KSM13003 TO-126 High Voltage Switch Mode Applications • High Speed Switching • Suitable for Switching Regulator and Motor Control NPN Silicon Transistor 1. Emitter 2.Collector 3.Base Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage Value 700 Units V 400 V VCEO Collector-Emitter Voltage VEBO Emitter-Base Voltage 9 V IC Collector Current (DC) 1.5 A ICP Collector Current (Pulse) 3 A IB Base Current PC Collector Dissipation (TC=25°C) TJ TSTG 0.75 A 20 W Junction Temperature 150 °C Storage Temperature - 65 ~ 150 °C Electrical Characteristics TC=25°C unless otherwise noted Symbol BVCEO Parameter Collector-Emitter Breakdown Voltage Test Condition IC = 5mA, IB = 0 IEBO Emitter Cut-off Current VEB = 9V, IC = 0 hFE *DC Current Gain VCE = 2V, IC = 0.5A VCE = 2V, IC =1A VCE(sat) *Collector Emitter Saturation Voltage IC = 0.5A, IB = 0.1A IC = 1A, IB = 0.25A IC = 1.5A, IB = 0.5A 0.5 1 3 V V V VBE(sat) *Base Emitter Saturation Voltage IC = 0.5A, IB = 0.1A IC = 1A, IB = 0.25A 1 1.2 V V Cob Output Capacitance VCB = 10V , f = 0.1MHz fT Current Gain Bandwidth Product VCE = 10V, IC = 0.1A VCC =125V, IC = 1A IB1 = 0.2A, IB2 = - 0.2A RL = 125Ω tON Turn On Time tSTG Storage Time tF Fall Time Min. 400 Typ. 8 5 Max. Units V 10 µA 40 21 pF 4 MHz 1.1 µs 4.0 µs 0.7 µs * Pulse Test: Pulse Width=5ms, Duty Cycle≤10% 2014-9-15 1 www.kersemi.com KSM13003 Typical Characteristics 100 VCE = 2V IB = 500mA IB = 450mA IB = 400mA 1.6 1.2 IB = 350mA IB = 300mA IB = 250mA IB = 200mA IB = 150mA IB = 100mA 0.8 hFE, DC CURRENT GAIN IC[A], COLLECTOR CURRENT 2.0 IB = 50mA 10 1 0.4 IB = 0mA 0.1 0.01 0.0 0 1 2 3 4 5 0.1 VCE[V], COLLECTOR-EMITTER VOLTAGE Figure 2. DC current Gain 10 10 IC = 4 IB tSTG VBE(sat) 1 1 tSTG, tF[µs], TIME VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 10 IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic 0.1 tF 0.1 VCE(sat) 0.01 0.01 0.1 1 0.01 0.1 10 1 IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Figure 4. Switching Time 30 10 µ 10 ICMAX. (pulse) PC[W], POWER DISSIPATION s 25 0µ 10 s 1m IC MAX. (DC) s 5m s IC[A], COLLECTOR CURRENT 1 1 0.1 15 10 5 0 0.01 1 10 100 0 1000 25 50 75 100 125 150 175 o VCE[V], COLLECTOR-EMITTER VOLTAGE TC[ C], CASE TEMPERATURE Figure 5. Safe Operating Area 2014-9-15 20 Figure 6. Power Derating 2 www.kersemi.com KSM13003 Package Dimensions 8.00 ±0.30 ±0.20 3.25 ±0.20 ø3.20 ±0.10 11.00 14.20MAX 3.90 ±0.10 TO-126 (1.00) (0.50) 0.75 ±0.10 1.75 ±0.20 13.06 0.75 ±0.10 16.10 ±0.30 ±0.20 1.60 ±0.10 #1 2.28TYP [2.28±0.20] 2014-9-15 +0.10 0.50 –0.05 2.28TYP [2.28±0.20] 3 www.kersemi.com