32 All others Symbol LD VC RF OUT D.N.C. VS GND Function Lock Detect Control Voltage (EFC) RF Output Do Not Connect Supply Voltage Ground, case GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXLE175 Rev.1 Drawing D0 Page 3(4) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Vibration, sinusoidal* Vibration, random* Endurance tests - ageing - extended aging IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B 516.4 3.6.40 2-6 5.6.7.1 516.4-4 2-64 5.6.7.3 201A 204D 214A 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 3.6.52 3.6.48 514.5 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 108A 5.7.1 5.7.2 4.8.35 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] Remarks Author Checked 1 D0 16.07.2015 First issue HH ME GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXLE175 Rev.1 Drawing D0 Page 4(4) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]