CPC1020N

CPC1020N
30V Normally-Open Single-Pole
4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Rating
30
1.2
0.25
Description
The CPC1020N is a 30V, single-pole, normally-open
(1-Form-A) Solid State Relay. The ultra-low
on-resistance, 0.25, of this relay allows for
high-current operation.
Units
VP
ADC

IXYS Integrated Circuits Division's patented OptoMOS
architecture makes available the optically coupled
technology necessary to activate the output's efficient
MOSFET switches while providing 1500Vrms input
to output isolation. Control of the isolated output is
accomplished by means of the highly efficient infrared
LED at the input.
Features
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Wave Solderable
• Tape & Reel Version Available
Applications
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN/IEC 60950-1 Certified Component:
Certificate B 13 12 82667 003
Ordering Information
Part #
CPC1020N
CPC1020NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
3
2
Load
Load
Switching Characteristics
of Normally-Open Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-CPC1020N-R04
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1020N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Input Power Dissipation 1
Input Control Current
Peak (10ms)
Reverse Input Voltage
Total Power Dissipation 2
Isolation voltage, Input to Output
Operational Temperature
Storage Temperature
1
2
Ratings
30
75
50
1
5
400
1500
-40 to +85
-40 to +125
Units
VP
mW
mA
A
V
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 1.33 mW / ºC
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics
Capacitance, Input to Output
1
2
Conditions
Symbol
Min
Typ
Max
Units
IF=2mA
t < 10ms
IL=1A
VL=30VP
IL
ILPK
RON
ILEAK
-
0.116
-
1.2
3
0.25
1
ADC
A

A
IF=0mA, VL=25V, f=1MHz
ton
toff
COUT
-
0.48
0.65
33
3
3
-
IL=1A
IF=5mA
VR=5V
IF
IF
VF
IR
0.1
0.9
-
0.13
1.2
-
2
1.4
10
mA
mA
V
µA
VIO=0V, f=1MHz
CIO
-
3
-
pF
IF=5mA, VL=10V
ms
pF
Load current derates linearly from 1.2A @ 25oC to 0.58A @85oC.
Measurement taken within 1 second of on-time.
ESD Rating
ESD Rating (Human Body Model)
1000 Volts
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1020N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
25
20
15
10
25
30
20
25
15
10
5
5
0
Typical IF for Switch Operation
(N=50, IL=100mA)
25
Device Count (N)
15
10
5
0.093
0.101 0.109 0.117 0.125
LED Forward Current (mA)
5
1.3
1.2
1.1
1.0
-40
0.20
IF=5mA
25
20
15
10
5
0.114 0.115 0.116 0.117
On-Resistance (:)
0.118
37.8
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
1.5
1.0
0.5
39.4
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
700
2.0
38.2
38.6
39.0
Blocking Voltage (VP)
680
660
640
620
IF=2mA
0
-20
0
20
40
60
Temperature (ºC)
80
100
600
0
Typical IF for Switch Operation
vs. Temperature
(IL=1A)
3.5
10
20
30
40
LED Forward Current (mA)
50
0
Typical Turn-On Time vs. Temperature
(IL=100mA)
1.2
Turn-On Time (ms)
0.16
0.14
0.12
0.10
2.5
2.0
1.5
IF=2mA
1.0
IF=5mA
0.5
0
20
40
60
Temperature (ºC)
80
100
50
Typical Turn-Off Time vs. Temperature
(IL=100mA)
1.0
0.9
0.8
IF=2mA
0.7
0.6
0.5
0
-20
10
20
30
40
LED Forward Current (mA)
1.1
3.0
0.18
0.08
-40
0.79
Typical Blocking Voltage Distribution
(N=50)
Turn-Off Time (Ps)
1.4
Turn-On Time (ms)
1.5
0.55
0.63
0.71
Turn-Off Time (ms)
0
0.113
2.5
IF=50mA
IF=20mA
IF=10mA
10
0.47
10
0.133
1.6
15
0.60
15
Typical LED Forward Voltage Drop
vs. Temperature
LED Forward Voltage (V)
0.45
0.50
0.55
Turn-On Time (ms)
0
0
LED Forward Current (mA)
0.40
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=1A)
20
20
20
0
0.35
1.29
Device Count (N)
1.26
1.27
1.28
LED Forward Voltage (V)
Typical Turn-Off Time Distribution
(N=50, IF=5mA, IL=5mA)
5
0
1.25
Device Count (N)
Device Count (N)
Device Count (N)
Device Count (N)
30
Turn-Off Time (ms)
35
Typical Turn-On Time Distribution
(N=50, IF=5mA, IL=5mA)
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
IF=5mA
0.4
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1020N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
0.40
0.5
0.0
-0.5
-1.0
0.10
38.5
38.0
37.5
37.0
20
40
60
Temperature (ºC)
80
-20
0
20
40
60
Temperature (ºC)
80
0.75
0.50
0.25
100
-40
100
110
80
60
40
20
0
-40
-20
0
20
40
60
80
100
Temperature (ºC)
100
39.0
0
1.00
Typical Leakage Current vs. Temperature
Measured Across Pins 3&4
(IF=0mA, VL=30V)
39.5
-20
1.25
0.0
-40
Leakage Current (nA)
Blocking Voltage (VP)
0.20
Typical Blocking Voltage
vs. Temperature
(IL=1PA)
40.0
36.5
-40
0.25
0.15
-1.5
-0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20
Load Voltage (V)
40.5
0.35
0.30
Maximum Load Current
vs. Temperature
(IF=2mA)
1.50
Load Current (ADC)
On-Resistance (:)
Load Current (A)
1.0
Typical On-Resistance vs. Temperature
(IF=2mA, IL=0.5A)
Output Capacitance (pF)
1.5
Typical Load Voltage vs. Load Current
(IF=2mA)
Output Capacitance vs. Load Voltage
(IF=0mA, f=1MHz)
100
90
80
70
60
50
40
30
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
5
10
15
Load Voltage (V)
20
25
Energy Rating Curve
3.5
Current (A)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1020N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1020N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1020N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1020N
MECHANICAL DIMENSIONS
CPC1020N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
(0.2205)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
1.30
(0.0512)
2.184 Max
(0.086 Max)
2.54
(0.10)
Pin to package standoff:
0.0637 ± 0.0383
(0.0025 ± 0.0015)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
CPC1020NTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00
(0.472)
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1020N-R04
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
9/29/2014