AXE50

Designed and
Manufactured
in Germany
Rev.: 1 Date: 2014‐05‐26 Specification AXE50 Oscillator type: Crystal Oscillator (SPXO) in double‐sealed DIL14/14 package
Parameter min. Frequency range Frequency stability Overall stability (Note 2)
typ. max. Unit 1
vs. operating temperature range Long term (aging) per year RF output Signal waveform Load Rise & decay time Symmetry (duty cycle)
Start‐up time Supply voltage VS 150
±10 to ±100
See table 1 See table 2
±2
HCMOS
15
5
60
10
3.45
5.25 45
25 40
3.15
4.75 3.3
5.0 Current consumption (steady state) (Note 3) Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1.
2.
3.
4.
MHz
20.7x13.1x7.5 max.
5
Palette or Tube
Condition ppm
Option 2 ppm
Option 3 @ 40°C pF
ns
%
ms
V
V mA
mA @ VS/2 Option 1 = “33” Option 1 = ”50” Option 1 = “33” Option 1 = ”50” mm
g
IEC 60679‐3 CO 02
IEC 60286‐3 Terminology and test conditions are according to IEC60679‐1 and MIL‐PRF‐55310, unless otherwise stated Other stabilities on request Depending on frequency and supply voltage All combinations of options might not be available. Please consult factory Absolute Maximum Ratings Parameter min.
max.
Supply Voltage VS Storage Temperature ‐0.5
‐55
VS + 10%
+125
Unit
Condition V
°C
VS to GND Overall stability and temperature range Option 2 10 15 25 50 100 Table 1 Stability [ppm] ±10 ±15 ±25 ±50 ±100 Lower Temperature
Option 3
T [°C]
0 0
1 ‐10
2 ‐20
3 ‐30
4 ‐40
5 ‐55
Table 2 Upper Temperature Option 3
T [°C] A
+50
B
+60
C
+70
D
+75
E
+80
F
+85
G
+105 H
+125 GmbH & Co. KG
Roemerring 9 D‐74821 Mosbach Germany AXE50 Rev.1 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected] Designed and
Manufactured
in Germany
Ordering Code Option 1 Option 2 Option 3
Revision Frequency [MHz] [Supply Voltage] [Stability] [Temperature range] AXE50 33 or 50 Table 1 Table 2
Rev.1
10.000 Example: AXE50‐50‐25‐2C_Rev.1 – 10.000 MHz Model Enclosure drawing Pin connections Pin # Symbol
1
N.C.
7
GND
8
RF OUT
14
Vs
All N.C.
others
Function No Connection Ground RF Output Supply Voltage No Connection Handling and Testing Parameter Procedure
Handling and Testing Processing Parameter Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant Application Note AXAN‐011
Application Note AXAN‐012
Procedure
IEC60749‐26
HBM
IEC60749‐27
MM
 Yes  No
 Yes  No
Source www.axtal.com www.axtal.com Condition 2000 V 200 V GmbH & Co. KG
Roemerring 9 D‐74821 Mosbach Germany AXE50 Rev.1 Drawing D0 Page 2(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected] Designed and
Manufactured
in Germany
Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2‐17 IEC 60679‐1 Clause 5.6.2 MIL‐STD‐ 202G Method 112E MIL‐STD‐ 810F Method MIL‐PRF‐ 55310D Clause 3.6.1.2 2‐20 2‐58 5.6.3 208H 210F 3.6.52 3.6.48 2‐27 5.6.8 213B 516.4 3.6.40 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half‐sine pulse Test Fc, 30 min per axes, 10 Hz ‐ 55 Hz 0,75mm; 55 Hz ‐ 2 kHz, 10g Test Fdb Vibration, 2‐6 5.6.7.1 201A 516.4‐4 3.6.38.1 sinusoidal* 204D 3.6.38.2 Vibration, 2‐64 5.6.7.3 214A 514.5 3.6.38.3 random* 3.6.38.4 Endurance tests 108A ‐ ageing 5.7.1 4.8.35 30 days @ 85°C, OCXO @25°C ‐ extended aging 5.7.2 1000h, 2000h, 8000h @85°C Other environmental conditions on request Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 D0 26.05.2014 Remarks First edition AXE50 Author Checked BN BN GmbH & Co. KG
Roemerring 9 D‐74821 Mosbach Germany AXE50 Rev.1 Drawing D0 Page 3(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E‐mail: [email protected]