1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612SURKQBDC-F01 PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Hyper Red Blue Description Features z 1.6mmx1.25mm SMT LED, 0.65mm THICKNESS. z BI-COLOR,LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Blue source color devices are made with AlInGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203003581 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 70 150 50 90 Hyper Red (InGaAlP) APTB1612SURKQBDC-F01 Viewing Angle [1] 2θ1/2 120° WATER CLEAR Blue (AlInGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 468 nm IF=20mA Hyper Red Blue 635 470 nm IF=20mA Spectral Line Half-width Hyper Red Blue 28 25 nm IF=20mA C Capacitance Hyper Red Blue 35 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Blue 1.95 3.3 2.5 4 V IF=20mA IR Reverse Current Hyper Red Blue 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Blue Units Power dissipation 75 120 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203003581 APTB1612SURKQBDC-F01 Hyper Red SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203003581 Blue SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203003581 APTB1612SURKQBDC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203003581 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH3787 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu APTB1612SURKQBDC-F01 DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203003581