8 7 6 5 4 3 2 1 150.79 mm [5.936 in] D A 4.60 mm [0.181 in] 19.60 mm [0.772 in] 135.79 mm [5.346 in] 47.50 mm [1.870 in] 88.24 mm [3.474 in] (Inlay Length) B B 58.75 mm [2.313 in] (Inlay Width) 8.50 mm D 2.00 mm [0.079 in] (Inlay Depth) 40.00 mm [1.575 in] 65.79 mm [2.590 in] 42.00 mm [1.654 in] (Inner Box Depth) [0.335 in] A ENCLOSURE ASSEMBLY TOP VIEW 5.00 mm 4X [0.197 in 4X ] 15.00 mm [0.591 in] 12.50 mm [0.492 in] (Inner Lid Depth) SECTION A-A END VIEW OF ASSEMBLY 6.00 mm [0.236 in] C C 62.50 mm [2.461 in] Polycarbonate Version Only 6.00 mm [0.236 in] 6.50 mm [0.256 in] File #E65324 NEMA 4, 4X SECTION B-B (SIDE VIEW OF ASSEMBLY) Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 2.25 mm 6.00 mm 6X [0.089 in 0.236 in 6X ] 119.95 mm [4.722 in] B 107.00 mm [4.213 in] 7.00 mm 95.00 mm TYP. [3.740 in] NOTE 3.50 mm THRU 4X [0.138 in THRU 4X ] Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) [0.276 in] 1555CF 59.00 mm [2.323 in] 1555CF Regular Enclosure 40.01 mm [1.575 in] 52.00 mm [2.047 in] 85.01 mm [3.347 in] A 114.00 mm [4.488 in] 64.95 mm [2.557 in] 7 56.00 mm [2.205 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1555CFPL 1598ATS100 SC1554 A 111.00 mm [4.370 in] [0.089 in 0.236 in 6X ] 1555CF42 FLANGED LID INSIDE VIEW 6 1555CF42GY 1555C2F42GY ACCESSORIES 82.02 mm [3.229 in] 2.25 mm 6.00 mm 6X BOX INSIDE VIEW 8 37.01 mm [1.457 in] 28.00 mm TYP. [1.102 in] 5 4 3 2 1