3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APFA3010SURKCGKPBAC PRELIMINARY SPEC ATTENTION Hyper Red Green Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 1.5mm The Hyper Red source color devices are made with THICKNESS. InGaAlP on GaAs substrate Light Emitting Diode. z LOW POWER CONSUMPTION. The Green source color devices are made with InGaAlP on z WIDE VIEWING ANGLE. GaAs substrate Light Emitting Diode. z IDEAL FOR BACKLIGHT AND INDICATOR. The Blue source color devices are made with InGaN z PACKAGE : 2000PCS / REEL. on SiC Light Emitting Diode. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. Static electricity and surge damage the LEDS. z RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 1 OF 7 ERP: 1203007279 Selection Guide Part No. Dice Lens Type Hyper Red (InGaAlP) APFA3010SURKCGKPBAC WATER CLEAR Green (InGaAlP) Blue (InGaN) Iv (mcd) [2] @ 20mA Min. Typ. 70 200 18 50 18 60 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 574 468 nm IF=20mA Hyper Red Green Blue 635 570 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 28 20 21 nm IF=20mA C Capacitance Hyper Red Green Blue 35 15 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.95 2.1 3.2 2.5 2.5 4 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 75 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 100 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 2 OF 7 ERP: 1203007279 APFA3010SURKCGKPBAC Hyper Red SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 3 OF 7 ERP: 1203007279 Green SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 4 OF 7 ERP: 1203007279 Blue SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 5 OF 7 ERP: 1203007279 APFA3010SURKCGKPBAC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 6 OF 7 ERP: 1203007279 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH7953 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu APFA3010SURKCGKPBAC DATE: SEP/29/2007 DRAWN: W.J.Hua PAGE: 7 OF 7 ERP: 1203007279