PHOTOTRANSISTOR Part Number: WP3DP3BT Description Features z Mechanically and spectrally matched to the infrared emitting Made with NPN silicon phototransistor chips. LED lamp. z Blue transparent lens. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: JAN/16/2015 PAGE: 1 OF 6 DRAWN: P.Cheng ERP: 1101003911 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Min. VBR CEO Collector-to-Emitter Breakdown Voltage VBR ECO Emitter-to-Collector Breakdown Voltage VCE (SAT) Collector-to-Emitter Saturation Voltage Collector Dark Current I CEO Typ. Max. Units Test Conditions 30 V IC=100uA Ee=0mW/c ㎡ 5 V IE=100uA Ee=0mW/c ㎡ 0.8 V IC=2mA Ee=20mW/c ㎡ 100 nA VCE=10V Ee=0mW/c ㎡ TR Rise Time (10％ to 90％ ) 15 us TF Fall Time (90％ to 10％ ) 15 us 0.2 mA I (ON) On State Collector Current 0.1 VCE = 5V IC=1mA RL=1000Ω VCE = 5V Ee=1mW/c ㎡ λ=940nm Absolute Maximum Ratings at TA=25°C Parameter Max.Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature 100mW Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Lead Soldering Temperature (>5mm for 5sec) SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu 260°C DATE: JAN/16/2015 PAGE: 2 OF 6 DRAWN: P.Cheng ERP: 1101003911 SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: JAN/16/2015 PAGE: 3 OF 6 DRAWN: P.Cheng ERP: 1101003911 PACKING & LABEL SPECIFICATIONS WP3DP3BT Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: JAN/16/2015 PAGE: 4 OF 6 DRAWN: P.Cheng ERP: 1101003911 SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: JAN/16/2015 PAGE: 5 OF 6 DRAWN: P.Cheng ERP: 1101003911 SPEC NO: DSAH7501 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: JAN/16/2015 PAGE: 6 OF 6 DRAWN: P.Cheng ERP: 1101003911