OPI 3000P Optically Coupled Isolator 30kV Isolation The OPI 30000P Optically Coupled Isolator consist of a Infrared emitter coupled to a silicon photo transistor. The series is designed for applications requiring high voltage isolation between input & output. • 30kV Isolation • High current transfer ratio,>50% @10mA • Metal can version OPI30000MC with base connection also available. This component is RoHS compliant Pb MECHANICAL DATA 7.0 60.0 EPOXY BACKFILL A E K C 7.0 0.46 Sq leads min 15mm long 2.54 OPI3000P BEDFORD OPTO PLASTIC COMPONENT VERSION WHITE ANODE DOT ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 100mA 5 Volts 165mW (ii) OUTPUT TRANSISTOR COLLECTOR-EMITTER VOLTAGE COLLECTOR CURRENT POWER DISSIPATION 35 Volts 15 mA 165mW (iii) OPERATING TEMP -25OC TO +100OC STORAGE TEMP -25OC TO +100OC INPUT-TO-OUTPUT ISOLATION VOLTAGE + 30KV DC (i) SOLDERING TEMP 1.6mm from body max 5secs 240 OC BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 1/2 27.08.04 ISS A OPI 3000P i) Based on mechanical spacing,not measured ii) Thermal resistance 375 K/W iii) Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. This component is RoHS compliant Pb OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Forward Voltage VF - - 1.3 V If = 20mA Reverse Voltage VR 5.0 - - V Ir = 100uA BVceo 35 - - V Ic = 10 uA Iceo - - 10 nA Vce = 10 V BVeco 5.0 - - V Ic = 100uA INPUT DIODE OUTPUT TRANSISTOR Collector-Emitter Breakdown Voltage Collector-Emitter Leakage Current Emitter-Collector Breakdown COUPLED PAIR DC Current Transfer Ratio IC/IF OPI 3000P - 50 - - % If = 10 mA Vce Isolation Voltage VISO 30 - - KV - VCE(SAT) - - 0.4 V If = 10 mA, Turn-on time t on - 8 - uS Ic=2mA Turn-off time t off - 8 - uS Vcc = 5V Collector-emitter saturation voltage OPTO COUPLER RANGE OPI110 TUBULAR 10kV ATEX CERTIFIED OPI1264 TUBULAR 10kV ATEX CERTIFIED OPI1000L SURFACE MOUNT ATEX CERTIFIED OPI2000M HIGH SPEED SURFACE MOUNT ATEX CERTIFIED OPI2000MK HIGH SPEED HIGH CMR BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 2/2 27.08.04 ISS A