apfa3010seezgqbdc

3.0x1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
ATTENTION
Part Number: APFA3010SEEZGQBDC
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Hyper Red
Green
Blue
Features
Descriptions
z 3.0mmx1.0mm right angle SMT LED, 1.5mm thickness.
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z Low power consumption.
z The Green source color devices are made with InGaN
z Wide viewing angle.
z Ideal for backlight and indicator.
on Sapphire Light Emitting Diode.
z The Blue source color devices are made with InGaN
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z RoHS compliant.
z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 1 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
Selection Guide
Part No.
Dice
Iv (mcd) [2]
@ 20mA
Lens Type
Min.
Typ.
80
140
200
300
40
70
Hyper Red (AlGaInP)
APFA3010SEEZGQBDC
Green (InGaN)
Water Clear
Viewing
Angle [1]
Blue (InGaN)
2θ1/2
120°
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Hyper Red
Green
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
630
515
460
nm
IF=20mA
Hyper Red
Green
Blue
621
525
465
nm
IF=20mA
Spectral Line Half-width
Hyper Red
Green
Blue
20
30
25
nm
IF=20mA
C
Capacitance
Hyper Red
Green
Blue
25
45
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Green
Blue
2
3.3
3.3
2.5
4.1
4
V
IF=20mA
IR
Reverse Current
Hyper Red
Green
Blue
10
50
50
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Blue
Units
Power dissipation
75
102.5
120
mW
DC Forward Current
30
25
30
mA
Peak Forward Current [1]
195
150
150
mA
Reverse Voltage
5
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 2 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
APFA3010SEEZGQBDC
Hyper Red
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 3 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
Green
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 4 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
Blue
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 5 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
APFA3010SEEZGQBDC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 6 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228
PACKING & LABEL SPECIFICATIONS
APFA3010SEEZGQBDC
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAJ4410
REV NO: V.13B
DATE: APR/29/2015
PAGE: 7 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203013228