Designed and Manufactured in Germany Specification Oscillator type: Rev.: 5 AXIS30-13 SMD Wide-pull VCXO in CO27 package Parameter min. Frequency range Standard frequencies Frequency stability Initial tolerance @ +25°C vs. operating temperature range vs. supply voltage variation vs. load change Long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operating temperature range max. Unit 10 66 17.500/28.375/29.500 32.000/40.000/66.000 MHz MHz -50 +100 ±45 ±5 ±2 ±3 ppm ppm ppm ppm ppm 3.15 ppm V ±500 0.15 1.65 positive 100 HCMOS 25 15 40 3.13 Condition @ VC = 1.65 V steady state @ 40°C kΩ 3.30 -40 10 60 4 3.47 30 +85 14.4x9.5x6.0 max. Enclosure (see drawing) Weight Packing Notes: 1. typ. Date: 2014-07-07 3 pF pF ns % ms V mA °C f < 20 MHz f ≥ 20 MHz mm g IEC 61837 CO 27 Tape & Reel @ VS/2 @ +25°C IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 Unit Condition V V °C VS to GND VC to GND Ordering Code Model Revision Frequency [MHz] AXIS30-13 Rev.5 29.500 Example: AXIS30-13_Rev.5 – 29.500 MHz GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS30-13 Rev.5 Drawing D1 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin # 1 2 3 4 5 6 Symbol VC N.C. GND RF OUT N.C. Vs Function Control Voltage (EFC) No Connection Ground RF Output No Connection Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXIS30-13 Rev.5 Drawing D1 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Vibration, sinusoidal* Vibration, random* Endurance tests - ageing - extended aging IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B 516.4 3.6.40 2-6 5.6.7.1 516.4-4 2-64 5.6.7.3 201A 204D 214A 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 3.6.52 3.6.48 514.5 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 108A 5.7.1 5.7.2 4.8.35 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 5 5 D0 D1 10.04.2008 07.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Standard frequencies added Editorial changes AXIS30-13 Rev.5 Drawing D1 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]